Similarly to the previous PCI self-clean up patch this one allows to get rid of a huge number of programmer shutdown functions and makes introducing bugs harder. It adds a new function physmap_autocleanup() that takes care of unmapping at shutdown. Callers are changed where it makes sense.
Signed-off-by: Stefan Tauner stefan.tauner@student.tuwien.ac.at --- chipset_enable.c | 12 +++++++----- drkaiser.c | 12 ++---------- gfxnvidia.c | 11 ++--------- ichspi.c | 4 +++- it85spi.c | 3 +++ mcp6x_spi.c | 15 +++++---------- nicintel.c | 22 +++------------------- nicintel_spi.c | 10 +++------- ogp_spi.c | 11 ++--------- physmap.c | 54 ++++++++++++++++++++++++++++++++++++++++++++---------- programmer.h | 1 + satamv.c | 11 +---------- satasii.c | 14 ++++---------- sb600spi.c | 6 ++++-- 14 files changed, 84 insertions(+), 102 deletions(-)
diff --git a/chipset_enable.c b/chipset_enable.c index 267008c..8bce1a3 100644 --- a/chipset_enable.c +++ b/chipset_enable.c @@ -497,7 +497,9 @@ static int enable_flash_tunnelcreek(struct pci_dev *dev, const char *name) msg_pdbg("\nRoot Complex Register Block address = 0x%x\n", tmp);
/* Map RCBA to virtual memory */ - rcrb = physmap("ICH RCRB", tmp, 0x4000); + rcrb = physmap_autocleanup("ICH RCRB", tmp, 0x4000); + if (rcrb == ERROR_PTR) + return 1;
/* Test Boot BIOS Strap Status */ bnt = mmio_readl(rcrb + 0x3410); @@ -568,7 +570,9 @@ static int enable_flash_ich_dc_spi(struct pci_dev *dev, const char *name, msg_pdbg("Root Complex Register Block address = 0x%x\n", tmp);
/* Map RCBA to virtual memory */ - rcrb = physmap("ICH RCRB", tmp, 0x4000); + rcrb = physmap_autocleanup("ICH RCRB", tmp, 0x4000); + if (rcrb == ERROR_PTR) + return 1;
gcs = mmio_readl(rcrb + 0x3410); msg_pdbg("GCS = 0x%x: ", gcs); @@ -721,10 +725,8 @@ static int enable_flash_vt_vx(struct pci_dev *dev, const char *name) case 0x8410: /* VX900 */ mmio_base = pci_read_long(dev, 0xbc) << 8; mmio_base_physmapped = physmap("VIA VX MMIO register", mmio_base, SPI_CNTL_LEN); - if (mmio_base_physmapped == ERROR_PTR) { - physunmap(mmio_base_physmapped, SPI_CNTL_LEN); + if (mmio_base_physmapped == ERROR_PTR) return ERROR_FATAL; - }
/* Offset 0 - Bit 0 holds SPI Bus0 Enable Bit. */ spi_cntl = mmio_readl(mmio_base_physmapped) + 0x00; diff --git a/drkaiser.c b/drkaiser.c index a6eca1c..062ec73 100644 --- a/drkaiser.c +++ b/drkaiser.c @@ -56,12 +56,6 @@ static const struct par_programmer par_programmer_drkaiser = { .chip_writen = fallback_chip_writen, };
-static int drkaiser_shutdown(void *data) -{ - physunmap(drkaiser_bar, DRKAISER_MEMMAP_SIZE); - return 0; -} - int drkaiser_init(void) { uint32_t addr; @@ -77,10 +71,8 @@ int drkaiser_init(void) PCI_MAGIC_DRKAISER_VALUE);
/* Map 128kB flash memory window. */ - drkaiser_bar = physmap("Dr. Kaiser PC-Waechter flash memory", - addr, DRKAISER_MEMMAP_SIZE); - - if (register_shutdown(drkaiser_shutdown, NULL)) + drkaiser_bar = physmap_autocleanup("Dr. Kaiser PC-Waechter flash memory", addr, DRKAISER_MEMMAP_SIZE); + if (drkaiser_bar == ERROR_PTR) return 1;
