Re: [flashrom] [PATCH 1/2] Add IT8212F as programmer.

[Carl-Daniel Hailfinger]

Am 02.06.2014 00:43 schrieb Stefan Tauner:
> This PCI PATA controller can use 3V parallel flash up to 128 kB.
>
> My card was identified as:
>   PCI 1283:8212, subsystem 1283:0001.
>
> and labelled as:
>   Innovision Multimedia LTD.
>   EIO ATA133 RAID
>   (DM-8401 Ver A)
>
> This particular card did not require setting of any GPIO signals to
> enable flash writing. My card has Pm39LV512 in PLCC32 package without
> socket.
>
> Signed-off-by: Kyösti Mälkki 
> Signed-off-by: Stefan Tauner

Looks good, thanks for your patch!
Acked-by: Carl-Daniel Hailfinger

Regards,
Carl-Daniel

[PATCH 1/2] Add IT8212F as programmer.

[Stefan Tauner]

On Mon, 02 Jun 2014 01:02:58 +0200
Carl-Daniel Hailfinger  wrote:
> Am 02.06.2014 00:43 schrieb Stefan Tauner:
> > This PCI PATA controller can use 3V parallel flash up to 128 kB.
> >
> > My card was identified as:
> >   PCI 1283:8212, subsystem 1283:0001.
> >
> > and labelled as:
> >   Innovision Multimedia LTD.
> >   EIO ATA133 RAID
> >   (DM-8401 Ver A)
> >
> > This particular card did not require setting of any GPIO signals to
> > enable flash writing. My card has Pm39LV512 in PLCC32 package without
> > socket.
> >
> > Signed-off-by: Kyösti Mälkki 
> > Signed-off-by: Stefan Tauner
>
> Looks good, thanks for your patch!
> Acked-by: Carl-Daniel Hailfinger

Thanks, committed in r1812 but the commit message is a lie. :|