MSI GF615M-P33: flashrom -V

[Kim Johansson]

flashrom v0.9.5.2-r1516 on Linux 2.6.35 (i686), built with libpci 2.2.10, GCC 4.2.4, little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 1 usecs, 1276M loops per second, delay more than 10% too short (got 85% of expected delay), recalculating... 1271M loops per second, delay more than 10% too short (got 85% of expected delay), recalculating... 1279M loops per second, delay more than 10% too short (got 85% of expected delay), recalculating... 1296M loops per second, delay more than 10% too short (got 86% of expected delay), recalculating... 1280M loops per second, 10 myus = 8 us, 100 myus = 85 us, 1000 myus = 929 us, 10000 myus = 16865 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "MICRO-STAR INTERNATIONAL CO.,LTD"
DMI string system-product-name: "MS-7597"
DMI string system-version: "1.0"
DMI string baseboard-manufacturer: "MICRO-STAR INTERNATIONAL CO.,LTD"
DMI string baseboard-product-name: "GF615M-P33  (MS-7597)"
DMI string baseboard-version: "1.0"
DMI string chassis-type: "Desktop"
Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0. Enabling flash write... This chipset is not really supported yet. Guesswork...
ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0
Flash bus type is SPI
SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to [e-mail], thanks!
Found SMBus device 10de:03eb at 00:01:1
MCP SPI BAR is at 0xfec80000
SPI control is 0x0012, req=0, gnt=0
Please send the output of "flashrom -V" to [e-mail] with
your board name: flashrom -V as the subject to help us finish support for your
chipset. Thanks.
OK.
The following protocols are supported: SPI.
Probing for AMIC A25L05PT, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L05PU, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L10PT, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L10PU, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L20PT, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L20PU, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L40PT, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L40PU, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L80P, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L16PT, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L16PU, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L512, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L010, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L020, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L040, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L080, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L016, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25L032, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for AMIC A25LQ032, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25DF021, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25DF041A, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25DF081, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25DF081A, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25DF161, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25DF321, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25DF321A, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25DF641(A), 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25DQ161, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25F512B, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25FS010, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT25FS040, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT26DF041, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT26DF081A, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT26DF161, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT26DF161A, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT26F004, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT45CS1282, 16896 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT45DB011D, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT45DB021D, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT45DB041D, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT45DB081D, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT45DB161D, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT45DB321C, 4224 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT45DB321D, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel AT45DB642D, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for EMST F25L008A, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B05, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B05T, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B10T, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B20T, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B40T, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B80T, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B16T, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B32T, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25B64T, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25F05, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25F10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25F20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25F40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25F80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25F16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25F32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25Q40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25Q80(A), 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25Q16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25Q32(A/B), 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25Q64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25Q128, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon EN25QH16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L512, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L1005, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L2005, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L4005, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L8005, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L1605, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L1635D, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L1635E, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L3205, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L3235D, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L6405, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix MX25L12805, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Numonyx M25PE10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Numonyx M25PE20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Numonyx M25PE40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Numonyx M25PE80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Numonyx M25PE16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for PMC Pm25LV010, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for PMC Pm25LV016B, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for PMC Pm25LV020, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for PMC Pm25LV040, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for PMC Pm25LV080B, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for PMC Pm25LV512, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Sanyo LF25FW203A, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Spansion S25FL004A, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Spansion S25FL008A, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Spansion S25FL016A, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Spansion S25FL032A, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Spansion S25FL064A, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0xff, id2 0xff
Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0xff, id2 0xff
Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xff, id2 0xff
Probing for SST SST25VF016B, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for SST SST25VF032B, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for SST SST25VF064C, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xff, id2 0xff
Probing for SST SST25VF040B, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xff, id2 0xff
Probing for SST SST25VF080B, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for ST M25P05-A, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for ST M25P05, 64 kB: probe_spi_res1: id 0xff
Probing for ST M25P10-A, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for ST M25P10, 128 kB: probe_spi_res1: id 0xff
Probing for ST M25P20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for ST M25P40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for ST M25P40-old, 512 kB: probe_spi_res1: id 0xff
Probing for ST M25P80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for ST M25P16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for ST M25P32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for ST M25P64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for ST M25P128, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for ST M25PX16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for ST M25PX32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for ST M25PX64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25Q80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25Q16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25Q32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25Q64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25Q128, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25X10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25X20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25X40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25X80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25X16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25X32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Winbond W25X64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Unknown SFDP-capable chip, 0 kB: No SFDP signature found.
Probing for AMIC unknown AMIC SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Atmel unknown Atmel SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Eon unknown Eon SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Macronix unknown Macronix SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for PMC unknown PMC SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for SST unknown SST SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for ST unknown ST SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Sanyo unknown Sanyo SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Generic unknown SPI chip (RDID), 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xff, id2 0xff
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically.

