On Thu, 5 Nov 2015 03:38:14 +0800 Greg Tippit greg@tippitt.net wrote:
First off, thank you for your work on such a useful program. I have used it more times that I can remember, and I have never had a single problem flashing a motherboard BIOS using your program. If you accepted PayPal donations, I would buy you all a beverage of your choice.
I have a new stick PC from China called the MeeGoPad T02, which uses an Intel Atom SOC.
They have a little English support at x86pad.com, where I found a updated BIOS for this device.
When I made of backup of the existing BIOS on the device, I got the message about it not yet having native support. The read seemed to go okay. I have attached a copy of the verbose output as you requested.
Assuming all the normal warnings, is it safe to try flashing the new BIOS using flashrom, or should I wait for you to work your "Native Magic"?
Hi,
AFAICT it should work fine. However, full support was already added and is available since commit r1889. So you could also upgrade if you like. I'd appreciate a report afterwards in any case. ;)
I run the Ubuntu 14.04 LTS version, and forgot to check for an updated version of flashrom.
I tried it, and the flash seem to go fine. The BIOS update didn't solve the problem I was having, but it Flashrom did its part valiantly.
Thanks Greg
On Thu, Nov 5, 2015 at 5:33 PM, Stefan Tauner < stefan.tauner@alumni.tuwien.ac.at> wrote:
On Thu, 5 Nov 2015 03:38:14 +0800 Greg Tippit greg@tippitt.net wrote:
First off, thank you for your work on such a useful program. I have used it more times that I can remember, and I have never had a single problem flashing a motherboard BIOS using your program. If you accepted PayPal donations, I would buy you all a beverage of your choice.
I have a new stick PC from China called the MeeGoPad T02, which uses an Intel Atom SOC.
They have a little English support at x86pad.com, where I found a updated BIOS for this device.
When I made of backup of the existing BIOS on the device, I got the message about it not yet having native support. The read seemed to go okay. I have attached a copy of the verbose output as you requested.
Assuming all the normal warnings, is it safe to try flashing the new BIOS using flashrom, or should I wait for you to work your "Native Magic"?
Hi,
AFAICT it should work fine. However, full support was already added and is available since commit r1889. So you could also upgrade if you like. I'd appreciate a report afterwards in any case. ;)
-- Kind regards/Mit freundlichen Grüßen, Stefan Tauner