max_rom_decode.parallel = 128 * 1024; diff --git a/gfxnvidia.c b/gfxnvidia.c index a994d68..ec63cf6 100644 --- a/gfxnvidia.c +++ b/gfxnvidia.c @@ -77,12 +77,6 @@ static const struct par_programmer par_programmer_gfxnvidia = { .chip_writen = fallback_chip_writen, };
-static int gfxnvidia_shutdown(void *data) -{ - physunmap(nvidia_bar, GFXNVIDIA_MEMMAP_SIZE); - return 0; -} - int gfxnvidia_init(void) { uint32_t reg32; @@ -96,9 +90,8 @@ int gfxnvidia_init(void) io_base_addr += 0x300000; msg_pinfo("Detected NVIDIA I/O base address: 0x%x.\n", io_base_addr);
- nvidia_bar = physmap("NVIDIA", io_base_addr, GFXNVIDIA_MEMMAP_SIZE); - - if (register_shutdown(gfxnvidia_shutdown, NULL)) + nvidia_bar = physmap_autocleanup("NVIDIA", io_base_addr, GFXNVIDIA_MEMMAP_SIZE); + if (nvidia_bar == ERROR_PTR) return 1;
/* Allow access to flash interface (will disable screen). */ diff --git a/ichspi.c b/ichspi.c index fadfe62..4b52745 100644 --- a/ichspi.c +++ b/ichspi.c @@ -1845,7 +1845,9 @@ int via_init_spi(struct pci_dev *dev, uint32_t mmio_base) { int i;
- ich_spibar = physmap("VIA SPI MMIO registers", mmio_base, 0x70); + ich_spibar = physmap_autocleanup("VIA SPI MMIO registers", mmio_base, 0x70); + if (ich_spibar == ERROR_PTR) + return ERROR_FATAL; /* Do we really need no write enable? Like the LPC one at D17F0 0x40 */
/* Not sure if it speaks all these bus protocols. */ diff --git a/it85spi.c b/it85spi.c index 0b074eb..b778436 100644 --- a/it85spi.c +++ b/it85spi.c @@ -262,6 +262,9 @@ static int it85xx_spi_common_init(struct superio s) * Major TODO here, and it will be a lot of work. */ base = (chipaddr)physmap("it85 communication", 0xFFFFF000, 0x1000); + if (base == ERROR_PTR) + return 1; + msg_pdbg("%s():%d base=0x%08x\n", __func__, __LINE__, (unsigned int)base); ce_high = (unsigned char *)(base + 0xE00); /* 0xFFFFFE00 */ diff --git a/mcp6x_spi.c b/mcp6x_spi.c index ac40557..0c519eb 100644 --- a/mcp6x_spi.c +++ b/mcp6x_spi.c @@ -135,25 +135,20 @@ int mcp6x_spi_init(int want_spi)
/* Accessing a NULL pointer BAR is evil. Don't do it. */ if (!mcp6x_spibaraddr && want_spi) { - msg_perr("Error: Chipset is strapped for SPI, but MCP SPI BAR " - "is invalid.\n"); + msg_perr("Error: Chipset is strapped for SPI, but MCP SPI BAR is invalid.\n"); return 1; } else if (!mcp6x_spibaraddr && !want_spi) { msg_pdbg("MCP SPI is not used.\n"); return 0; } else if (mcp6x_spibaraddr && !want_spi) { - msg_pdbg("Strange. MCP SPI BAR is valid, but chipset apparently" - " doesn't have SPI enabled.\n"); + msg_pdbg("Strange. MCP SPI BAR is valid, but chipset apparently doesn't have SPI enabled.\n"); /* FIXME: Should we enable SPI anyway? */ return 0; } /* Map the BAR. Bytewise/wordwise access at 0x530 and 0x540. */ - mcp6x_spibar = physmap("NVIDIA MCP6x SPI", mcp6x_spibaraddr, 0x544); - -#if 0 - /* FIXME: Run the physunmap in a shutdown function. */ - physunmap(mcp6x_spibar, 0x544); -#endif + mcp6x_spibar = physmap_autocleanup("NVIDIA MCP6x SPI", mcp6x_spibaraddr, 0x544); + if (mcp6x_spibar == ERROR_PTR) + return 1;