[Stefan Tauner]

On Sat, 10 Mar 2012 21:10:06 +0100
Kim Johansson  wrote:
> flashrom v0.9.5.2-r1516 on Linux 2.6.35 (i686), built with libpci 2.2.10, GCC 4.2.4, little endian
> flashrom is free software, get the source code at http://www.flashrom.org
>
> Calibrating delay loop... OS timer resolution is 1 usecs, 1276M loops per second, delay more than 10% too short (got 85% of expected delay), recalculating... 1271M loops per second, delay more than 10% too short (got 85% of expected delay), recalculating... 1279M loops per second, delay more than 10% too short (got 85% of expected delay), recalculating... 1296M loops per second, delay more than 10% too short (got 86% of expected delay), recalculating... 1280M loops per second, 10 myus = 8 us, 100 myus = 85 us, 1000 myus = 929 us, 10000 myus = 16865 us, 4 myus = 4 us, OK.
> Initializing internal programmer
> No coreboot table found.
> DMI string system-manufacturer: "MICRO-STAR INTERNATIONAL CO.,LTD"
> DMI string system-product-name: "MS-7597"
> DMI string system-version: "1.0"
> DMI string baseboard-manufacturer: "MICRO-STAR INTERNATIONAL CO.,LTD"
> DMI string baseboard-product-name: "GF615M-P33  (MS-7597)"
> DMI string baseboard-version: "1.0"
> DMI string chassis-type: "Desktop"
> Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0. Enabling flash write... This chipset is not really supported yet. Guesswork...
> ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0
> Flash bus type is SPI
> SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to [e-mail], thanks!
> Found SMBus device 10de:03eb at 00:01:1
> MCP SPI BAR is at 0xfec80000
> SPI control is 0x0012, req=0, gnt=0
> Please send the output of "flashrom -V" to [e-mail] with
> your board name: flashrom -V as the subject to help us finish support for your
> chipset. Thanks.
> OK.
> The following protocols are supported: SPI.
> […]
> No EEPROM/flash device found.
> Note: flashrom can never write if the flash chip isn't found automatically.

hello kim and thanks for your report!

your log looks suspicious, maybe you have found a bug in our MCP61 code
or the flash is not attached to the southbridge, but the fintek chip.
could you please send us the output of "superiotool -dV", thanks.

MSI GF615M-P33: superiotool -dV

[Kim Johansson]

Den Tuesday 13 March 2012 01.16.26 skrev Stefan Tauner:
> On Sat, 10 Mar 2012 21:10:06 +0100
>
> Kim Johansson  wrote:
> > flashrom v0.9.5.2-r1516 on Linux 2.6.35 (i686), built with libpci 2.2.10,
> > GCC 4.2.4, little endian flashrom is free software, get the source code
> > at http://www.flashrom.org
> >
> > Calibrating delay loop... OS timer resolution is 1 usecs, 1276M loops per
> > second, delay more than 10% too short (got 85% of expected delay),
> > recalculating... 1271M loops per second, delay more than 10% too short
> > (got 85% of expected delay), recalculating... 1279M loops per second,
> > delay more than 10% too short (got 85% of expected delay),
> > recalculating... 1296M loops per second, delay more than 10% too short
> > (got 86% of expected delay), recalculating... 1280M loops per second, 10
> > myus = 8 us, 100 myus = 85 us, 1000 myus = 929 us, 10000 myus = 16865 us,
> > 4 myus = 4 us, OK. Initializing internal programmer
> > No coreboot table found.
> > DMI string system-manufacturer: "MICRO-STAR INTERNATIONAL CO.,LTD"
> > DMI string system-product-name: "MS-7597"
> > DMI string system-version: "1.0"
> > DMI string baseboard-manufacturer: "MICRO-STAR INTERNATIONAL CO.,LTD"
> > DMI string baseboard-product-name: "GF615M-P33  (MS-7597)"
> > DMI string baseboard-version: "1.0"
> > DMI string chassis-type: "Desktop"
> > Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0. Enabling flash
> > write... This chipset is not really supported yet. Guesswork... ISA/LPC
> > bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0
> > Flash bus type is SPI
> > SPI on this chipset is WIP. Please report any success or failure by
> > mailing us the verbose output to [e-mail], thanks! Found
> > SMBus device 10de:03eb at 00:01:1
> > MCP SPI BAR is at 0xfec80000
> > SPI control is 0x0012, req=0, gnt=0
> > Please send the output of "flashrom -V" to [e-mail] with
> > your board name: flashrom -V as the subject to help us finish support for
> > your chipset. Thanks.
> > OK.
> > The following protocols are supported: SPI.
> > […]
> > No EEPROM/flash device found.
> > Note: flashrom can never write if the flash chip isn't found
> > automatically.
>
> hello kim and thanks for your report!
>
> your log looks suspicious, maybe you have found a bug in our MCP61 code
> or the flash is not attached to the southbridge, but the fintek chip.
> could you please send us the output of "superiotool -dV", thanks.

