This patch should have all chips from A to M converted to struct block erasers.
Converted chips to block_erasers: ASD AE49F2008 AMIC A25L40P(T/U) AMIC A49LF040A EMST F49B002UA Eon EN25B05 Eon EN25B10 Eon EN25B20 Eon EN25B40 Eon EN25B80 Eon EN25B16 Eon EN25B32 Eon EN25B64 Eon EN25D16 Eon EN25F05 Eon EN25F10 Eon EN25F20 Eon EN25F40 Eon EN25F80 Eon EN25F16 Eon EN25F32 Intel 28F001BX-B Intel 28F001BX-T Intel 82802AB Intel 82802AC Macronix MX25L1635D Macronix MX25L3235D Macronix MX25L6405 Macronix MX25L12805 Macronix MX29F001B Macronix MX29F001T Macronix MX29LV040
Added new chips (according to datasheets): Eon EN25B05T Eon EN25B10T Eon EN25B20T Eon EN25B40T Eon EN25B80T Eon EN25B16T Eon EN25B32T Eon EN25B64T
Implement fixes for jedec probe by Carl-Daniel. Added minor Device IDs for Eon EN25Bxx{T,B} chips.
Signed-off-by: Sean Nelson audiohacked@gmail.com
On 1/8/10 2:33 PM, Sean Nelson wrote:
This patch should have all chips from A to M converted to struct block erasers.
Converted chips to block_erasers: ASD AE49F2008 AMIC A25L40P(T/U) AMIC A49LF040A EMST F49B002UA Eon EN25B05 Eon EN25B10 Eon EN25B20 Eon EN25B40 Eon EN25B80 Eon EN25B16 Eon EN25B32 Eon EN25B64 Eon EN25D16 Eon EN25F05 Eon EN25F10 Eon EN25F20 Eon EN25F40 Eon EN25F80 Eon EN25F16 Eon EN25F32 Intel 28F001BX-B Intel 28F001BX-T Intel 82802AB Intel 82802AC Macronix MX25L1635D Macronix MX25L3235D Macronix MX25L6405 Macronix MX25L12805 Macronix MX29F001B Macronix MX29F001T Macronix MX29LV040
Added new chips (according to datasheets): Eon EN25B05T Eon EN25B10T Eon EN25B20T Eon EN25B40T Eon EN25B80T Eon EN25B16T Eon EN25B32T Eon EN25B64T
Implement fixes for jedec probe by Carl-Daniel. Added minor Device IDs for Eon EN25Bxx{T,B} chips.
Signed-off-by: Sean Nelson audiohacked@gmail.com
Updated patch sans jedec changes.
On 08.01.2010 23:33, Sean Nelson wrote:
This patch should have all chips from A to M converted to struct block erasers.
Converted chips to block_erasers: ASD AE49F2008 AMIC A25L40P(T/U) AMIC A49LF040A EMST F49B002UA Eon EN25B05 Eon EN25B10 Eon EN25B20 Eon EN25B40 Eon EN25B80 Eon EN25B16 Eon EN25B32 Eon EN25B64 Eon EN25D16 Eon EN25F05 Eon EN25F10 Eon EN25F20 Eon EN25F40 Eon EN25F80 Eon EN25F16 Eon EN25F32 Intel 28F001BX-B Intel 28F001BX-T Intel 82802AB Intel 82802AC Macronix MX25L1635D Macronix MX25L3235D Macronix MX25L6405 Macronix MX25L12805 Macronix MX29F001B Macronix MX29F001T Macronix MX29LV040
Added new chips (according to datasheets): Eon EN25B05T Eon EN25B10T Eon EN25B20T Eon EN25B40T Eon EN25B80T Eon EN25B16T Eon EN25B32T Eon EN25B64T
Implement fixes for jedec probe by Carl-Daniel.
These jedec fixes are logically separate. I'd like to commit them separately to make tracking easier.
Added minor Device IDs for Eon EN25Bxx{T,B} chips.