status = mmio_readw(mcp6x_spibar + 0x530); msg_pdbg("SPI control is 0x%04x, req=%i, gnt=%i\n", diff --git a/nicintel.c b/nicintel.c index 8481915..5463af2 100644 --- a/nicintel.c +++ b/nicintel.c @@ -59,13 +59,6 @@ static const struct par_programmer par_programmer_nicintel = { .chip_writen = fallback_chip_writen, };
-static int nicintel_shutdown(void *data) -{ - physunmap(nicintel_control_bar, NICINTEL_CONTROL_MEMMAP_SIZE); - physunmap(nicintel_bar, NICINTEL_MEMMAP_SIZE); - return 0; -} - int nicintel_init(void) { uintptr_t addr; @@ -81,19 +74,15 @@ int nicintel_init(void) */ addr = pcidev_init(PCI_BASE_ADDRESS_2, nics_intel);
- nicintel_bar = physmap("Intel NIC flash", addr, NICINTEL_MEMMAP_SIZE); + nicintel_bar = physmap_autocleanup("Intel NIC flash", addr, NICINTEL_MEMMAP_SIZE); if (nicintel_bar == ERROR_PTR) - goto error_out_unmap; + return 1;
/* FIXME: Using pcidev_dev _will_ cause pretty explosions in the future. */ addr = pcidev_readbar(pcidev_dev, PCI_BASE_ADDRESS_0); /* FIXME: This is not an aligned mapping. Use 4k? */ - nicintel_control_bar = physmap("Intel NIC control/status reg", - addr, NICINTEL_CONTROL_MEMMAP_SIZE); + nicintel_control_bar = physmap_autocleanup("Intel NIC control/status reg", addr, NICINTEL_CONTROL_MEMMAP_SIZE); if (nicintel_control_bar == ERROR_PTR) - goto error_out; - - if (register_shutdown(nicintel_shutdown, NULL)) return 1;
/* FIXME: This register is pretty undocumented in all publicly available @@ -111,11 +100,6 @@ int nicintel_init(void) register_par_programmer(&par_programmer_nicintel, BUS_PARALLEL);
return 0; - -error_out_unmap: - physunmap(nicintel_bar, NICINTEL_MEMMAP_SIZE); -error_out: - return 1; }
static void nicintel_chip_writeb(const struct flashctx *flash, uint8_t val, diff --git a/nicintel_spi.c b/nicintel_spi.c index f61c2b1..8630f3f 100644 --- a/nicintel_spi.c +++ b/nicintel_spi.c @@ -151,16 +151,12 @@ static int nicintel_spi_shutdown(void *data) { uint32_t tmp;
- /* Disable writes manually. See the comment about EECD in - * nicintel_spi_init() for details. - */ + /* Disable writes manually. See the comment about EECD in nicintel_spi_init() for details. */ tmp = pci_mmio_readl(nicintel_spibar + EECD); tmp &= ~FLASH_WRITES_ENABLED; tmp |= FLASH_WRITES_DISABLED; pci_mmio_writel(tmp, nicintel_spibar + EECD);
- physunmap(nicintel_spibar, MEMMAP_SIZE); - return 0; }
@@ -174,8 +170,8 @@ int nicintel_spi_init(void) /* No need to check for errors, pcidev_init() will not return in case of errors. */ io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, nics_intel_spi);
