# ./flashrom -p internal -r test.out flashrom v1.0.1 on Linux 4.4.0-142-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found chipset "Intel B150". This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom@flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... Warning: BIOS region SMM protection is enabled! Warning: Setting Bios Control at 0xdc from 0xaa to 0x89 failed. New value is 0xaa. Warning: SPI Configuration Lockdown activated. FREG0: Warning: Flash Descriptor region (0x00000000-0x00000fff) is read-only. FREG2: Warning: Management Engine region (0x00003000-0x007fffff) is locked. Not all flash regions are freely accessible by flashrom. This is most likely due to an active ME. Please see https://flashrom.org/ME for details. Writes have been disabled for safety reasons. You can enforce write support with the ich_spi_force programmer option, but you will most likely harm your hardware! If you force flashrom you will get no support if something breaks. On a few mainboards it is possible to enable write access by setting a jumper (see its documentation or the board itself). Enabling hardware sequencing because some important opcode is locked. PROBLEMS, continuing anyway Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific) mapped at physical address 0x0000000000000000. Reading flash... Transaction error between offset 0x00003000 and 0x0000303f (= 0x00003000 + 63)! Read operation failed! FAILED.
flashrom-v1.0.1 # ./flashrom -p internal -V -r test.out
flashrom v1.0.1 on Linux 4.4.0-142-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org
flashrom was built with libpci 3.2.1, GCC 4.8.4, little endian Command line (5 args): ./flashrom -p internal -V -r test.out Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing internal programmer No coreboot table found. Using Internal DMI decoder. DMI string chassis-type: "Desktop" DMI string system-manufacturer: "FUJITSU" DMI string system-product-name: " " DMI string system-version: " " DMI string baseboard-manufacturer: "FUJITSU" DMI string baseboard-product-name: "D3401-H2" DMI string baseboard-version: "S26361-D3401-H2 " Found chipset "Intel B150" with PCI ID 8086:a148. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom@flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... BIOS_SPI_BC = 0xaaa: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x0 (SPI) Top Swap: not enabled SPI Read Configuration: prefetching enabled, caching enabled, BIOS_CNTL = 0xaa: BIOS Lock Enable: enabled, BIOS Write Enable: disabled Warning: BIOS region SMM protection is enabled! Warning: Setting Bios Control at 0xdc from 0xaa to 0x89 failed. New value is 0xaa. SPIBAR = 0x00007fccfaa47000 (phys = 0xfe010000) 0x04: 0xe800 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, SCIP=0, PRR34_LOCKDN=0, WRSDIS=1, FDOPSS=1, FDV=1, FLOCKDN=1 Warning: SPI Configuration Lockdown activated. Reading OPCODES... done 0x06: 0x3f00 (HSFC) HSFC: FGO=0, HSFC=0, WET=0, FDBC=63, SME=0 0x0c: 0x00000000 (DLOCK) DLOCK: BMWAG_LOCKDN=0, BMRAG_LOCKDN=0, SBMWAG_LOCKDN=0, SBMRAG_LOCKDN=0, PR0_LOCKDN=0, PR1_LOCKDN=0, PR2_LOCKDN=0, PR3_LOCKDN=0, PR4_LOCKDN=0, SSEQ_LOCKDN=0 0x50: 0x00004acb (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x4a, BRRA 0xcb 0x54: 0x00000000 FREG0: Warning: Flash Descriptor region (0x00000000-0x00000fff) is read-only. 0x58: 0x0fff0800 FREG1: BIOS region (0x00800000-0x00ffffff) is read-write. 0x5C: 0x07ff0003 FREG2: Warning: Management Engine region (0x00003000-0x007fffff) is locked. 0x60: 0x00020001 FREG3: Gigabit Ethernet region (0x00001000-0x00002fff) is read-write. Not all flash regions are freely accessible by flashrom. This is most likely due to an active ME. Please see https://flashrom.org/ME for details. Writes have been disabled for safety reasons. You can enforce write support with the ich_spi_force programmer option, but you will most likely harm your hardware! If you force flashrom you will get no support if something breaks. On a few mainboards it is possible to enable write access by setting a jumper (see its documentation or the board itself). 