MSI GF615M-P33: superiotool -dV

[Carl-Daniel Hailfinger]

Hi Kim,

Am 13.03.2012 09:39 schrieb Kim Johansson:
> Den Tuesday 13 March 2012 01.16.26 skrev Stefan Tauner:
> > On Sat, 10 Mar 2012 21:10:06 +0100
> >
> > Kim Johansson  wrote:
> > > flashrom v0.9.5.2-r1516 on Linux 2.6.35 (i686)
> > >
> > > Calibrating delay loop... OK. Initializing internal programmer
> > > DMI string system-manufacturer: "MICRO-STAR INTERNATIONAL CO.,LTD"
> > > DMI string system-product-name: "MS-7597"
> > > DMI string system-version: "1.0"
> > > DMI string baseboard-manufacturer: "MICRO-STAR INTERNATIONAL CO.,LTD"
> > > DMI string baseboard-product-name: "GF615M-P33  (MS-7597)"
> > > DMI string baseboard-version: "1.0"
> > > DMI string chassis-type: "Desktop"
> > > Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0. Enabling flash
> > > write... This chipset is not really supported yet. Guesswork... ISA/LPC
> > > bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0
> > > Flash bus type is SPI

Not good. This bit usually is a very good indicator that the flash chip
is attached via chipset SPI, not via LPC (as would be the case with
flash translation in the Super I/O chip).
> > > SMBus device 10de:03eb at 00:01:1
> > > MCP SPI BAR is at 0xfec80000
> > > SPI control is 0x0012, req=0, gnt=0
> > > Please send the output of "flashrom -V" to [e-mail] with
> > > your board name: flashrom -V as the subject to help us finish support for
> > > your chipset. Thanks.
> > > OK.
> > > The following protocols are supported: SPI.
> > > […]
> > > No EEPROM/flash device found.
> >
> > your log looks suspicious, maybe you have found a bug in our MCP61 code
> > or the flash is not attached to the southbridge, but the fintek chip.
> > could you please send us the output of "superiotool -dV", thanks.
>
> superiotool
> [...]
> Probing for Fintek Super I/O at 0x4e...
> Found Fintek F71889 (vid=0x3419, id=0x2307) at 0x4e
> Register dump:
> idx 20 21 23 24 25 26 27 28  2a 2b 2c 2d
> val 07 23 19 34 00 80 50 00  c0 c0 00 08
> def 07 23 19 34 00 00 00 00  f0 30 00 08
> LDN 0x00 (Floppy)
> idx 30 60 61 70 74 f0 f2 f4
> val 01 03 f0 06 02 0e ff 00
> def 01 03 f0 06 02 0e 03 00
> LDN 0x01 (COM1)
> idx 30 60 61 70 f0
> val 01 03 f8 04 00
> def 01 03 f8 04 00
> LDN 0x02 (COM2)
> idx 30 60 61 70 f0 f1
> val 00 02 f8 03 00 44
> def 01 02 f8 03 00 04
> LDN 0x03 (Parallel port)
> idx 30 60 61 70 74 f0
> val 01 03 78 07 04 3c
> def 01 03 78 07 03 42
> LDN 0x04 (Hardware monitor)
> idx 30 60 61 70
> val 01 0a 00 00
> def 01 02 95 00
> LDN 0x05 (Keyboard)
> idx 30 60 61 70 72 fe
> val 01 00 60 01 0c 01
> def 01 00 60 01 0c 81
> LDN 0x06 (GPIO)
> idx 80 81 82 83 90 91 92 93  a0 a1 a2 a3 b0 b1 b2 c0  c1 c2 c3 d0 d1 d2 d3 e0  e1 e2 e3 f0 f1 f2 f3 fe  ff
> val 00 ff 00 00 00 ff ff 00  00 1f 1f 00 00 ff 00 00  ff ff 00 80 ff 9a 00 08  7f 68 00 40 7f 50 40 15  1c
> def 00 ff NA 00 00 ff NA 00  00 1f NA 00 00 ff NA 00  ff NA 00 00 ff NA 00 00  7f NA 00 00 7f NA 00 00  00
> LDN 0x07 (VID)
> idx 30 60 61
> val 00 0a e0
> def 00 00 00
> LDN 0x08 (SPI)
> idx f0 f1 f2 f3 f4 f5 f6 f7  f8 fa fb fc fd fe ff
> val 00 04 01 70 f8 00 00 08  00 00 00 00 00 00 00
> def 00 RR 01 00 00 00 00 00  00 00 00 00 00 00 00
> LDN 0x0a (PME, ACPI)
> idx 30 f0 f1 f4 f5 f6
> val 01 00 6b 06 1c 07
> def 00 00 00 26 1c 07
> LDN 0x0b (VREF)
> idx f0 f1 f2 f3 ff
> val 64 64 64 00 00
> def 64 64 64 00 00

NOLDN register 0x27 indicates that the Fintek Super I/O chip indeed has
SPI translation switched on.

Could you try this patch against latest flashrom and report the verbose
output of flashrom?
http://patchwork.coreboot.org/patch/3440/ (click on the "patch" link in
the line which starts with "Download").
Instead of downloading manually, you could also run the following
command in your flashrom source tree:
curl -s http://patchwork.coreboot.org/patch/3440/raw/%7Cpatch -p1

That patch will not magically add the needed feature to flashrom, but it
will show us what to expect and how to proceed.

Regards,
Carl-Daniel