- nicintel_spibar = physmap("Intel Gigabit NIC w/ SPI flash", - io_base_addr, MEMMAP_SIZE); + nicintel_spibar = physmap_autocleanup("Intel Gigabit NIC w/ SPI flash", io_base_addr, MEMMAP_SIZE); + /* Automatic restore of EECD on shutdown is not possible because EECD * does not only contain FLASH_WRITES_DISABLED|FLASH_WRITES_ENABLED, * but other bits with side effects as well. Those other bits must be diff --git a/ogp_spi.c b/ogp_spi.c index 6fb1a77..d66b2ef 100644 --- a/ogp_spi.c +++ b/ogp_spi.c @@ -97,12 +97,6 @@ static const struct bitbang_spi_master bitbang_spi_master_ogp = { .half_period = 0, };
-static int ogp_spi_shutdown(void *data) -{ - physunmap(ogp_spibar, 4096); - return 0; -} - int ogp_spi_init(void) { char *type; @@ -133,9 +127,8 @@ int ogp_spi_init(void)
io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, ogp_spi);
- ogp_spibar = physmap("OGP registers", io_base_addr, 4096); - - if (register_shutdown(ogp_spi_shutdown, NULL)) + ogp_spibar = physmap_autocleanup("OGP registers", io_base_addr, 4096); + if (ogp_spibar == ERROR_PTR) return 1;
if (bitbang_spi_init(&bitbang_spi_master_ogp)) diff --git a/physmap.c b/physmap.c index 5aa9874..a9445d5 100644 --- a/physmap.c +++ b/physmap.c @@ -21,6 +21,7 @@ */
#include <unistd.h> +#include <stdbool.h> #include <stdio.h> #include <stdlib.h> #include <string.h> @@ -214,13 +215,25 @@ void physunmap(void *virt_addr, size_t len) } #endif
-#define PHYSMAP_NOFAIL 0 -#define PHYSMAP_MAYFAIL 1 -#define PHYSMAP_RW 0 -#define PHYSMAP_RO 1 +struct physmap_stutdown_data { + void *addr; + size_t len; +};
-static void *physmap_common(const char *descr, unsigned long phys_addr, - size_t len, int mayfail, int readonly) +static int physmap_shutdown(void *data) +{ + if (data == NULL) { + msg_perr("%s: tried to shutdown without valid data!\n", __func__); + return 1; + } + struct physmap_stutdown_data *d = data; + physunmap(d->addr, d->len); + free(data); + return 0; +} + +static void *physmap_common(const char *descr, unsigned long phys_addr, size_t len, bool mayfail, + bool readonly, bool autocleanup) { void *virt_addr;
@@ -268,19 +281,40 @@ static void *physmap_common(const char *descr, unsigned long phys_addr, exit(3); }
+ if (autocleanup) { + struct physmap_stutdown_data *d = malloc(sizeof(struct physmap_stutdown_data)); + if (d == NULL) { + msg_perr("%s: Out of memory!\n", __func__); + goto unmap_out; + } + + d->addr = virt_addr; + d->len = len; + if (register_shutdown(physmap_shutdown, d) != 0) { + msg_perr("%s: Could not register shutdown function!\n", __func__); + goto unmap_out; + } + } + return virt_addr; +unmap_out: + physunmap(virt_addr, len); + return ERROR_PTR; }
void *physmap(const char *descr, unsigned long phys_addr, size_t len) { - return physmap_common(descr, phys_addr, len, PHYSMAP_NOFAIL, - PHYSMAP_RW); + return physmap_common(descr, phys_addr, len, false, false, false); +} + +void *physmap_autocleanup(const char *descr, unsigned long phys_addr, size_t len) +{ + return physmap_common(descr, phys_addr, len, false, false, true); }
void *physmap_try_ro(const char *descr, unsigned long phys_addr, size_t len) { - return physmap_common(descr, phys_addr, len, PHYSMAP_MAYFAIL, - PHYSMAP_RO); + return physmap_common(descr, phys_addr, len, true, true, false); }
