Author: uwe Date: Wed May 26 01:27:44 2010 New Revision: 1012 URL: http://flashrom.org/trac/coreboot/changeset/1012
Log: Mark the following chips as OK:
- PMC Pm49FL004 - SST SST49LF020 - SST SST49LF020A - SST SST49LF040B - SST SST49LF080A - Winbond W39V040B
I tested all operations on hardware using r997. Only on SST49LF040B write/erase does not seem to work, will investigate later (probe/read works, though).
Signed-off-by: Uwe Hermann uwe@hermann-uwe.de Acked-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Modified: trunk/flashchips.c
Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Mon May 24 19:39:14 2010 (r1011) +++ trunk/flashchips.c Wed May 26 01:27:44 2010 (r1012) @@ -3557,7 +3557,7 @@ .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ .block_erasers = @@ -4470,7 +4470,7 @@ .total_size = 256, .page_size = 16 * 1024, .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = @@ -4499,7 +4499,7 @@ .total_size = 256, .page_size = 4 * 1024, .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = @@ -4557,7 +4557,7 @@ .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PR, .probe = probe_jedec, .probe_timing = 1, /* 150ns */ .block_erasers = @@ -4586,7 +4586,7 @@ .total_size = 1024, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_FIXME, .block_erasers = @@ -6034,7 +6034,7 @@ .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PRW, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers =