(no subject)

[claude]

MSI P6NGM motherboard

claude@claude-MS-7366:~$ sudo flashrom -V
flashrom v0.9.5.2-r1517 on Linux 3.2.0-24-generic (x86_64), built with
libpci 3.1.8, GCC 4.6.3, little endian
flashrom is free software, get the source code at
http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 1 usecs, 1972M loops
per second, 10 myus = 10 us, 100 myus = 97 us, 1000 myus = 965 us, 10000
myus = 11415 us, 4 myus = 5 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "MSI"
DMI string system-product-name: "MS-7366"
DMI string system-version: "1.0"
DMI string baseboard-manufacturer: "MSI"
DMI string baseboard-product-name: "MS-7366"
DMI string baseboard-version: "1.0"
DMI string chassis-type: "Desktop"
Found chipset "NVIDIA MCP73" with PCI ID 10de:07d7. Enabling flash
write... This chipset is not really supported yet. Guesswork...
ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0
Flash bus type is LPC
Found SMBus device 10de:07d8 at 00:03:1
MCP SPI BAR is at 0xfeb80000
Strange. MCP SPI BAR is valid, but chipset apparently doesn't have SPI
enabled.
Please send the output of "flashrom -V" to [e-mail] with
your board name: flashrom -V as the subject to help us finish support
for your
chipset. Thanks.
OK.
The following protocols are supported: LPC.
Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xd7, id2 0x99,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xd7, id2
0x99, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xd7, id2
0x99, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xd7, id2
0x99, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xd7, id2
0x99, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found
automatically.
Restoring PCI config space for 00:03:0 reg 0x6d
Restoring PCI config space for 00:03:0 reg 0x90
Restoring PCI config space for 00:03:0 reg 0x8c
Restoring PCI config space for 00:03:0 reg 0x88
claude@claude-MS-7366:~$