Signed-off-by: Sean Nelson audiohacked@gmail.com
Please don't get me wrong, a lot of stuff in the review below isn't actually affecting any of the code you wrote, it is just me reviewing the code in the general vincinity. Feel free to ignore that stuff. I just thought I'd write it down in case someone motivated comes along and wants to fix that up.
diff --git a/82802ab.c b/82802ab.c index 58d3467..0e71975 100644 --- a/82802ab.c +++ b/82802ab.c @@ -82,44 +82,44 @@ uint8_t wait_82802ab(chipaddr bios) while ((chip_readb(bios) & 0x80) == 0) ; }
status = chip_readb(bios);
/* Reset to get a clean state */ chip_writeb(0xFF, bios);
return status; }
-int erase_82802ab_block(struct flashchip *flash, int offset) +int erase_82802ab_block(struct flashchip *flash, unsigned int page, unsigned int pagesize) {
- chipaddr bios = flash->virtual_memory + offset;
- chipaddr wrprotect = flash->virtual_registers + offset + 2;
chipaddr bios = flash->virtual_memory;
chipaddr wrprotect = flash->virtual_registers + page + 2; uint8_t status;
// clear status register
- chip_writeb(0x50, bios);
chip_writeb(0x50, bios + page);
// clear write protect chip_writeb(0, wrprotect);
// now start it
- chip_writeb(0x20, bios);
- chip_writeb(0xd0, bios);
chip_writeb(0x20, bios + page);
chip_writeb(0xd0, bios + page); programmer_delay(10);
// now let's see what the register is
- status = wait_82802ab(flash->virtual_memory);
- status = wait_82802ab(bios); print_82802ab_status(status);
- if (check_erased_range(flash, offset, flash->page_size)) {
if (check_erased_range(flash, page, pagesize)) { fprintf(stderr, "ERASE FAILED!\n"); return -1; } printf("DONE BLOCK 0x%x\n", offset);
return 0;
}
int erase_82802ab(struct flashchip *flash) { int i; diff --git a/flashchips.c b/flashchips.c index e6c4b86..0500be4 100644 --- a/flashchips.c +++ b/flashchips.c @@ -275,23 +275,38 @@ struct flashchip flashchips[] = { { .vendor = "ASD", .name = "AE49F2008", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ASD_ID, .model_id = ASD_AE49F2008,
Do you have a datasheet for that chip? I was unable to find one. To be honest, I do not think this ID is even valid. IMHO someone mistook a LHA header for an ID and back then my code to check for such mistakes didn't exist yet. I'm tempted to kill this chip altogether. Not something you have to fix, I just wanted to record this for posterity.
.total_size = 256, .page_size = 128, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_FIXME,
.erase = erase_chip_jedec,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{96 * 1024, 1},
{128 * 1024, 1},
The eraseblocks suggest a bottom boot block which is highly unusual in the x86 market.
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec, .read = read_memmapped, },
{ .vendor = "Atmel", .name = "AT25DF021", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ATMEL_ID, .model_id = AT_25DF021, .total_size = 256,
@@ -1132,34 +1147,84 @@ struct flashchip flashchips[] = { }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_49f002, .read = read_memmapped, },
- /* The next two chip definitions have top/bottom boot blocks, but has no
- device differenciation between the two */
We might want to add FEATURE_HAS_EVIL_TWIN or somesuch to .feature_bits to mark these chips. Not sure. If anything, it is material for later patches.
{ .vendor = "AMIC",
.name = "A25L40P",
.bustype = CHIP_BUSTYPE_SPI, .manufacture_id = AMIC_ID, .model_id = AMIC_A25L40P, .total_size = 512, .page_size = 256,.name = "A25L40PT",
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO,.tested = TEST_OK_PRW,
.erase = spi_chip_erase_c7,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 7},
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "AMIC",
.name = "A25L40PU",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = AMIC_ID,
.model_id = AMIC_A25L40P,
.total_size = 512,
.page_size = 256,
.tested = TEST_OK_PRW,
.probe = probe_spi_rdid4,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
{64 * 1024, 7},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.write = spi_chip_write_256, .read = spi_chip_read, },
{ .vendor = "AMIC", .name = "A29002B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A29002B, .total_size = 256,
@@ -1244,314 +1309,844 @@ struct flashchip flashchips[] = { .read = read_memmapped, },
{ .vendor = "AMIC", .name = "A49LF040A", .bustype = CHIP_BUSTYPE_LPC, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A49LF040A, .total_size = 512, .page_size = 64 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_49fl00x,
.feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_OK_PRW,
.probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */.probe = probe_jedec,
.erase = erase_49fl00x,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_eraser = erase_block_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_eraser = erase_chip_block_jedec,
}
},
.write = write_49fl00x, .read = read_memmapped, },
{ .vendor = "EMST", .name = "F49B002UA", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = EMST_ID, .model_id = EMST_F49B002UA, .total_size = 256, .page_size = 4096, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.erase = erase_chip_jedec,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{128 * 1024, 1},
{96 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_eraser = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_eraser = erase_chip_block_jedec,
}
},
.write = write_49f002, .read = read_memmapped, },
{ .vendor = "Eon", .name = "EN25B05", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B05, .total_size = 64, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.write = spi_chip_write_256,
.read = spi_chip_read,
- },
- {
.vendor = "Eon",
.name = "EN25B05T",
EN20B05 and EN25B05T are actually not 100% evil twins. If you run probe_spi_rems in addition to probe_spi_rdid, you can differentiate the two. Maybe add that info as comment. I can do that myself, tough. No reason to hold back your patch.