#if defined(__i386__) || defined(__x86_64__) diff --git a/programmer.h b/programmer.h index 7703ec1..5cbf289 100644 --- a/programmer.h +++ b/programmer.h @@ -272,6 +272,7 @@ int processor_flash_enable(void);
/* physmap.c */ void *physmap(const char *descr, unsigned long phys_addr, size_t len); +void *physmap_autocleanup(const char *descr, unsigned long phys_addr, size_t len); void *physmap_try_ro(const char *descr, unsigned long phys_addr, size_t len); void physunmap(void *virt_addr, size_t len); #if CONFIG_INTERNAL == 1 diff --git a/satamv.c b/satamv.c index 46a0e2d..726dd5a 100644 --- a/satamv.c +++ b/satamv.c @@ -57,12 +57,6 @@ static const struct par_programmer par_programmer_satamv = { .chip_writen = fallback_chip_writen, };
-static int satamv_shutdown(void *data) -{ - physunmap(mv_bar, 0x20000); - return 0; -} - /* * Random notes: * FCE# Flash Chip Enable @@ -93,13 +87,10 @@ int satamv_init(void) */ addr = pcidev_init(PCI_BASE_ADDRESS_0, satas_mv);
- mv_bar = physmap("Marvell 88SX7042 registers", addr, 0x20000); + mv_bar = physmap_autocleanup("Marvell 88SX7042 registers", addr, 0x20000); if (mv_bar == ERROR_PTR) return 1;
- if (register_shutdown(satamv_shutdown, NULL)) - return 1; - tmp = pci_mmio_readl(mv_bar + FLASH_PARAM); msg_pspew("Flash Parameters:\n"); msg_pspew("TurnOff=0x%01x\n", (tmp >> 0) & 0x7); diff --git a/satasii.c b/satasii.c index 730c420..36f4cd1 100644 --- a/satasii.c +++ b/satasii.c @@ -54,12 +54,6 @@ static const struct par_programmer par_programmer_satasii = { .chip_writen = fallback_chip_writen, };
-static int satasii_shutdown(void *data) -{ - physunmap(sii_bar, SATASII_MEMMAP_SIZE); - return 0; -} - static uint32_t satasii_wait_done(void) { uint32_t ctrl_reg; @@ -94,15 +88,15 @@ int satasii_init(void) reg_offset = 0x50; }
- sii_bar = physmap("SATA SiI registers", addr, SATASII_MEMMAP_SIZE) + reg_offset; + sii_bar = physmap_autocleanup("SATA SiI registers", addr, SATASII_MEMMAP_SIZE); + if (sii_bar == ERROR_PTR) + return 1; + sii_bar += reg_offset;
/* Check if ROM cycle are OK. */ if ((id != 0x0680) && (!(pci_mmio_readl(sii_bar) & (1 << 26)))) msg_pinfo("Warning: Flash seems unconnected.\n");
- if (register_shutdown(satasii_shutdown, NULL)) - return 1; - register_par_programmer(&par_programmer_satasii, BUS_PARALLEL);
return 0; diff --git a/sb600spi.c b/sb600spi.c index fe60aa9..7888bb9 100644 --- a/sb600spi.c +++ b/sb600spi.c @@ -224,8 +224,10 @@ int sb600_probe_spi(struct pci_dev *dev) return 0;
/* Physical memory has to be mapped at page (4k) boundaries. */ - sb600_spibar = physmap("SB600 SPI registers", tmp & 0xfffff000, - 0x1000); + sb600_spibar = physmap_autocleanup("SB600 SPI registers", tmp & 0xfffff000, 0x1000); + if (sb600_spibar == ERROR_PTR) + return 1; + /* The low bits of the SPI base address are used as offset into * the mapped page. */
-
Stefan Tauner