Re: [flashrom] FAILED : mcp61sm -am

[Vince S]

Hi so the output of my attempt to flash is

sudo flashrom -V -w '/home/vince/Téléchargements/BIOS_R01-C0/61AO615.BIN'

flashrom v0.9.4-r1394 on Linux 3.0.0-15-generic (x86_64), built with libpci
3.1.7, GCC 4.6.1, little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 1 usecs, 736M loops per
second, 10 myus = 11 us, 100 myus = 101 us, 1000 myus = 1007 us, 10000 myus
= 10003 us, 4 myus = 5 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "Acer"
DMI string system-product-name: "Aspire E380"
DMI string system-version: "R01-A2"
DMI string baseboard-manufacturer: "Acer"
DMI string baseboard-product-name: "EM61SM/EM61PM         "
DMI string baseboard-version: " "
DMI string chassis-type: "Desktop"
Found ITE Super I/O, ID 0x8726 on port 0x2e
Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0.
This chipset is marked as untested. If you are using an up-to-date version
of flashrom please email a report to [e-mail] including a
verbose (-V) log. Thank you!
Enabling flash write... This chipset is not really supported yet.
Guesswork...
ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0
Flash bus type is LPC
Found SMBus device 10de:03eb at 00:01:1
MCP SPI BAR is at 0xfec80000
Strange. MCP SPI BAR is valid, but chipset apparently doesn't have SPI
enabled.
Please send the output of "flashrom -V" to [e-mail] with
your board name: flashrom -V as the subject to help us finish support for
your
chipset. Thanks.
OK.
This chipset supports the following protocols: LPC.
Super I/O ID 0x8726 is not on the list of flash capable controllers.
Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Found SST flash chip "SST49LF040B" (512 kB, LPC) at physical address
0xfff80000.
Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50
Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50
===
This flash part has status UNTESTED for operations: WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to [e-mail] if any of the above
operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-Vw, -VE), and mention which mainboard or programmer you tested.
Please mention your board in the subject line. Thanks for your help!
Flash image seems to be a legacy BIOS. Disabling coreboot-related checks.
Reading old flash chip contents... done.
Erasing and writing flash chip... Trying erase function 0...
0x000000-0x000fff:W, 0x001000-0x001fff:S, 0x002000-0x002fff:S,
0x003000-0x003fff:S, 0x004000-0x004fff:S, 0x005000-0x005fff:S,
0x006000-0x006fff:S, 0x007000-0x007fff:S, 0x008000-0x008fff:S,
0x009000-0x009fff:S, 0x00a000-0x00afff:S, 0x00b000-0x00bfff:S,
0x00c000-0x00cfff:S, 0x00d000-0x00dfff:S, 0x00e000-0x00efff:S,
0x00f000-0x00ffff:S, 0x010000-0x010fff:W, 0x011000-0x011fff:W,
0x012000-0x012fff:W, 0x013000-0x013fff:W, 0x014000-0x014fff:W,
0x015000-0x015fff:W, 0x016000-0x016fff:W, 0x017000-0x017fff:W,
0x018000-0x018fff:W, 0x019000-0x019fff:W, 0x01a000-0x01afff:W,
0x01b000-0x01bfff:W, 0x01c000-0x01cfff:W, 0x01d000-0x01dfff:W,
0x01e000-0x01efff:W, 0x01f000-0x01ffff:W, 0x020000-0x020fff:W,
0x021000-0x021fff:W, 0x022000-0x022fff:W, 0x023000-0x023fff:W,
0x024000-0x024fff:W, 0x025000-0x025fff:W, 0x026000-0x026fff:W,
0x027000-0x027fff:W, 0x028000-0x028fff:W, 0x029000-0x029fff:W,
0x02a000-0x02afff:W, 0x02b000-0x02bfff:W, 0x02c000-0x02cfff:W,
0x02d000-0x02dfff:W, 0x02e000-0x02efff:W, 0x02f000-0x02ffff:W,
0x030000-0x030fff:W, 0x031000-0x031fff:W, 0x032000-0x032fff:W,
0x033000-0x033fff:W, 0x034000-0x034fff:W, 0x035000-0x035fff:W,
0x036000-0x036fff:W, 0x037000-0x037fff:W, 0x038000-0x038fff:W,
0x039000-0x039fff:W, 0x03a000-0x03afff:W, 0x03b000-0x03bfff:W,
0x03c000-0x03cfff:W, 0x03d000-0x03dfff:W, 0x03e000-0x03efff:W,
0x03f000-0x03ffff:W, 0x040000-0x040fff:W, 0x041000-0x041fff:W,
0x042000-0x042fff:W, 0x043000-0x043fff:W, 0x044000-0x044fff:W,
0x045000-0x045fff:W, 0x046000-0x046fff:W, 0x047000-0x047fff:W,
0x048000-0x048fff:W, 0x049000-0x049fff:W, 0x04a000-0x04afff:W,
0x04b000-0x04bfff:W, 0x04c000-0x04cfff:W, 0x04d000-0x04dfff:W,
0x04e000-0x04efff:W, 0x04f000-0x04ffff:W, 0x050000-0x050fff:W,
0x051000-0x051fff:W, 0x052000-0x052fff:W, 0x053000-0x053fff:W,
0x054000-0x054fff:W, 0x055000-0x055fff:W, 0x056000-0x056fff:S,
0x057000-0x057fff:S, 0x058000-0x058fff:S, 0x059000-0x059fff:S,
0x05a000-0x05afff:S, 0x05b000-0x05bfff:S, 0x05c000-0x05cfff:S,
0x05d000-0x05dfff:S, 0x05e000-0x05efff:S, 0x05f000-0x05ffff:S,
0x060000-0x060fff:S, 0x061000-0x061fff:S, 0x062000-0x062fff:S,
0x063000-0x063fff:S, 0x064000-0x064fff:S, 0x065000-0x065fff:S,
0x066000-0x066fff:S, 0x067000-0x067fff:S, 0x068000-0x068fff:S,
0x069000-0x069fff:S, 0x06a000-0x06afff:W, 0x06b000-0x06bfff:W,
0x06c000-0x06cfff:W, 0x06d000-0x06dfff:W, 0x06e000-0x06efff:W,
0x06f000-0x06ffff:W, 0x070000-0x070fff:W writing sector at 0x7f28ed976000
failed!
Reading current flash chip contents... done. Looking for another erase
function.
Trying erase function 1... 0x000000-0x00ffff:S, 0x010000-0x01ffff:S,
0x020000-0x02ffff:S, 0x030000-0x03ffff:S, 0x040000-0x04ffff:S,
0x050000-0x05ffff:S, 0x060000-0x06ffff:S, 0x070000-0x07ffff:W writing
sector at 0x7f28ed976000 failed!
Looking for another erase function.
No usable erase functions left.
FAILED!
Uh oh. Erase/write failed. Checking if anything changed.
Your flash chip is in an unknown state.
Get help on IRC at irc.freenode.net (channel #flashrom) or
mail [e-mail] with FAILED: your board name in the subject line!
-------------------------------------------------------------------------------
DO NOT REBOOT OR POWEROFF!
Restoring PCI config space for 00:01:0 reg 0x6d
Restoring PCI config space for 00:01:0 reg 0x90
Restoring PCI config space for 00:01:0 reg 0x8c
Restoring PCI config space for 00:01:0 reg 0x88

what can i do??