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25B05,
.total_size = 64,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.write = spi_chip_write_256, .read = spi_chip_read, },
{ .vendor = "Eon", .name = "EN25B10", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B10, .total_size = 128, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 3},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.write = spi_chip_write_256,
.read = spi_chip_read,
- },
- {
.vendor = "Eon",
.name = "EN25B10T",
Same comment as for EN25B05.
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25B10,
.total_size = 128,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{32 * 1024, 3},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.write = spi_chip_write_256, .read = spi_chip_read, },
{ .vendor = "Eon", .name = "EN25B20", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B20, .total_size = 256, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
{64 * 1024, 3}
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.write = spi_chip_write_256,
.read = spi_chip_read,
- },
- {
.vendor = "Eon",
.name = "EN25B20T",
Ditto.
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25B20,
.total_size = 256,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 3},
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.write = spi_chip_write_256, .read = spi_chip_read, },
{ .vendor = "Eon", .name = "EN25B40", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B40, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
{64 * 1024, 7}
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.write = spi_chip_write_256,
.read = spi_chip_read,
- },
- {
.vendor = "Eon",
.name = "EN25B40T",
Ditto.
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25B40,
.total_size = 512,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 7}
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.write = spi_chip_write_256, .read = spi_chip_read, },
{ .vendor = "Eon", .name = "EN25B80", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B80, .total_size = 1024, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
{64 * 1024, 15}
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.write = spi_chip_write_256,
.read = spi_chip_read,
- },
- {
.vendor = "Eon",
.name = "EN25B80T",
Ditto.
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25B80,
.total_size = 1024,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 15}
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.write = spi_chip_write_256, .read = spi_chip_read, },
{ .vendor = "Eon", .name = "EN25B16", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B16, .total_size = 2048, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
{64 * 1024, 31}
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.write = spi_chip_write_256,
.read = spi_chip_read,
- },
- {
.vendor = "Eon",
.name = "EN25B16T",
Ditto.
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25B16,
.total_size = 2048,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 31}
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.write = spi_chip_write_256, .read = spi_chip_read, },
{ .vendor = "Eon", .name = "EN25B32", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B32, .total_size = 4096, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
{64 * 1024, 63}
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.write = spi_chip_write_256,
.read = spi_chip_read,
- },
- {
.vendor = "Eon",
.name = "EN25B32T",
Ditto.
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25B32,
.total_size = 4096,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 63}
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.write = spi_chip_write_256, .read = spi_chip_read, },
{ .vendor = "Eon", .name = "EN25B64", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25B64, .total_size = 8192, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
{64 * 1024, 127}
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.write = spi_chip_write_256,
.read = spi_chip_read,
- },
- {
.vendor = "Eon",
.name = "EN25B64T",
Ditto.
