If flash chip is switched to 4-bytes addressing mode then all read/erase/program instructions will be switched from 3-bytes mode to 4-bytes mode. Then well known instructions like 03h (Read), 02h (Program) and 20h,52h,D8h (Erase) will become one byte longer and accept 4-bytes address instead of 3-bytes.
This patch provides support for well known instructions in 4-bytes addressing mode. Also here is the code to enter 4-bytes addressing mode by execute the instruction B7h (Enter 4-bytes mode).
Patched files ------------- chipdrivers.h + added functions declarations for spi4ba.c
flash.h + feature definitions added
Makefile + added spi4ba.c
Added files ----------- spi4ba.h + definitions for 4-bytes addressing JEDEC commands + functions declarations from spi4ba.c (same as in chipdrivers.h, just to see)
spi4ba.c + functions for enter 4-bytes addressing mode + functions for read/write/erase in 4-bytes addressing mode
Signed-off-by: Boris Baykov dev@borisbaykov.com, Russia, Jan 2014 --- diff -U 5 -N ./flashrom/chipdrivers.h ./flashrom-1868-4ba-1/chipdrivers.h --- ./flashrom/chipdrivers.h 2015-01-11 01:55:15.009871200 +0300 +++ ./flashrom-1868-4ba-1/chipdrivers.h 2015-01-10 15:27:25.000000000 +0300 @@ -192,6 +192,16 @@
/* en29lv640b.c */ int probe_en29lv640b(struct flashctx *flash); int write_en29lv640b(struct flashctx *flash, const uint8_t *buf, unsigned int start, unsigned int len);
+/* spi4ba.c */ +int spi_enter_4ba_b7(struct flashctx *flash); +int spi_enter_4ba_b7_we(struct flashctx *flash); +int spi_byte_program_4ba(struct flashctx *flash, unsigned int addr, uint8_t databyte); +int spi_nbyte_program_4ba(struct flashctx *flash, unsigned int addr, const uint8_t *bytes, unsigned int len); +int spi_nbyte_read_4ba(struct flashctx *flash, unsigned int addr, uint8_t *bytes, unsigned int len); +int spi_block_erase_20_4ba(struct flashctx *flash, unsigned int addr, unsigned int blocklen); +int spi_block_erase_52_4ba(struct flashctx *flash, unsigned int addr, unsigned int blocklen); +int spi_block_erase_d8_4ba(struct flashctx *flash, unsigned int addr, unsigned int blocklen); + #endif /* !__CHIPDRIVERS_H__ */ diff -U 5 -N ./flashrom/flash.h ./flashrom-1868-4ba-1/flash.h --- ./flashrom/flash.h 2015-01-11 01:55:15.020372600 +0300 +++ ./flashrom-1868-4ba-1/flash.h 2015-01-10 18:59:43.000000000 +0300 @@ -121,10 +121,13 @@ #define FEATURE_WRSR_EWSR (1 << 6) #define FEATURE_WRSR_WREN (1 << 7) #define FEATURE_WRSR_EITHER (FEATURE_WRSR_EWSR | FEATURE_WRSR_WREN) #define FEATURE_OTP (1 << 8) #define FEATURE_QPI (1 << 9) +/* Feature bits used for 4-bytes addressing mode */ +#define FEATURE_4BA_SUPPORT (1 << 10) +#define FEATURE_4BA_ONLY (1 << 11)
enum test_state { OK = 0, NT = 1, /* Not tested */ BAD, /* Known to not work */ diff -U 5 -N ./flashrom/Makefile ./flashrom-1868-4ba-1/Makefile --- ./flashrom/Makefile 2015-01-11 01:55:15.023873000 +0300 +++ ./flashrom-1868-4ba-1/Makefile 2015-01-10 14:34:40.000000000 +0300 @@ -355,11 +355,11 @@ # Flash chip drivers and bus support infrastructure.
CHIP_OBJS = jedec.o stm50.o w39.o w29ee011.o \ sst28sf040.o 82802ab.o \ sst49lfxxxc.o sst_fwhub.o flashchips.o spi.o spi25.o spi25_statusreg.o \ - opaque.o sfdp.o en29lv640b.o at45db.o + spi4ba.o opaque.o sfdp.o en29lv640b.o at45db.o
############################################################################### # Library code.
