Author: uwe Date: Fri Mar 26 00:18:41 2010 New Revision: 985 URL: http://flashrom.org/trac/coreboot/changeset/985
Log: Polish the flashrom code comments and outputs a bit.
- Fix a number of typos (found via ispell).
- Use correct vendor names (as per their websites) consistently.
Signed-off-by: Uwe Hermann uwe@hermann-uwe.de Acked-by: Uwe Hermann uwe@hermann-uwe.de
Modified: trunk/README trunk/board_enable.c trunk/coreboot_tables.h trunk/flashchips.c trunk/flashrom.8 trunk/ichspi.c trunk/jedec.c trunk/serprog-protocol.txt trunk/serprog.c trunk/stm50flw0x0x.c
Modified: trunk/README ============================================================================== --- trunk/README Thu Mar 25 10:23:46 2010 (r984) +++ trunk/README Fri Mar 26 00:18:41 2010 (r985) @@ -121,6 +121,6 @@
#flashrom at irc.freenode.net
-The Mailing list addess is +The mailing list address is
flashrom@flashrom.org
Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Thu Mar 25 10:23:46 2010 (r984) +++ trunk/board_enable.c Fri Mar 26 00:18:41 2010 (r985) @@ -341,7 +341,7 @@ }
/** - * Suited for Asus M2V-MX: VIA K8M890 + VT8237A + IT8716F + * Suited for ASUS M2V-MX: VIA K8M890 + VT8237A + IT8716F */ static int via_vt823x_gpio5_raise(const char *name) { @@ -350,7 +350,7 @@ }
/** - * Suited for VIAs EPIA N & NL. + * Suited for VIA EPIA N & NL. */ static int via_vt823x_gpio9_raise(const char *name) { @@ -358,7 +358,7 @@ }
/** - * Suited for VIAs EPIA M and MII, and maybe other CLE266 based EPIAs. + * Suited for VIA EPIA M and MII, and maybe other CLE266 based EPIAs. * * We don't need to do this for EPIA M when using coreboot, GPIO15 is never * lowered there. @@ -484,7 +484,7 @@ }
/** - * Suited for Shuttle FN25 (SN25P): AMD S939 + Nvidia CK804 (nForce4). + * Suited for Shuttle FN25 (SN25P): AMD S939 + NVIDIA CK804 (nForce4). */ static int board_shuttle_fn25(const char *name) { @@ -532,7 +532,7 @@ break; default: fprintf(stderr, - "\nERROR: no nVidia LPC/SMBus controller found.\n"); + "\nERROR: no NVIDIA LPC/SMBus controller found.\n"); return -1; } break; @@ -553,7 +553,7 @@
/** * Suited for ASUS A8N-LA: nVidia MCP51. - * Suited for ASUS M2NBP-VM CSM: nVidia MCP51. + * Suited for ASUS M2NBP-VM CSM: NVIDIA MCP51. */ static int nvidia_mcp_gpio0_raise(const char *name) { @@ -569,8 +569,8 @@ }
/** - * Suited for MSI K8N Neo4: nVidia CK804. - * Suited for MSI K8N GM2-L: nVidia MCP51. + * Suited for MSI K8N Neo4: NVIDIA CK804. + * Suited for MSI K8N GM2-L: NVIDIA MCP51. */ static int nvidia_mcp_gpio2_raise(const char *name) { @@ -643,7 +643,7 @@ }
/** - * Helper function to raise/drop a given gpo line on intel PIIX4{,E,M} + * Helper function to raise/drop a given gpo line on Intel PIIX4{,E,M}. */ static int intel_piix4_gpo_set(unsigned int gpo, int raise) { @@ -731,11 +731,11 @@ }
/** - * Set a GPIO line on a given intel ICH LPC controller. + * Set a GPIO line on a given Intel ICH LPC controller. */ static int intel_ich_gpio_set(int gpio, int raise) { - /* table mapping the different intel ICH LPC chipsets. */ + /* Table mapping the different Intel ICH LPC chipsets. */ static struct { uint16_t id; uint8_t base_reg; @@ -801,8 +801,8 @@ return -1; }
- /* According to the datasheets, all intel ICHs have the gpio bar 5:1 - strapped to zero. From some mobile ich9 version on, this becomes + /* According to the datasheets, all Intel ICHs have the GPIO bar 5:1 + strapped to zero. From some mobile ICH9 version on, this becomes 6:1. The mask below catches all. */ base = pci_read_word(dev, intel_ich_gpio_table[i].base_reg) & 0xFFC0;
@@ -949,9 +949,9 @@
/** * Suited for: - * - Asus P4B266LM (Sony Vaio PCV-RX650): socket478 + 845D + ICH2. - * - Asus P4C800-E Deluxe: socket478 + 875P + ICH5. - * - Asus P4P800-E Deluxe: Intel socket478 + 865PE + ICH5R. + * - ASUS P4B266LM (Sony Vaio PCV-RX650): socket478 + 845D + ICH2. + * - ASUS P4C800-E Deluxe: socket478 + 875P + ICH5. + * - ASUS P4P800-E Deluxe: Intel socket478 + 865PE + ICH5R. */ static int intel_ich_gpio21_raise(const char *name) { @@ -960,9 +960,9 @@
/** * Suited for: - * - Asus P4B266: socket478 + intel 845D + ICH2. - * - Asus P4B533-E: socket478 + 845E + ICH4 - * - Asus P4B-MX variant in HP Vectra VL420 SFF: socket478 + 845D + ICH2 + * - ASUS P4B266: socket478 + Intel 845D + ICH2. + * - ASUS P4B533-E: socket478 + 845E + ICH4 + * - ASUS P4B-MX variant in HP Vectra VL420 SFF: socket478 + 845D + ICH2 */ static int intel_ich_gpio22_raise(const char *name) { @@ -986,7 +986,7 @@
