Report of flashrom failure (Intel DQ67OW motherboard)

[Tom Crane]

Dear Flashrom developers,

Please find attached my failure report as suggested in flashrom 
O/P.  The PC has been updated with the latest BIOS (file 
SWQ6710H.86A.0070.BI.zip from Intel) and I am running a built-today git 
version of flashrom.

Thanks

Tom Crane

[Angel Pons]

Hello Tom,

On Fri, Dec 28, 2018 at 7:03 PM Tom Crane  wrote:
> Dear Flashrom developers,
> Please find attached my failure report as suggested in flashrom O/P.  The PC has been updated with the latest BIOS (file SWQ6710H.86A.0070.BI.zip from Intel) and I am running a built-today git version of flashrom.

I can see a few things:
> flashrom v0.9.9-r1955 on Linux 4.19.8 (x86_64)

This is from git? It seems to be a rather old version.
> 0x54: 0x00000000 FREG0: Warning: Flash Descriptor region (0x00000000-0x00000fff) is read-only.
> 0x58: 0x07ff0580 FREG1: BIOS region (0x00580000-0x007fffff) is read-write.
> 0x5C: 0x057f0003 FREG2: Warning: Management Engine region (0x00003000-0x0057ffff) is locked.
> 0x60: 0x00020001 FREG3: Gigabit Ethernet region (0x00001000-0x00002fff) is read-write.

Some regions are unreadable. Trying to read them results in an error,
as expected.
If you want to completely backup the chip, either disabling region
protections or using an external programmer is needed.
> Thanks
>
> Tom Crane

Best regards,

Angel Pons