Hi, I just flashed BIOS on this host using the flashrom tool in ubuntu lucid repository.. Next time I have to flash the BIOS I'll be sure to add -V options.. But this combo apparently worked, except for the 2 spi_block_erase commands that failed.
# flashrom -w JX58D210.BIN flashrom v0.9.1-r873 No coreboot table found. Found ITE SuperI/O, id 8718 Found chipset "Intel ICH10R", enabling flash write... OK. This chipset supports the following protocols: FWH,SPI. Calibrating delay loop... OK. Found chip "SST SST25VF080B" (1024 KB, SPI) at physical address 0xfff00000. === This flash part has status UNTESTED for operations: ERASE Please email a report to flashrom@flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash before programming... Erasing flash chip... spi_block_erase_20 failed during command execution at address 0x0 spi_block_erase_52 failed during command execution at address 0x0 SUCCESS. done. COMPLETE. Verifying flash... VERIFIED.
-
Mathew Hennessy