/** * Suited for: - * - Dell Poweredge 1850: Intel PPGA604 + E7520 + ICH5R. + * - Dell PowerEdge 1850: Intel PPGA604 + E7520 + ICH5R. * - ASRock P4i65GV: Intel Socket478 + 865GV + ICH5R. */ static int intel_ich_gpio23_raise(const char *name) @@ -1197,7 +1197,7 @@ }
/** - * Suited for Asus A7V8X: VIA KT400 + VT8235 + IT8703F-A + * Suited for ASUS A7V8X: VIA KT400 + VT8235 + IT8703F-A */ static int board_asus_a7v8x(const char *name) { @@ -1291,8 +1291,8 @@
/** * Suited for: - * - Asus A7V600-X: VIA KT600 + VT8237 + IT8712F - * - Asus A7V8X-X: VIA KT400 + VT8235 + IT8712F + * - ASUS A7V600-X: VIA KT600 + VT8237 + IT8712F + * - ASUS A7V8X-X: VIA KT400 + VT8235 + IT8712F */ static int it8712f_gpio3_1_raise(const char *name) { @@ -1319,7 +1319,7 @@ * * If PCI IDs are not sufficient for board matching, the match can be further * constrained by a string that has to be present in the DMI database for - * the baseboard or the system entry. The pattern is matched by case sensitve + * the baseboard or the system entry. The pattern is matched by case sensitive * substring match, unless it is anchored to the beginning (with a ^ in front) * or the end (with a $ at the end). Both anchors may be specified at the * same time to match the full field.
Modified: trunk/coreboot_tables.h ============================================================================== --- trunk/coreboot_tables.h Thu Mar 25 10:23:46 2010 (r984) +++ trunk/coreboot_tables.h Fri Mar 26 00:18:41 2010 (r985) @@ -27,11 +27,11 @@ /* The coreboot table information is for conveying information * from the firmware to the loaded OS image. Primarily this * is expected to be information that cannot be discovered by - * other means, such as quering the hardware directly. + * other means, such as querying the hardware directly. * * All of the information should be Position Independent Data. * That is it should be safe to relocated any of the information - * without it's meaning/correctnes changing. For table that + * without it's meaning/correctness changing. For table that * can reasonably be used on multiple architectures the data * size should be fixed. This should ease the transition between * 32 bit and 64 bit architectures etc. @@ -48,7 +48,7 @@ * table entry is required or not. This should remove much of the * long term compatibility burden as table entries which are * irrelevant or have been replaced by better alternatives may be - * dropped. Of course it is polite and expidite to include extra + * dropped. Of course it is polite and expedite to include extra * table entries and be backwards compatible, but it is not required. */
@@ -78,10 +78,10 @@ uint32_t table_entries; };
-/* Every entry in the boot enviroment list will correspond to a boot +/* Every entry in the boot environment list will correspond to a boot * info record. Encoding both type and size. The type is obviously * so you can tell what it is. The size allows you to skip that - * boot enviroment record if you don't know what it easy. This allows + * boot environment record if you don't know what it easy. This allows * forward compatibility with records not yet defined. */ struct lb_record {
Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Thu Mar 25 10:23:46 2010 (r984) +++ trunk/flashchips.c Fri Mar 26 00:18:41 2010 (r985) @@ -1133,7 +1133,7 @@ },
/* The next two chip definitions have top/bottom boot blocks, but has no - device differenciation between the two */ + device differentiation between the two */ { .vendor = "AMIC", .name = "A25L40PT",
Modified: trunk/flashrom.8 ============================================================================== --- trunk/flashrom.8 Thu Mar 25 10:23:46 2010 (r984) +++ trunk/flashrom.8 Fri Mar 26 00:18:41 2010 (r985) @@ -174,7 +174,7 @@ Show version information and exit. .SH PROGRAMMER SPECIFIC INFO Some programmer drivers accept further parameters to set programmer-specific -parameters. These parameters are seperated from the programmer name by a +parameters. These parameters are separated from the programmer name by a colon. While some programmers take arguments at fixed positions, other programmers use a key/value interface in which the key and value is separated by an equal sign and different pairs are separated by a comma or a colon. @@ -298,8 +298,8 @@ the source distribution. .TP .BR "buspiratespi " programmer -A required dev parameter specifyies the Bus Pirate device node and an optional -spispeed parameter specifyies the frequency of the SPI bus. The parameter +A required dev parameter specifies the Bus Pirate device node and an optional +spispeed parameter specifies the frequency of the SPI bus. The parameter delimiter is a comma. Syntax is .sp .B "flashrom -p buspiratespi:dev=/dev/device,spispeed=frequency"
