Hello. First of all, thank you for flashrom. I have an ECS k7vta3 mobo with VT8233A southbridge.
# flashrom -r bios.old flashrom v0.9.4-r1394 on Linux 3.2.0-1-686-pae (i686), built with libpci 3.1.7, GCC 4.6.1, little endian flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK. Found chipset "VIA VT8233A". Enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Found PMC flash chip "Pm29F002T" (256 kB, Parallel) at physical address 0xfffc0000. === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom@flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help!
I have the latest BIOS (k7vta330d.exe) here. To write it I would simply run
# flashrom -wv k7vta330d.exe
right? Should I add any -V just in case too?
-
Sergio Cipolla