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25B64,
.total_size = 8192,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 127}
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.write = spi_chip_write_256, .read = spi_chip_read, },
{ .vendor = "Eon", .name = "EN25D16", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25D16, .total_size = 2048, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_eraser = spi_block_eraser_20,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_eraser = spi_block_eraser_d8,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_eraser = spi_block_eraser_52,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_eraser = spi_block_eraser_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_eraser = spi_block_eraser_c7,
}
},
.write = spi_chip_write_256, .read = spi_chip_read, },
{ .vendor = "Eon", .name = "EN25F05", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25F05, .total_size = 64, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 16} },
.block_eraser = spi_block_eraser_20,
}, {
.eraseblocks = { {32 * 1024, 2} },
.block_eraser = spi_block_eraser_d8,
}, {
.eraseblocks = { {32 * 1024, 2} },
.block_eraser = spi_block_eraser_52,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_eraser = spi_block_eraser_60,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_eraser = spi_block_eraser_c7,
}
},
.write = spi_chip_write_256, .read = spi_chip_read, },
{ .vendor = "Eon", .name = "EN25F10", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25F10, .total_size = 128, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 32} },
.block_eraser = spi_block_eraser_20,
}, {
.eraseblocks = { {32 * 1024, 4} },
.block_eraser = spi_block_eraser_d8,
}, {
.eraseblocks = { {32 * 1024, 4} },
.block_eraser = spi_block_eraser_52,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_eraser = spi_block_eraser_60,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_eraser = spi_block_eraser_c7,
}
},
.write = spi_chip_write_256, .read = spi_chip_read, },
{ .vendor = "Eon", .name = "EN25F20", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25F20, .total_size = 256, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_eraser = spi_block_eraser_20,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_eraser = spi_block_eraser_d8,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_eraser = spi_block_eraser_52,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_eraser = spi_block_eraser_60,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_eraser = spi_block_eraser_c7,
}
},
.write = spi_chip_write_256, .read = spi_chip_read, },
{ .vendor = "Eon", .name = "EN25F40", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25F40, .total_size = 512, .page_size = 256, .tested = TEST_OK_PROBE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .erase = NULL, .block_erasers = { {
.eraseblocks = { {4 * 1024, 2048} },
.eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, {
.eraseblocks = { {4 * 1024, 2048} },
.eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.eraseblocks = { {512 * 1024, 1} },
Oops.
.block_erase = spi_block_erase_c7, }, }, .write = spi_chip_write_256, .read = spi_chip_read,
},
{ .vendor = "Eon", .name = "EN25F80", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25F80, .total_size = 1024, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_eraser = spi_block_eraser_20,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_eraser = spi_block_eraser_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_eraser = spi_block_eraser_60,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_eraser = spi_block_eraser_c7,
}
},
.write = spi_chip_write_256, .read = spi_chip_read, },
{ .vendor = "Eon", .name = "EN25F16", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25F16, .total_size = 2048, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_eraser = spi_block_eraser_20,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_eraser = spi_block_eraser_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_eraser = spi_block_eraser_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_eraser = spi_block_eraser_c7,
}
},
.write = spi_chip_write_256, .read = spi_chip_read, },
{ .vendor = "Eon", .name = "EN25F32", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EN_25F32, .total_size = 4096, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_eraser = spi_block_eraser_20,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_eraser = spi_block_eraser_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_eraser = spi_block_eraser_60,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_eraser = spi_block_eraser_c7,
}
},
.write = spi_chip_write_256, .read = spi_chip_read, },
{ .vendor = "EON", .name = "EN29F002(A)(N)B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = EON_ID, .model_id = EN_29F002B, .total_size = 256,
@@ -1734,74 +2329,110 @@ struct flashchip flashchips[] = { .read = read_memmapped, },
{ .vendor = "Intel", .name = "28F001BX-B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = INTEL_ID, .model_id = P28F001BXB, .total_size = 128, .page_size = 128 * 1024, /* 8k + 2x4k + 112k */
.tested = TEST_BAD_ERASE|TEST_BAD_WRITE,
.tested = TEST_BAD_WRITE,
Yay!
.probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{8 * 1024, 1},
{4 * 1024, 2},
{112 * 1024, 1},
},
.block_erase = erase_82802ab,
},
},
.write = NULL, .read = read_memmapped, },
{ .vendor = "Intel", .name = "28F001BX-T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = INTEL_ID, .model_id = P28F001BXT, .total_size = 128, .page_size = 128 * 1024, /* 112k + 2x4k + 8k */
Ugh. Not your comment, but WTF?!? page_size must DIE!
