(no subject)

[Djkds Jsjks]

sudo flashrom -VV [plus the -p/--programmer parameter]
flashrom 1.4.0 on Linux 6.6.54-current-sunxi64 (aarch64)
flashrom is free software, get the source code at https://flashrom.org

Error: Unknown programmer "/--programmer". Valid choices are:
internal, dummy, gfxnvidia, raiden_debug_spi, drkaiser, satasii, asm106x,
atavia, it8212, ft2232_spi, serprog, buspirate_spi, dediprog, developerbox,
pony_spi, nicintel, nicintel_spi, nicintel_eeprom, ogp_spi, linux_mtd,
linux_spi, usbblaster_spi, pickit2_spi, ch341a_spi, ch347_spi, digilent_spi,
jlink_spi, stlinkv3_spi, dirtyjtag_spi.
Please run "flashrom --help" for usage info.

[Stefan Reinauer]

The / implies that you choose either -p or the long form --programmer. So
if you want to program your local system's flash you would specify -p
internal or --programmer internal.

On Fri, Nov 15, 2024 at 10:38 PM Djkds Jsjks 
wrote:
> sudo flashrom -VV [plus the -p/--programmer parameter]
> flashrom 1.4.0 on Linux 6.6.54-current-sunxi64 (aarch64)
> flashrom is free software, get the source code at https://flashrom.org
>
> Error: Unknown programmer "/--programmer". Valid choices are:
> internal, dummy, gfxnvidia, raiden_debug_spi, drkaiser, satasii, asm106x,
> atavia, it8212, ft2232_spi, serprog, buspirate_spi, dediprog, developerbox,
> pony_spi, nicintel, nicintel_spi, nicintel_eeprom, ogp_spi, linux_mtd,
> linux_spi, usbblaster_spi, pickit2_spi, ch341a_spi, ch347_spi,
> digilent_spi,
> jlink_spi, stlinkv3_spi, dirtyjtag_spi.
> Please run "flashrom --help" for usage info.
> _______________________________________________
> flashrom mailing list -- [e-mail]
> To unsubscribe send an email to [e-mail]