[commit] r1262 - trunk

[repository service]

Author: hailfinger
Date: Tue Feb 22 18:16:34 2011
New Revision: 1262
URL: http://flashrom.org/trac/flashrom/changeset/1262

Log:
Add generalized support for ITE IT8500/IT8502 embedded controllers.

The patch was developed by Google.
It was tested for IT8500E on a Chrome OS platform and may require
modification depending on ODM/OEM customization and EC firmware version.
This patch is not officially supported by ITE Tech Inc.

Signed-off-by: Donald Huang 
Signed-off-by: Yung-chieh Lo 
Signed-off-by: David Hendricks 
Acked-by: Carl-Daniel Hailfinger

Added:
   trunk/it85spi.c

Added: trunk/it85spi.c
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ trunk/it85spi.c	Tue Feb 22 18:16:34 2011	(r1262)
@@ -0,0 +1,262 @@
+/*
+ * This file is part of the flashrom project.
+ *
+ * Copyright (C) 2007, 2008, 2009 Carl-Daniel Hailfinger
+ * Copyright (C) 2008 Ronald Hoogenboom 
+ * Copyright (C) 2008 coresystems GmbH
+ * Copyright (C) 2010 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+ * Contains the ITE IT85* SPI specific routines
+ */
+
+#if defined(__i386__) || defined(__x86_64__)
+
+#include <string.h>
+#include <stdlib.h>
+#include "flash.h"
+#include "chipdrivers.h"
+#include "spi.h"
+#include "programmer.h"
+
+/* Constans for I/O ports */
+#define ITE_SUPERIO_PORT1	0x2e
+#define ITE_SUPERIO_PORT2	0x4e
+
+/* Legacy I/O */
+#define LEGACY_KBC_PORT		0x64
+
+/* Constants for Logical Device registers */
+#define LDNSEL			0x07
+#define CHIP_ID_BYTE1_REG	0x20
+#define CHIP_ID_BYTE2_REG	0x21
+#define CHIP_CHIP_VER_REG	0x22
+
+/* These are standard Super I/O 16-bit base address registers */
+#define SHM_IO_BAD0		0x60  /* big-endian, this is high bits */
+#define SHM_IO_BAD1		0x61
+
+/* IT8502 supports two access modes:
+ *   LPC_MEMORY: through the memory window in 0xFFFFFxxx (follow mode)
+ *   LPC_IO: through I/O port (so called indirect memory)
+ */
+#undef LPC_MEMORY
+#define LPC_IO
+
+#ifdef LPC_IO
+/* macro to fill in indirect-access registers. */
+#define INDIRECT_A0(base, value) OUTB(value, (base) + 0)  /* little-endian */
+#define INDIRECT_A1(base, value) OUTB(value, (base) + 1)
+#define INDIRECT_A2(base, value) OUTB(value, (base) + 2)
+#define INDIRECT_A3(base, value) OUTB(value, (base) + 3)
+#define INDIRECT_READ(base) INB((base) + 4)
+#define INDIRECT_WRITE(base, value) OUTB(value, (base) + 4)
+#endif  /* LPC_IO */
+
+#ifdef LPC_IO
+unsigned int shm_io_base;
+#endif
+unsigned char *ce_high, *ce_low;
+static int it85xx_scratch_rom_reenter = 0;
+
+uint16_t probe_id_ite85(uint16_t port)
+{
+	uint16_t id;
+
+	id = sio_read(port, CHIP_ID_BYTE1_REG) << 8 |
+	     sio_read(port, CHIP_ID_BYTE2_REG);
+
+	return id;
+}
+
+struct superio probe_superio_ite85xx(void)
+{
+	struct superio ret = {};
+	uint16_t ite_ports[] = {ITE_SUPERIO_PORT1, ITE_SUPERIO_PORT2, 0};
+	uint16_t *i = ite_ports;
+
+	ret.vendor = SUPERIO_VENDOR_ITE;
+	for (; *i; i++) {
+		ret.port = *i;
+		ret.model = probe_id_ite85(ret.port);
+		switch (ret.model >> 8) {
+		case 0x85:
+			msg_pinfo("Found EC: ITE85xx (Vendor:0x%02x,ID:0x%02x,"
+			          "Rev:0x%02x) on sio_port:0x%x.\n",
+			          ret.model >> 8, ret.model & 0xff,
+			          sio_read(ret.port, CHIP_CHIP_VER_REG),
+			          ret.port);
+			return ret;
+		}
+	}
+
+	/* No good ID found. */
+	ret.vendor = SUPERIO_VENDOR_NONE;
+	ret.port = 0;
+	ret.model = 0;
+	return ret;
+}
+
+/* IT8502 employs a scratch rom when flash is updating. Call the following two
+ * functions before/after flash erase/program. */
+void it85xx_enter_scratch_rom()
+{
+	if (it85xx_scratch_rom_reenter > 0) return;
+	it85xx_scratch_rom_reenter++;
+	OUTB(0xb4, LEGACY_KBC_PORT);
+}
+
+void it85xx_exit_scratch_rom()
+{
+	if (it85xx_scratch_rom_reenter <= 0) return;
+	it85xx_scratch_rom_reenter = 0;
+	OUTB(0xfe, LEGACY_KBC_PORT);
+}
+
