Re: [flashrom] Board enable for Asus A7V600-X.

[Putlinuxonit]

when i apply the a7v600-x board enable patch to r682 and run it . i get

root@sysresccd /root/A7V600-X % ./flashrom
> *flashrom v0.9.0-r682*
> No coreboot table found.
> Found chipset "VIA VT8237", enabling flash write... OK.
> This chipset supports the following protocols: Non-SPI.
> Disabling flash write protection for board "ASUS A7V600-X"...
> ERROR: IT8712F SuperIO not found.
> FAILED!
> Calibrating delay loop... OK.
> Found chip "PMC Pm49FL002" (256 KB, LPC,FWH) at physical address
> 0xfffc0000.
> No operations were specified.

latest version r701 gives:
> root@sysresccd /root % ./flashrom
> *flashrom v0.9.0-r701*
> No coreboot table found.
> Found chipset "VIA VT8237", enabling flash write... OK.
> This chipset supports the following protocols: Non-SPI.
> Calibrating delay loop... OK.
> Found chip "PMC Pm49FL002" (256 KB, LPC,FWH) at physical address
> 0xfffc0000.
> No operations were specified.

yet superiotool finds the IT8712F chipset

root@sysresccd /root/A7V600-X % ./superiotool
> superiotool r4424
> Found ITE IT8712F (id=0x8712, rev=0x5) at 0x2e
> Found Winbond W83877TF (id=0x0c) at 0x370
> Found Winbond W83877TF (id=0x0c) at 0x370
> Found Winbond W83877TF (id=0x0c) at 0x370
> Found Winbond W83877TF (id=0x0c) at 0x370

find attached more detailed dumps.

NB: The only other modification i did to my local svn was patching with
updated flashchips.c timings on both r682 and r701 used here.

Enjoy!
Udu

Board enable for Asus A7V600-X.

[Luc Verhaegen]

On Thu, Aug 27, 2009 at 11:37:30AM +0100, Putlinuxonit wrote:
> when i apply the a7v600-x board enable patch to r682 and run it . i get

Hrm... i cannot spot what is wrong with my code, i did find something 
else and now added printing of the failing id to hopefully be able to 
spot what is wrong.

Luc Verhaegen.