AN-M2HD(MCP68): flashrom -V - flashrom

14 Feb 2014


      Dear Developer! Heres the outputs of the Abit AN-M2HD board. I cant wrote the Winbod chip. xubuntu@xubuntu:~/Desktop$ sudo flashrom -p internal -Eflashrom v0.9.6.1-r1563 on Linux 3.13.0-8-generic (x86_64)flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK.Found chipset "NVIDIA MCP67". Enabling flash write... This chipset is not really supported yet. Guesswork...Please send the output of "flashrom -V" to flashrom@flashrom.org withyour board name: flashrom -V as the subject to help us finish support for yourchipset. Thanks.OK.Found Winbond flash chip "W39V040B" (512 kB, LPC) at physical address 0xfff80000.Erasing and writing flash chip... Erase/write done.xubuntu@xubuntu:~/Desktop$ sudo flashrom -p internal -w JN.BIN flashrom v0.9.6.1-r1563 on Linux 3.13.0-8-generic (x86_64)flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK.Found chipset "NVIDIA MCP67". Enabling flash write... This ch
 ipset is not really supported yet. Guesswork...Please send the output of "flashrom -V" to flashrom@flashrom.org withyour board name: flashrom -V as the subject to help us finish support for yourchipset. Thanks.OK.Found Winbond flash chip "W39V040B" (512 kB, LPC) at physical address 0xfff80000.Flash image seems to be a legacy BIOS. Disabling coreboot-related checks.Reading old flash chip contents... done.Erasing and writing flash chip...  writing sector at 0x7fd89382a000 failed!Reading current flash chip contents... done.  writing sector at 0x7fd89382a000 failed!FAILED!Uh oh. Erase/write failed. Checking if anything changed.Good. It seems nothing was changed.Writing to the flash chip apparently didn&#39;t do anything.This means we have to add special support for your board, programmer or flash chip.Please report this on IRC at irc.freenode.net (channel #flashrom) ormail flashrom@flashrom.org!-------------------------------------------------------------------------------You may now re
 boot or simply leave the machine running.xub!
 untu@xubuntu:~/Desktop$ sudo flashrom -p internal -Vflashrom v0.9.6.1-r1563 on Linux 3.13.0-8-generic (x86_64)flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, GCC 4.7.1, little endianCommand line (3 args): flashrom -p internal -VCalibrating delay loop... OS timer resolution is 1 usecs, 388M loops per second, delay more than 10% too short (got 65% of expected delay), recalculating... 494M loops per second, delay more than 10% too short (got 84% of expected delay), recalculating... 509M loops per second, delay more than 10% too short (got 86% of expected delay), recalculating... 457M loops per second, delay more than 10% too short (got 77% of expected delay), recalculating... 511M loops per second, delay loop is unreliable, trying to continue 10 myus = 9 us, 100 myus = 86 us, 1000 myus = 852 us, 10000 myus = 8542 us, 4 myus = 5 us, OK.Initializing internal programmerNo coreboot table found.DMI string system-manufacturer: "
 ."DMI string system-product-name: "."DMI string system-version: "Unknow"DMI string baseboard-manufacturer: "http://www.abit.com.tw/%22DMI string baseboard-product-name: "AN-M2HD(MCP68)"DMI string baseboard-version: "1.x  "DMI string chassis-type: "Desktop"Found chipset "NVIDIA MCP67" with PCI ID 10de:0548. Enabling flash write... This chipset is not really supported yet. Guesswork...ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0Flash bus type is LPCFound SMBus device 10de:0542 at 00:01:1MCP SPI BAR is at 0xfec80000Strange. MCP SPI BAR is valid, but chipset apparently doesn&#39;t have SPI enabled.Please send the output of "flashrom -V" to flashrom@flashrom.org withyour board name: flashrom -V as the subject to help us finish support for yourchipset. Thanks.OK.The following protocols are supported: LPC.Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xda, id2 0x54Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1
  is normal flash content, id2 is normal flash content!
 Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xda, id2 0x54Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xda, id2 0x54Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xda, id2 0x54Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xda, id2 0x54Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xda, id2 0x54Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xda, id2 0x54Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash contentProbing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash contentProbing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash contentProbing for ST M50FLW040B, 5
 12 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash contentProbing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash contentProbing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash contentProbing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash contentProbing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xda, id2 0x54Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xda, id2 0x54Found Winbond flash chip "W39V040B" (512 kB, LPC) at physical address 0xfff80000.Lockout bits:Hardware bootblock locking (#TBL) is active.Hardware remaining chip locking (#WP) is active..Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xda, id2 0x54Probing for Winb
 ond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, !
 id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash contentProbing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xda, id2 0x54Found Winbond flash chip "W39V040B" (512 kB, LPC).No operations were specified.Restoring PCI config space for 00:01:0 reg 0x6dRestoring PCI config space for 00:01:0 reg 0x90Restoring PCI config space for 00:01:0 reg 0x8cRestoring PCI config space for 00:01:0 reg 0x88xubuntu@xubuntu:~/Desktop$  Thans