[PATCH] protection-free boards

[Stefan Reinauer]

Hi,

this patch makes flashrom "protection-free boards" friendly when
coreboot is running by making the board->enable() function optional in
the board structure.

Stefan

[Carl-Daniel Hailfinger]

On 25.07.2009 12:12, Stefan Reinauer wrote:
> this patch makes flashrom "protection-free boards" friendly when
> coreboot is running by making the board->enable() function optional in
> the board structure.
> Index: board_enable.c
>
> --- board_enable.c	(revision 667)
> +++ board_enable.c	(working copy)
> @@ -1186,8 +1186,8 @@
>    if (!board)
>    	board = board_match_pci_card_ids();
> if (board) {
> printf("Found board \"%s %s\", enabling flash write... ",
>
> if (board && board->enable) {
> printf("Disabling flash write protection for board \"%s %s\"... ",
>   board->vendor_name, board->board_name);
>
> ret = board->enable(board->vendor_name);

This means you have to add an empty board enable for every single board
supported by coreboot. It would be a lot better to check if we got the
board name from lbtable, then print a message "found board xy,
apparently no board specific write enable needed".
I'll send a patch.

Regards,
Carl-Daniel