.tested = TEST_OK_PR|TEST_BAD_ERASE|TEST_BAD_WRITE,
.tested = TEST_OK_PR|TEST_BAD_WRITE,
Heh. Indeed. We should dig up who tested this and have him/her retest the chips.
.probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{112 * 1024, 1},
{4 * 1024, 2},
{8 * 1024, 1},
},
.block_erase = erase_82802ab,
},
},
.write = NULL, .read = read_memmapped, },
{ .vendor = "Intel", .name = "82802AB", .bustype = CHIP_BUSTYPE_FWH, .manufacture_id = INTEL_ID, .model_id = I_82802AB, .total_size = 512, .page_size = 64 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */.tested = TEST_OK_PRW,
.erase = erase_82802ab,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_82802ab,
},
},
.write = write_82802ab, .read = read_memmapped, },
{ .vendor = "Intel", .name = "82802AC", .bustype = CHIP_BUSTYPE_FWH, .manufacture_id = INTEL_ID, .model_id = I_82802AC, .total_size = 1024, .page_size = 64 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */.tested = TEST_OK_PRW,
.erase = erase_82802ab,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 16} },
.block_erase = erase_82802ab,
},
},
.write = write_82802ab, .read = read_memmapped, },
{ .vendor = "Macronix", .name = "MX25L512", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = MX_ID, .model_id = MX_25L512, .total_size = 64,
@@ -2008,23 +2639,39 @@ struct flashchip flashchips[] = { { .vendor = "Macronix", .name = "MX25L1635D", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = MX_ID, .model_id = MX_25L1635D, .total_size = 2048, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.write = spi_chip_write_256, .read = spi_chip_read, },
{ .vendor = "Macronix", .name = "MX25L3205", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = MX_ID, .model_id = MX_25L3205, .total_size = 4096,
@@ -2056,87 +2703,167 @@ struct flashchip flashchips[] = { { .vendor = "Macronix", .name = "MX25L3235D", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = MX_ID, .model_id = MX_25L3235D, .total_size = 4096, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.write = spi_chip_write_256, .read = spi_chip_read, },
{ .vendor = "Macronix", .name = "MX25L6405", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = MX_ID, .model_id = MX_25L6405, .total_size = 8192, .page_size = 256, .tested = TEST_OK_PROBE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.write = spi_chip_write_256, .read = spi_chip_read, },
{ .vendor = "Macronix", .name = "MX25L12805", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = MX_ID, .model_id = MX_25L12805, .total_size = 16384, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 4096} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 256} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.write = spi_chip_write_256, .read = spi_chip_read, },
{ .vendor = "Macronix", .name = "MX29F001B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = MX_ID, .model_id = MX_29F001B, .total_size = 128, .page_size = 32 * 1024,
.tested = TEST_OK_PRE,
.probe = probe_29f002, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */.tested = TEST_OK_PR,
.erase = erase_29f002,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{8 * 1024, 1},
{4 * 1024, 2},
{8 * 1024, 2},
{32 * 1024, 1},
{64 * 1024, 1},
},
.block_erase = eraser_sector_29f002,
Typo? eraseR looks strange.
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_29f002,
}
},
.write = write_jedec_1, .read = read_memmapped, },
{ .vendor = "Macronix", .name = "MX29F001T", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = MX_ID, .model_id = MX_29F001T, .total_size = 128, .page_size = 32 * 1024,
.tested = TEST_OK_PRE,
.probe = probe_29f002, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */.tested = TEST_OK_PR,
.erase = erase_29f002,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 1},
{32 * 1024, 1},
{8 * 1024, 2},
{4 * 1024, 2},
{8 * 1024, 1},
},
.block_erase = eraser_sector_29f002,
Typo? eraseR looks strange.
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_29f002,
}
},
.write = write_jedec_1, .read = read_memmapped, },
{ .vendor = "Macronix", .name = "MX29F002B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = MX_ID, .model_id = MX_29F002B, .total_size = 256,
@@ -2198,23 +2925,33 @@ struct flashchip flashchips[] = { { .vendor = "Macronix", .name = "MX29LV040", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = MX_ID, .model_id = MX_29LV040, .total_size = 512, .page_size = 64 * 1024, .tested = TEST_OK_PR, .probe = probe_29f002, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */
.erase = erase_29f002,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8}, },
.block_erase = erase_sector_29f002, /* This erase function has 64k blocksize for eLiteFlash */
Does that thing really also exist as eLiteFlash?
