Hello,
I'm running Ubuntu 12.10 and the latest flashrom from subversion.
I'm getting this warning and would like to know how to find the driver/program that's accessing the flash chip? Thanks!
# ./flashrom --programmer internal -r /tmp/k -VVV flashrom v0.9.6.1-r1671 on Linux 3.5.0-25-generic (x86_64) flashrom is free software, get the source code at http://www.flashrom.org
flashrom was built with libpci 3.1.9, GCC 4.7.2, little endian ... Found chipset "AMD Hudson" with PCI ID 1022:780e. Enabling flash write... SPI base address is at 0xfec10000 AltSpiCSEnable=0, SpiRomEnable=1, AbortEnable=0 PrefetchEnSPIFromIMC=0, PrefetchEnSPIFromHost=1, SpiOpEnInLpcMode=1 SpiArbEnable=1, SpiAccessMacRomEn=1, SpiHostAccessRomEn=1, ArbWaitCount=7, SpiBridgeDisable=1, DropOneClkOnRd=0 NormSpeed is Reserved MHz GPIO11 used for SPI_DO GPIO12 used for SPI_DI GPIO31 used for SPI_HOLD GPIO32 used for SPI_CS GPIO47 used for SPI_CLK SB700 IMC is not active. ROM strap override is not active OK. The following protocols are supported: LPC, FWH, SPI. Probing for AMIC A25L05PT, 64 kB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=4 Writing: SB600 FIFO pointer is 0, wanted 0 Executing: SB600 FIFO pointer corruption! Pointer is 3, wanted 4 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip.
-
Wei Hu