LIB_OBJS = layout.o flashrom.o udelay.o programmer.o helpers.o diff -U 5 -N ./flashrom/spi4ba.c ./flashrom-1868-4ba-1/spi4ba.c --- ./flashrom/spi4ba.c 1970-01-01 03:00:00.000000000 +0300 +++ ./flashrom-1868-4ba-1/spi4ba.c 2015-01-10 18:24:52.000000000 +0300 @@ -0,0 +1,327 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2014 Boris Baykov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * SPI chip driver functions for 4-bytes addressing + */ + +#include <string.h> +#include "flash.h" +#include "chipdrivers.h" +#include "spi.h" +#include "programmer.h" +#include "spi4ba.h" + +/* #define MSG_TRACE_4BA_FUNCS 1 */ + +#ifdef MSG_TRACE_4BA_FUNCS +#define msg_trace(...) print(MSG_DEBUG, __VA_ARGS__) +#else +#define msg_trace(...) +#endif + +/* Enter 4-bytes addressing mode (without sending WREN before) */ +int spi_enter_4ba_b7(struct flashctx *flash) +{ + const unsigned char cmd[JEDEC_ENTER_4_BYTE_ADDR_MODE_OUTSIZE] = { JEDEC_ENTER_4_BYTE_ADDR_MODE }; + + msg_trace("-> %s\n", __func__); + + /* Switch to 4-bytes addressing mode */ + return spi_send_command(flash, sizeof(cmd), 0, cmd, NULL); +} + +/* Enter 4-bytes addressing mode with sending WREN before */ +int spi_enter_4ba_b7_we(struct flashctx *flash) +{ + int result; + struct spi_command cmds[] = { + { + .writecnt = JEDEC_WREN_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_WREN }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = JEDEC_ENTER_4_BYTE_ADDR_MODE_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_ENTER_4_BYTE_ADDR_MODE }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = 0, + .writearr = NULL, + .readcnt = 0, + .readarr = NULL, + }}; + + msg_trace("-> %s\n", __func__); + + /* Switch to 4-bytes addressing mode */ + result = spi_send_multicommand(flash, cmds); + if (result) { + msg_cerr("%s failed during command execution\n", __func__); + } + return result; +} + +/* Program one flash byte from 4-bytes addressing mode */ +int spi_byte_program_4ba(struct flashctx *flash, unsigned int addr, + uint8_t databyte) +{ + int result; + struct spi_command cmds[] = { + { + .writecnt = JEDEC_WREN_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_WREN }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = JEDEC_BYTE_PROGRAM_OUTSIZE + 1, + .writearr = (const unsigned char[]){ + JEDEC_BYTE_PROGRAM, + (addr >> 24) & 0xff, + (addr >> 16) & 0xff, + (addr >> 8) & 0xff, + (addr & 0xff), + databyte + }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = 0, + .writearr = NULL, + .readcnt = 0, + .readarr = NULL, + }}; + + msg_trace("-> %s (0x%08X)\n", __func__, addr); + + result = spi_send_multicommand(flash, cmds); + if (result) { + msg_cerr("%s failed during command execution at address 0x%x\n", + __func__, addr); + } + return result; +} + +/* Program flash bytes from 4-bytes addressing mode */ +int spi_nbyte_program_4ba(struct flashctx *flash, unsigned int addr, + const uint8_t *bytes, unsigned int len) +{ + int result; + unsigned char cmd[(JEDEC_BYTE_PROGRAM_OUTSIZE + 1) - 1 + 256] = { + JEDEC_BYTE_PROGRAM, + (addr >> 24) & 0xff, + (addr >> 16) & 0xff, + (addr >> 8) & 0xff, + (addr >> 0) & 0xff + }; + struct spi_command cmds[] = { + { + .writecnt = JEDEC_WREN_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_WREN }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = (JEDEC_BYTE_PROGRAM_OUTSIZE + 1) - 1 + len, + .writearr = cmd, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = 0, + .writearr = NULL, + .readcnt = 0, + .readarr = NULL, + }}; + + msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + len - 1); + + if (!len) { + msg_cerr("%s called for zero-length write\n", __func__); + return 1; + } + if (len > 256) { + msg_cerr("%s called for too long a write\n", __func__); + return 1; + } + + memcpy(&cmd[(JEDEC_BYTE_PROGRAM_OUTSIZE + 1) - 1], bytes, len); + + result = spi_send_multicommand(flash, cmds); + if (result) { + msg_cerr("%s failed during command execution at address 0x%x\n", + __func__, addr); + } + return result; +} + +/* Read flash bytes from 4-bytes addressing mode */ +int spi_nbyte_read_4ba(struct flashctx *flash, unsigned int addr, + uint8_t *bytes, unsigned int len) +{ + const unsigned char cmd[JEDEC_READ_OUTSIZE + 1] = { + JEDEC_READ, + (addr >> 24) & 0xff, + (addr >> 16) & 0xff, + (addr >> 8) & 0xff, + (addr >> 0) & 0xff + }; + + msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + len - 1); + + /* Send Read */ + return spi_send_command(flash, sizeof(cmd), len, cmd, bytes); +} + +/* Erases 4 KB of flash from 4-bytes addressing mode */ +int spi_block_erase_20_4ba(struct flashctx *flash, unsigned int addr, + unsigned int blocklen) +{ + int result; + struct spi_command cmds[] = { + { + .writecnt = JEDEC_WREN_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_WREN }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = JEDEC_SE_OUTSIZE + 