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_29f002,
},
},
.write = write_jedec_1, .read = read_memmapped, },
{ .vendor = "Numonyx", .name = "M25PE10", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = ST_ID, .model_id = ST_M25PE10, .total_size = 128,
diff --git a/flashchips.h b/flashchips.h index 684b8b9..19ff745 100644 --- a/flashchips.h +++ b/flashchips.h @@ -156,29 +156,45 @@
- EN25 chips are SPI, first byte of device ID is memory type,
- second byte of device ID is log(bitsize)-9.
- Vendor and device ID of EN29 series are both prefixed with 0x7F, which
- is the continuation code for IDs in bank 2.
- Vendor ID of EN25 series is NOT prefixed with 0x7F, this results in
- a collision with Mitsubishi. Mitsubishi once manufactured flash chips.
- Let's hope they are not manufacturing SPI flash chips as well.
*/ #define EON_ID 0x7F1C /* EON Silicon Devices */ #define EON_ID_NOPREFIX 0x1C /* EON, missing 0x7F prefix */ #define EN_25B05 0x2010 /* Same as P05, 2^19 kbit or 2^16 kByte */ +#define EN_25B05T 0x25 +#define EN_25B05B 0x95 #define EN_25B10 0x2011 /* Same as P10 */ +#define EN_25B10T 0x40 +#define EN_25B10B 0x30 #define EN_25B20 0x2012 /* Same as P20 */ +#define EN_25B20T 0x41 +#define EN_25B20B 0x31 #define EN_25B40 0x2013 /* Same as P40 */ +#define EN_25B40T 0x42 +#define EN_25B40B 0x32 #define EN_25B80 0x2014 /* Same as P80 */ +#define EN_25B80T 0x43 +#define EN_25B80B 0x33 #define EN_25B16 0x2015 /* Same as P16 */ +#define EN_25B16T 0x44 +#define EN_25B16B 0x34 #define EN_25B32 0x2016 /* Same as P32 */ +#define EN_25B32T 0x45 +#define EN_25B32B 0x35 #define EN_25B64 0x2017 /* Same as P64 */ +#define EN_25B64T 0x46 +#define EN_25B64B 0x36
Very nice. I'll create a probe function which can use the amended IDs.
#define EN_25D16 0x3015 #define EN_25F05 0x3110 #define EN_25F10 0x3111 #define EN_25F20 0x3112 #define EN_25F40 0x3113 #define EN_25F80 0x3114 #define EN_25F16 0x3115 #define EN_25F32 0x3116 #define EN_29F512 0x7F21 #define EN_29F010 0x7F20 #define EN_29F040A 0x7F04 diff --git a/jedec.c b/jedec.c index e1bd12f..3a21539 100644 --- a/jedec.c +++ b/jedec.c @@ -181,29 +181,29 @@ int probe_jedec_common(struct flashchip *flash, if (flashcontent2 == 0x7F) { flashcontent2 <<= 8; flashcontent2 |= chip_readb(bios + 0x101); }
if (largeid1 == flashcontent1) printf_debug(", id1 is normal flash content"); if (largeid2 == flashcontent2) printf_debug(", id2 is normal flash content");
printf_debug("\n");
- if (largeid1 == flash->manufacture_id && largeid2 == flash->model_id)
return 1;
if (largeid1 != flash->manufacture_id || largeid2 != flash->model_id)
return 0;
if (flash->feature_bits & FEATURE_REGISTERMAP) map_flash_registers(flash);
- return 0;
- return 1;
}
int erase_sector_jedec_common(struct flashchip *flash, unsigned int page, unsigned int pagesize, unsigned int mask) { chipaddr bios = flash->virtual_memory;
/* Issue the Sector Erase command */ chip_writeb(0xAA, bios + (0x5555 & mask)); programmer_delay(10); chip_writeb(0x55, bios + (0x2AAA & mask));
I noticed the possible eraseR_block_foo typo in a few places.
I'll commit my patch, and it would be great if you could regenerate yours on top (and please test compilation).