+int it85xx_spi_common_init(void)
+{
+	chipaddr base;
+
+	msg_pdbg("%s():%d superio.vendor=0x%02x\n", __func__, __LINE__,
+	         superio.vendor);
+	if (superio.vendor != SUPERIO_VENDOR_ITE)
+		return 1;
+
+#ifdef LPC_IO
+	/* Get LPCPNP of SHM. That's big-endian */
+	sio_write(superio.port, LDNSEL, 0x0F); /* Set LDN to SHM (0x0F) */
+	shm_io_base = (sio_read(superio.port, SHM_IO_BAD0) << 8) +
+	              sio_read(superio.port, SHM_IO_BAD1);
+	msg_pdbg("%s():%d shm_io_base=0x%04x\n", __func__, __LINE__,
+	         shm_io_base);
+
+	/* These pointers are not used directly. They will be send to EC's
+	 * register for indirect access. */
+	base = 0xFFFFF000;
+	ce_high = ((unsigned char*)base) + 0xE00;  /* 0xFFFFFE00 */
+	ce_low = ((unsigned char*)base) + 0xD00;  /* 0xFFFFFD00 */
+
+	/* pre-set indirect-access registers since in most of cases they are
+	 * 0xFFFFxx00. */
+	INDIRECT_A0(shm_io_base, base & 0xFF);
+	INDIRECT_A2(shm_io_base, (base >> 16) & 0xFF);
+	INDIRECT_A3(shm_io_base, (base >> 24));
+#endif
+#ifdef LPC_MEMORY
+	base = (chipaddr)programmer_map_flash_region("flash base", 0xFFFFF000,
+	                                             0x1000);
+	msg_pdbg("%s():%d base=0x%08x\n", __func__, __LINE__,
+	         (unsigned int)base);
+	ce_high = (unsigned char*)(base + 0xE00);  /* 0xFFFFFE00 */
+	ce_low = (unsigned char*)(base + 0xD00);  /* 0xFFFFFD00 */
+#endif
+
+	/* Set this as spi controller. */
+	spi_controller = SPI_CONTROLLER_IT85XX;
+
+	return 0;
+}
+
+/* Called by programmer_entry .init */
+int it85xx_spi_init(void)
+{
+	int ret;
+
+	get_io_perms();
+	/* Probe for the Super I/O chip and fill global struct superio. */
+	probe_superio();
+	ret = it85xx_spi_common_init();
+	if (!ret) {
+		buses_supported = CHIP_BUSTYPE_SPI;
+	} else {
+		buses_supported = CHIP_BUSTYPE_NONE;
+	}
+	return ret;
+}
+
+/* Called by internal_init() */
+int it85xx_probe_spi_flash(const char *name)
+{
+	int ret;
+
+	if (!(buses_supported & CHIP_BUSTYPE_FWH)) {
+		msg_pdbg("%s():%d buses not support FWH\n", __func__, __LINE__);
+		return 1;
+	}
+	ret = it85xx_spi_common_init();
+	msg_pdbg("FWH: %s():%d ret=%d\n", __func__, __LINE__, ret);
+	if (!ret) {
+		msg_pdbg("%s():%d buses_supported=0x%x\n", __func__, __LINE__,
+		          buses_supported);
+		if (buses_supported & CHIP_BUSTYPE_FWH)
+			msg_pdbg("Overriding chipset SPI with IT85 FWH|SPI.\n");
+		buses_supported |= CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_SPI;
+	}
+	return ret;
+}
+
+int it85xx_shutdown(void)
+{
+	msg_pdbg("%s():%d\n", __func__, __LINE__);
+	it85xx_exit_scratch_rom();
+	return 0;
+}
+
+/* According to ITE 8502 document, the procedure to follow mode is following:
+ *   1. write 0x00 to LPC/FWH address 0xffff_fexxh (drive CE# high)
+ *   2. write data to LPC/FWH address 0xffff_fdxxh (drive CE# low and MOSI
+ *      with data)
+ *   3. read date from LPC/FWH address 0xffff_fdxxh (drive CE# low and get
+ *      data from MISO)
+ */
+int it85xx_spi_send_command(unsigned int writecnt, unsigned int readcnt,
+			const unsigned char *writearr, unsigned char *readarr)
+{
+	int i;
+
+	it85xx_enter_scratch_rom();
+	/* exit scratch rom ONLY when programmer shuts down. Otherwise, the
+	 * temporary flash state may halt EC. */
+
+#ifdef LPC_IO
+	INDIRECT_A1(shm_io_base, (((unsigned long int)ce_high) >> 8) & 0xff);
+	INDIRECT_WRITE(shm_io_base, 0xFF);  /* Write anything to this address.*/
+	INDIRECT_A1(shm_io_base, (((unsigned long int)ce_low) >> 8) & 0xff);
+#endif
+#ifdef LPC_MEMORY
+	*ce_high = 0;
+#endif
+	for (i = 0; i < writecnt; ++i) {
+#ifdef LPC_IO
+		INDIRECT_WRITE(shm_io_base, writearr[i]);
+#endif
+#ifdef LPC_MEMORY
+		*ce_low = writearr[i];
+#endif
+	}
+	for (i = 0; i < readcnt; ++i) {
+#ifdef LPC_IO
+		readarr[i] = INDIRECT_READ(shm_io_base);
+#endif
+#ifdef LPC_MEMORY
+		readarr[i] = *ce_low;
+#endif
+	}
+	return 0;
+}
+
+#endif