0xa0: 0x80 (SSFS) SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0 0xa1: 0xfe0000 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=6 0xa4: 0x0000 (PREOP) 0xa6: 0x0000 (OPTYPE) 0xa8: 0x00000000 (OPMENU) 0xac: 0x00000000 (OPMENU+4) Enabling hardware sequencing because some important opcode is locked. PROBLEMS, continuing anyway The following protocols are supported: Parallel, LPC, FWH, Programmer-specific. Probing for Programmer Opaque flash chip, 0 kB: Hardware sequencing reports 1 attached SPI flash chip with a density of 16384 kB. Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific) mapped at physical address 0x0000000000000000. Probing for AMD Am29F010, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49(H)F010, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F040, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F080, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F080T, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH00B4, 512 kB: probe_82802ab: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH004, 512 kB: probe_82802ab: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for Catalyst CAT28F512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for ESMT F49B002UA, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29LV040(A), 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29LV640B, 8192 kB: probe_en29lv640b: id1 0x0000, id2 0x0000 Probing for Eon EN29GL064(A)B, 8192 kB: probe_jedec_29gl: man_id 0x00, dev_id 0x000000, man_id parity violation, man_id seems to be normal flash content, dev_id seems to be normal flash content Probing for Eon EN29GL064(A)T, 8192 kB: probe_jedec_29gl: man_id 0x00, dev_id 0x000000, man_id parity violation, man_id seems to be normal flash content, dev_id seems to be normal flash content Probing for Eon EN29GL064H/L, 8192 kB: probe_jedec_29gl: man_id 0x00, dev_id 0x000000, man_id parity violation, man_id seems to be normal flash content, dev_id seems to be normal flash content Probing for Eon EN29GL128, 16384 kB: probe_jedec_29gl: man_id 0xff, dev_id 0xffffff, man_id parity violation, man_id seems to be normal flash content, dev_id seems to be normal flash content Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 kB: probe_jedec_common: id1 0x45, id2 0x89, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400TC, 512 kB: probe_jedec_common: id1 0x45, id2 0x89, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29LV160BE, 2048 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29LV160TE, 2048 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0x45, id2 0x89, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0x45, id2 0x89, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ISSI IS29GL064B, 8192 kB: probe_jedec_29gl: man_id 0x00, dev_id 0x000000, man_id parity violation, man_id seems to be normal flash content, dev_id seems to be normal flash content Probing for ISSI IS29GL064T, 8192 kB: probe_jedec_29gl: man_id 0x00, dev_id 0x000000, man_id parity violation, man_id seems to be normal flash content, dev_id seems to be normal flash content Probing for ISSI IS29GL064H/L, 8192 kB: probe_jedec_29gl: man_id 0x00, dev_id 0x000000, man_id parity violation, man_id seems to be normal flash content, dev_id seems to be normal flash content Probing for ISSI IS29GL128H/L, 16384 kB: probe_jedec_29gl: man_id 0xff, dev_id 0xffffff, man_id parity violation, man_id seems to be normal flash content, dev_id seems to be normal flash content Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F022(N)B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F022(N)T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29GL320EB, 4096 kB: probe_jedec_29gl: man_id 0xff, dev_id 0xffffff, man_id parity violation, man_id seems to be normal flash content, dev_id seems to be normal flash content Probing for Macronix MX29GL320ET, 4096 kB: probe_jedec_29gl: man_id 0xff, dev_id 0xffffff, man_id parity violation, man_id seems to be normal flash content, dev_id seems to be normal flash content Probing for Macronix MX29GL320EH/L, 