Regards, Carl-Daniel
Convert chips to block_erasers: ASD AE49F2008 AMIC A25L40P(T/U) AMIC A49LF040A EMST F49B002UA Eon EN25B05 Eon EN25B10 Eon EN25B20 Eon EN25B40 Eon EN25B80 Eon EN25B16 Eon EN25B32 Eon EN25B64 Eon EN25D16 Eon EN25F05 Eon EN25F10 Eon EN25F20 Eon EN25F40 Eon EN25F80 Eon EN25F16 Eon EN25F32 Intel 28F001BX-B Intel 28F001BX-T Intel 82802AB Intel 82802AC Macronix MX25L1635D Macronix MX25L3235D Macronix MX25L6405 Macronix MX25L12805 Macronix MX29F001B Macronix MX29F001T Macronix MX29LV040
Added new chips (according to datasheets): Eon EN25B05T Eon EN25B10T Eon EN25B20T Eon EN25B40T Eon EN25B80T Eon EN25B16T Eon EN25B32T Eon EN25B64T
Added minor Device IDs for Eon EN25Bxx{T,B} chips. Updated against r841.
Signed-off-by: Sean Nelson audiohacked@gmail.com
On 09.01.2010 04:51, Sean Nelson wrote:
Convert chips to block_erasers: ASD AE49F2008 AMIC A25L40P(T/U) AMIC A49LF040A EMST F49B002UA Eon EN25B05 Eon EN25B10 Eon EN25B20 Eon EN25B40 Eon EN25B80 Eon EN25B16 Eon EN25B32 Eon EN25B64 Eon EN25D16 Eon EN25F05 Eon EN25F10 Eon EN25F20 Eon EN25F40 Eon EN25F80 Eon EN25F16 Eon EN25F32 Intel 28F001BX-B Intel 28F001BX-T Intel 82802AB Intel 82802AC Macronix MX25L1635D Macronix MX25L3235D Macronix MX25L6405 Macronix MX25L12805 Macronix MX29F001B Macronix MX29F001T Macronix MX29LV040
Added new chips (according to datasheets): Eon EN25B05T Eon EN25B10T Eon EN25B20T Eon EN25B40T Eon EN25B80T Eon EN25B16T Eon EN25B32T Eon EN25B64T
Added minor Device IDs for Eon EN25Bxx{T,B} chips. Updated against r841.
Signed-off-by: Sean Nelson audiohacked@gmail.com
Does not compile for me: - 82802ab.c complaints about incorrect number of parameters - flashchips.c ".block_eraser =" instead of ".block_erase =" in a few places EN25B40T, EN25B80T, EN25B16T, EN25B32T, EN25B64T are missing a comma at the end of the first eraseblock Replace spi_block_eraser_ with spi_block_erase_ everywhere
Somehow your compile tests must have missed this.
Regards, Carl-Daniel
This should compile now, also diff'ed against r842.
On 09.01.2010 05:56, Sean Nelson wrote:
This should compile now, also diff'ed against r842.
Please reply with your signoff (so we have the full audit log in patchwork).
Acked-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Thank you for tackling this huge task.
Regards, Carl-Daniel
Convert chips to block_erasers: ASD AE49F2008 AMIC A25L40P(T/U) AMIC A49LF040A EMST F49B002UA Eon EN25B05 Eon EN25B10 Eon EN25B20 Eon EN25B40 Eon EN25B80 Eon EN25B16 Eon EN25B32 Eon EN25B64 Eon EN25D16 Eon EN25F05 Eon EN25F10 Eon EN25F20 Eon EN25F40 Eon EN25F80 Eon EN25F16 Eon EN25F32 Intel 28F001BX-B Intel 28F001BX-T Intel 82802AB Intel 82802AC Macronix MX25L1635D Macronix MX25L3235D Macronix MX25L6405 Macronix MX25L12805 Macronix MX29F001B Macronix MX29F001T Macronix MX29LV040
Added new chips (according to datasheets): Eon EN25B05T Eon EN25B10T Eon EN25B20T Eon EN25B40T Eon EN25B80T Eon EN25B16T Eon EN25B32T Eon EN25B64T
Added minor Device IDs for Eon EN25Bxx{T,B} chips.
Signed-off-by: Sean Nelson audiohacked@gmail.com