Re: [flashrom] flashrom -V

[Stefan Tauner]

On Mon, 9 Jan 2012 22:40:53 +0100
Luc Chante  wrote:
> flashrom v0.9.4-r1455 on Linux 2.6.32-220.2.1.el6.centos.plus.x86_64 (x86_64), built with libpci 3.1.4, GCC 4.4.5 20110214 (Red Hat 4.4.5-6), little endian
> flashrom is free software, get the source code at http://www.flashrom.org
>
> Calibrating delay loop... OS timer resolution is 1 usecs, 2912M loops per second, 10 myus = 11 us, 100 myus = 101 us, 1000 myus = 1000 us, 10000 myus = 9986 us, 4 myus = 5 us, OK.
> Initializing internal programmer
> No coreboot table found.
> DMI string system-manufacturer: "System manufacturer"
> DMI string system-product-name: "System Product Name"
> DMI string system-version: "System Version"
> DMI string baseboard-manufacturer: "ASUSTeK Computer INC."
> DMI string baseboard-product-name: "P5N7A-VM"
> DMI string baseboard-version: "Rev 1.xx"
> DMI string chassis-type: "Desktop"
> Found chipset "NVIDIA MCP79" with PCI ID 10de:0aac. 
> This chipset is marked as untested. If you are using an up-to-date version
> of flashrom please email a report to [e-mail] including a
> verbose (-V) log. Thank you!
> Enabling flash write... This chipset is not really supported yet. Guesswork...
> ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0
> Flash bus type is SPI
> SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to [e-mail], thanks!
> Found SMBus device 10de:0aa2 at 00:03:2
> MCP SPI BAR is at 0xf9f80000
> SPI control is 0xc052, req=0, gnt=0
> Please send the output of "flashrom -V" to [e-mail] with
> your board name: flashrom -V as the subject to help us finish support for your
> chipset. Thanks.
> OK.
> This chipset supports the following protocols: SPI.
> […]
> Found Winbond flash chip "W25X80" (1024 kB, SPI).
> No operations were specified.

Hello Luc,

thanks for your report!
I have marked the chipset and mainboard as tested and will commit that
later together with other small changes.