Author: stefanct Date: Sat Oct 22 23:45:27 2011 New Revision: 1456 URL: http://flashrom.org/trac/flashrom/changeset/1456
Log: serprog: small improvements
- rename serprog_delay parameter to usecs - fix code style, (output) formatting issues and comments - sp_docommand: remove unnecessary malloc+memcpy and fix formatting
Signed-off-by: Stefan Tauner stefan.tauner@student.tuwien.ac.at Acked-by: Uwe Hermann uwe@hermann-uwe.de
Modified: trunk/programmer.h trunk/serprog-protocol.txt trunk/serprog.c
Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Fri Oct 21 15:20:11 2011 (r1455) +++ trunk/programmer.h Sat Oct 22 23:45:27 2011 (r1456) @@ -607,9 +607,10 @@ void serprog_chip_writeb(uint8_t val, chipaddr addr); uint8_t serprog_chip_readb(const chipaddr addr); void serprog_chip_readn(uint8_t *buf, const chipaddr addr, size_t len); -void serprog_delay(int delay); +void serprog_delay(int usecs); int serprog_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr); + const unsigned char *writearr, + unsigned char *readarr); int serprog_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len); #endif
Modified: trunk/serprog-protocol.txt ============================================================================== --- trunk/serprog-protocol.txt Fri Oct 21 15:20:11 2011 (r1455) +++ trunk/serprog-protocol.txt Sat Oct 22 23:45:27 2011 (r1456) @@ -19,7 +19,7 @@ 0x05 Query supported bustypes none ACK + 8-bit flags (as per flashrom) / NAK 0x06 Query connected address lines none ACK + 8bit line count / NAK 0x07 Query operation buffer size none ACK + 16bit size / NAK -0x08 Query write-n maximum data len none ACK + 24bit maximum length / NAK +0x08 Query maximum write-n length none ACK + 24bit length (0==2^24) / NAK 0x09 Read byte 24-bit addr ACK + BYTE / NAK 0x0A Read n bytes 24-bit addr + 24-bit length ACK + length bytes / NAK 0x0B Initialize operation buffer none ACK / NAK
Modified: trunk/serprog.c ============================================================================== --- trunk/serprog.c Fri Oct 21 15:20:11 2011 (r1455) +++ trunk/serprog.c Sat Oct 22 23:45:27 2011 (r1456) @@ -38,7 +38,7 @@ #include "programmer.h" #include "chipdrivers.h"
-#define MSGHEADER "serprog:" +#define MSGHEADER "serprog: "
/* * FIXME: This prototype was added to help reduce diffs for the shutdown @@ -204,7 +204,7 @@ return; } } - msg_perr("Error: cannot synchronize protocol\n" + msg_perr("Error: cannot synchronize protocol " "- check communications and reset device?\n"); exit(1); } @@ -220,32 +220,27 @@ static int sp_automatic_cmdcheck(uint8_t cmd) { if ((sp_check_avail_automatic) && (sp_check_commandavail(cmd) == 0)) { - msg_pdbg("Warning: Automatic command availability check" - " failed for cmd %d - wont execute cmd\n",cmd); + msg_pdbg("Warning: Automatic command availability check failed " + "for cmd 0x%x - won't execute cmd\n", cmd); return 1; } return 0; }
static int sp_docommand(uint8_t command, uint32_t parmlen, - uint8_t * params, uint32_t retlen, void *retparms) + uint8_t *params, uint32_t retlen, void *retparms) { - unsigned char *sendpacket; unsigned char c; if (sp_automatic_cmdcheck(command)) return 1; - sendpacket = malloc(1 + parmlen); - if (!sendpacket) - sp_die("Error: cannot malloc command buffer"); - sendpacket[0] = command; - memcpy(&(sendpacket[1]), params, parmlen); - if (write(sp_fd, sendpacket, 1 + parmlen) != (1 + parmlen)) { - sp_die("Error: cannot write command"); - } - free(sendpacket); + if (write(sp_fd, &command, 1) != 1) + sp_die("Error: cannot write op code"); + if (write(sp_fd, params, parmlen) != (parmlen)) + sp_die("Error: cannot write parameters"); if (read(sp_fd, &c, 1) != 1) sp_die("Error: cannot read from device"); - if (c == S_NAK) return 1; + if (c == S_NAK) + return 1; if (c != S_ACK) { msg_perr("Error: invalid response 0x%02X from device\n",c); exit(1); @@ -256,8 +251,8 @@ int r; r = read(sp_fd, retparms + rd_bytes, retlen - rd_bytes); - if (r <= 0) sp_die - ("Error: cannot read return parameters"); + if (r <= 0) + sp_die("Error: cannot read return parameters"); rd_bytes += r; } while (rd_bytes != retlen); } @@ -404,12 +399,12 @@ msg_pdbg(MSGHEADER "Synchronized\n");
if (sp_docommand(S_CMD_Q_IFACE, 0, NULL, 2, &iface)) { - msg_perr("Error: NAK to Query Interface version\n"); + msg_perr("Error: NAK to query interface version\n"); exit(1); }
if (iface != 1) { - msg_perr("Error: Unknown interface version %d\n", iface); + msg_perr("Error: Unknown interface version: %d\n", iface); exit(1); }
@@ -428,6 +423,11 @@ c = BUS_NONSPI; /* A reasonable default for now. */ } buses_supported = c; + msg_pdbg(MSGHEADER "Bus support: parallel=%s, LPC=%s, FWH=%s, SPI=%s\n", + (c & BUS_PARALLEL) ? "on" : "off", + (c & BUS_LPC) ? "on" : "off", + (c & BUS_FWH) ? "on" : "off", + (c & BUS_SPI) ? "on" : "off"); /* Check for the minimum operational set of commands. */ if (buses_supported & BUS_SPI) { uint8_t bt = BUS_SPI; @@ -538,12 +538,12 @@ strcpy((char *)pgmname, "(unknown)"); } pgmname[16] = 0; - msg_pinfo(MSGHEADER "Programmer name "%s"\n", pgmname); + msg_pinfo(MSGHEADER "Programmer name is "%s"\n", pgmname);
if (sp_docommand(S_CMD_Q_SERBUF, 0, NULL, 2, &sp_device_serbuf_size)) { msg_perr("Warning: NAK to query serial buffer size\n"); } - msg_pdbg(MSGHEADER "serial buffer size %d\n", + msg_pdbg(MSGHEADER "Serial buffer size is %d\n", sp_device_serbuf_size);
if (sp_check_commandavail(S_CMD_O_INIT)) { @@ -564,7 +564,7 @@ msg_perr("Warning: NAK to query operation buffer " "size\n"); } - msg_pdbg(MSGHEADER "operation buffer size %d\n", + msg_pdbg(MSGHEADER "operation buffer size is %d\n", sp_device_opbuf_size); }
@@ -581,7 +581,7 @@ { unsigned char header[7]; msg_pspew(MSGHEADER "Passing write-n bytes=%d addr=0x%x\n", - sp_write_n_bytes, sp_write_n_addr); + sp_write_n_bytes, sp_write_n_addr); if (sp_streamed_transmit_bytes >= (7 + sp_write_n_bytes + sp_device_serbuf_size)) sp_flush_stream(); @@ -735,31 +735,32 @@ { size_t lenm = len; chipaddr addrm = addr; - while ((sp_max_read_n)&&(lenm > sp_max_read_n)) { - sp_do_read_n(&(buf[addrm-addr]),addrm,sp_max_read_n); + while ((sp_max_read_n != 0) && (lenm > sp_max_read_n)) { + sp_do_read_n(&(buf[addrm-addr]), addrm, sp_max_read_n); addrm += sp_max_read_n; lenm -= sp_max_read_n; } - if (lenm) sp_do_read_n(&(buf[addrm-addr]),addrm,lenm); + if (lenm) + sp_do_read_n(&(buf[addrm-addr]), addrm, lenm); }
-void serprog_delay(int delay) +void serprog_delay(int usecs) { unsigned char buf[4]; - msg_pspew("%s\n", __func__); + msg_pspew("%s usecs=%d\n", __func__, usecs); if (!sp_check_commandavail(S_CMD_O_DELAY)) { - internal_delay(delay); msg_pdbg("Note: serprog_delay used, but the programmer doesn't " "support delay\n"); + internal_delay(usecs); return; } if ((sp_max_write_n) && (sp_write_n_bytes)) sp_pass_writen(); sp_check_opbuf_usage(5); - buf[0] = ((delay >> 0) & 0xFF); - buf[1] = ((delay >> 8) & 0xFF); - buf[2] = ((delay >> 16) & 0xFF); - buf[3] = ((delay >> 24) & 0xFF); + buf[0] = ((usecs >> 0) & 0xFF); + buf[1] = ((usecs >> 8) & 0xFF); + buf[2] = ((usecs >> 16) & 0xFF); + buf[3] = ((usecs >> 24) & 0xFF); sp_stream_buffer_op(S_CMD_O_DELAY, 4, buf); sp_opbuf_usage += 5; sp_prev_was_write = 0;
-
repository service