4096 kB: probe_jedec_29gl: man_id 0xff, dev_id 0xffffff, man_id parity violation, man_id seems to be normal flash content, dev_id seems to be normal flash content Probing for Macronix MX29GL640EB, 8192 kB: probe_jedec_29gl: man_id 0x00, dev_id 0x000000, man_id parity violation, man_id seems to be normal flash content, dev_id seems to be normal flash content Probing for Macronix MX29GL640ET, 8192 kB: probe_jedec_29gl: man_id 0x00, dev_id 0x000000, man_id parity violation, man_id seems to be normal flash content, dev_id seems to be normal flash content Probing for Macronix MX29GL640EH/L, 8192 kB: probe_jedec_29gl: man_id 0x00, dev_id 0x000000, man_id parity violation, man_id seems to be normal flash content, dev_id seems to be normal flash content Probing for Macronix MX29GL128F, 16384 kB: probe_jedec_29gl: man_id 0xff, dev_id 0xffffff, man_id parity violation, man_id seems to be normal flash content, dev_id seems to be normal flash content Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information, using default 10ms/40us. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing information, using default 10ms/40us. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for Sharp LH28F008BJT-BTLZ1, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10ms/40us. probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 kB: probe_jedec_common: id1 0x45, id2 0x89, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BT, 512 kB: probe_jedec_common: id1 0x45, id2 0x89, id1 is normal flash content, id2 is normal flash content Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW080, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C512A/W29EE512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012-old, 128 kB: Old Winbond W29* probe method disabled because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29C010(M)/W29C011A/W29EE011/W29EE012-old' if you have a board with such a chip. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29GL032CB, 4096 kB: probe_jedec_29gl: man_id 0xff, dev_id 0xffffff, man_id parity violation, man_id seems to be normal flash content, dev_id seems to be normal flash content Probing for Winbond W29GL032CT, 4096 kB: probe_jedec_29gl: man_id 0xff, dev_id 0xffffff, man_id parity violation, man_id seems to be normal flash content, dev_id seems to be normal flash content Probing for Winbond W29GL032CH/L, 4096 kB: probe_jedec_29gl: man_id 0xff, dev_id 0xffffff, man_id parity violation, man_id seems to be normal flash content, dev_id seems to be normal flash content Probing for Winbond W29GL064CB, 8192 kB: probe_jedec_29gl: man_id 0x00, dev_id 0x000000, man_id parity violation, man_id seems to be normal flash content, dev_id seems to be normal flash content Probing for Winbond W29GL064CT, 8192 kB: probe_jedec_29gl: man_id 0x00, dev_id 0x000000, man_id parity violation, man_id seems to be normal flash content, dev_id seems to be normal flash content Probing for Winbond W29GL064CH/L, 8192 kB: probe_jedec_29gl: man_id 0x00, dev_id 0x000000, man_id parity violation, man_id seems to be normal flash content, dev_id seems to be normal flash content Probing for Winbond W29GL128C, 16384 kB: probe_jedec_29gl: man_id 0xff, dev_id 0xffffff, man_id parity violation, man_id seems to be normal flash content, dev_id seems to be normal flash content Probing for Winbond W39F010, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39L010, 128 kB: probe_jedec_common: id1 0xeb, id2 0x2e, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39L020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x45, id2 0xf8, id1 is normal flash content, id2 is normal flash content Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific). Reading flash... Reading 16777216 bytes starting at 0x000000. Transaction error between offset 0x00003000 and 0x0000303f (= 0x00003000 + 63)! HSFS: FDONE=1, FCERR=1, AEL=0, SCIP=0, PRR34_LOCKDN=0, WRSDIS=1, FDOPSS=1, FDV=1, FLOCKDN=1 HSFC: FGO=0, HSFC=0, WET=0, FDBC=63, SME=0 Read operation failed! FAILED. Restoring PCI config space for 00:1f:5 reg 0xdc
-
X R