1, + .writearr = (const unsigned char[]){ + JEDEC_SE, + (addr >> 24) & 0xff, + (addr >> 16) & 0xff, + (addr >> 8) & 0xff, + (addr & 0xff) + }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = 0, + .writearr = NULL, + .readcnt = 0, + .readarr = NULL, + }}; + + msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + blocklen - 1); + + result = spi_send_multicommand(flash, cmds); + if (result) { + msg_cerr("%s failed during command execution at address 0x%x\n", + __func__, addr); + return result; + } + /* Wait until the Write-In-Progress bit is cleared. + * This usually takes 15-800 ms, so wait in 10 ms steps. + */ + while (spi_read_status_register(flash) & SPI_SR_WIP) + programmer_delay(10 * 1000); + /* FIXME: Check the status register for errors. */ + return 0; +} + +/* Erases 32 KB of flash from 4-bytes addressing mode */ +int spi_block_erase_52_4ba(struct flashctx *flash, unsigned int addr, + unsigned int blocklen) +{ + int result; + struct spi_command cmds[] = { + { + .writecnt = JEDEC_WREN_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_WREN }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = JEDEC_BE_52_OUTSIZE + 1, + .writearr = (const unsigned char[]){ + JEDEC_BE_52, + (addr >> 24) & 0xff, + (addr >> 16) & 0xff, + (addr >> 8) & 0xff, + (addr & 0xff) + }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = 0, + .writearr = NULL, + .readcnt = 0, + .readarr = NULL, + }}; + + msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + blocklen - 1); + + result = spi_send_multicommand(flash, cmds); + if (result) { + msg_cerr("%s failed during command execution at address 0x%x\n", + __func__, addr); + return result; + } + /* Wait until the Write-In-Progress bit is cleared. + * This usually takes 100-4000 ms, so wait in 100 ms steps. + */ + while (spi_read_status_register(flash) & SPI_SR_WIP) + programmer_delay(100 * 1000); + /* FIXME: Check the status register for errors. */ + return 0; +} + +/* Erases 64 KB of flash from 4-bytes addressing mode */ +int spi_block_erase_d8_4ba(struct flashctx *flash, unsigned int addr, + unsigned int blocklen) +{ + int result; + struct spi_command cmds[] = { + { + .writecnt = JEDEC_WREN_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_WREN }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = JEDEC_BE_D8_OUTSIZE + 1, + .writearr = (const unsigned char[]){ + JEDEC_BE_D8, + (addr >> 24) & 0xff, + (addr >> 16) & 0xff, + (addr >> 8) & 0xff, + (addr & 0xff) + }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = 0, + .writearr = NULL, + .readcnt = 0, + .readarr = NULL, + }}; + + msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + blocklen - 1); + + result = spi_send_multicommand(flash, cmds); + if (result) { + msg_cerr("%s failed during command execution at address 0x%x\n", + __func__, addr); + return result; + } + /* Wait until the Write-In-Progress bit is cleared. + * This usually takes 100-4000 ms, so wait in 100 ms steps. + */ + while (spi_read_status_register(flash) & SPI_SR_WIP) + programmer_delay(100 * 1000); + /* FIXME: Check the status register for errors. */ + return 0; +} diff -U 5 -N ./flashrom/spi4ba.h ./flashrom-1868-4ba-1/spi4ba.h --- ./flashrom/spi4ba.h 1970-01-01 03:00:00.000000000 +0300 +++ ./flashrom-1868-4ba-1/spi4ba.h 2015-01-10 18:19:01.000000000 +0300 @@ -0,0 +1,54 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2014 Boris Baykov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +/* + * JEDEC flash chips instructions for 4-bytes addressing + * SPI chip driver functions for 4-bytes addressing + */ + +#ifndef __SPI_4BA_H__ +#define __SPI_4BA_H__ 1 + +/* Enter 4-byte Address Mode */ +#define JEDEC_ENTER_4_BYTE_ADDR_MODE 0xB7 +#define JEDEC_ENTER_4_BYTE_ADDR_MODE_OUTSIZE 0x01 +#define JEDEC_ENTER_4_BYTE_ADDR_MODE_INSIZE 0x00 + +/* Exit 4-byte Address Mode */ +#define JEDEC_EXIT_4_BYTE_ADDR_MODE 0xE9 +#define JEDEC_EXIT_4_BYTE_ADDR_MODE_OUTSIZE 0x01 +#define JEDEC_EXIT_4_BYTE_ADDR_MODE_INSIZE 0x00 + +/* enter 4-bytes addressing mode */ +int spi_enter_4ba_b7(struct flashctx *flash); +int spi_enter_4ba_b7_we(struct flashctx *flash); + +/* read/write flash bytes in 4-bytes addressing mode */ +int spi_byte_program_4ba(struct flashctx *flash, unsigned int addr, uint8_t databyte); +int spi_nbyte_program_4ba(struct flashctx *flash, unsigned int addr, const uint8_t *bytes, unsigned int len); +int spi_nbyte_read_4ba(struct flashctx *flash, unsigned int addr, uint8_t *bytes, unsigned int len); + +/* erase flash bytes in 4-bytes addressing mode */ +int spi_block_erase_20_4ba(struct flashctx *flash, unsigned int addr, unsigned int blocklen); +int spi_block_erase_52_4ba(struct flashctx *flash, unsigned int addr, unsigned int blocklen); +int spi_block_erase_d8_4ba(struct flashctx *flash, unsigned int addr, unsigned int blocklen); + + +#endif /* __SPI_4BA_H__ */
-
Boris Baykov