Modified: trunk/ichspi.c ============================================================================== --- trunk/ichspi.c Thu Mar 25 10:23:46 2010 (r984) +++ trunk/ichspi.c Fri Mar 26 00:18:41 2010 (r985) @@ -536,7 +536,7 @@
/* clear error status registers */ temp32 |= (SSFS_CDS + SSFS_FCERR); - /* USE 20 MhZ */ + /* Use 20 MHz */ temp32 |= SSFC_SCF_20MHZ;
if (datalength != 0) {
Modified: trunk/jedec.c ============================================================================== --- trunk/jedec.c Thu Mar 25 10:23:46 2010 (r984) +++ trunk/jedec.c Fri Mar 26 00:18:41 2010 (r985) @@ -345,7 +345,7 @@ chipaddr d = dst;
retry: - /* Issue JEDEC Start Program comand */ + /* Issue JEDEC Start Program command */ start_program_jedec_common(flash, mask);
/* transfer data from source to destination */
Modified: trunk/serprog-protocol.txt ============================================================================== --- trunk/serprog-protocol.txt Thu Mar 25 10:23:46 2010 (r984) +++ trunk/serprog-protocol.txt Fri Mar 26 00:18:41 2010 (r985) @@ -46,14 +46,14 @@ cmd 7 support: byte 0 bit 7 cmd 8 support: byte 1 bit 0, and so on. 0x04 (Q_SERBUF): - If the programmer has guaranteedly working flow control, + If the programmer has a guaranteed working flow control, it should return a big bogus value - eg 0xFFFF. 0x05 (Q_BUSTYPE): The bit's are defined as follows: bit 0: PARALLEL, bit 1: LPC, bit 2: FWH, bit 3: SPI (if ever supported). 0x06 (Q_CHIPSIZE): Only applicable to parallel programmers. - An LPC/FHW/SPI-programmer can report this as not supported in the command bitmap. + An LPC/FWH/SPI-programmer can report this as not supported in the command bitmap. 0x08 (Q_WRNMAXLEN): If a programmer reports a bigger maximum write-n length than the serial buffer size, it is assumed that the programmer can process the data fast enough to take in the
Modified: trunk/serprog.c ============================================================================== --- trunk/serprog.c Thu Mar 25 10:23:46 2010 (r984) +++ trunk/serprog.c Fri Mar 26 00:18:41 2010 (r985) @@ -66,7 +66,7 @@ /* Bitmap of supported commands */ static uint8_t sp_cmdmap[32];
-/* sp_prev_was_write used to detect writes with continouous addresses +/* sp_prev_was_write used to detect writes with contiguous addresses and combine them to write-n's */ static int sp_prev_was_write = 0; /* sp_write_n_addr used as the starting addr of the currently @@ -138,7 +138,7 @@ return -1; }
-/* Synchronize: a bit tricky algorhytm that tries to (and in my tests has * +/* Synchronize: a bit tricky algorithm that tries to (and in my tests has * * always succeeded in) bring the serial protocol to known waiting-for- * * command state - uses nonblocking read - rest of the driver uses * * blocking read - TODO: add an alarm() timer for the rest of the app on * @@ -534,7 +534,7 @@ if (sp_device_opbuf_size <= (sp_opbuf_usage + bytes_to_be_added)) { sp_execute_opbuf(); /* If this happens in the mid of an page load the page load * - * will propably fail. */ + * will probably fail. */ msg_pdbg(MSGHEADER "Warning: executed operation buffer due to size reasons\n"); } } @@ -589,7 +589,7 @@ return c; }
-/* Local version that really does the job, doesnt care of max_read_n. */ +/* Local version that really does the job, doesn't care of max_read_n. */ static void sp_do_read_n(uint8_t * buf, const chipaddr addr, size_t len) { int rd_bytes = 0;
Modified: trunk/stm50flw0x0x.c ============================================================================== --- trunk/stm50flw0x0x.c Thu Mar 25 10:23:46 2010 (r984) +++ trunk/stm50flw0x0x.c Fri Mar 26 00:18:41 2010 (r985) @@ -49,7 +49,7 @@ * to them. The size of the locking sectors depends on the type * of chip. * - * Sometimes, the BIOS does this for you; so you propably + * Sometimes, the BIOS does this for you; so you probably * don't need to worry about that. */
-
repository service