Re: [flashrom] using DLP-USB1232H/MinnowboardMAX, verification error. is it due to DP_IO3L in SPI header not connected ?

[Sathish Kumar Balasubramaniam -ERS, HCL Tech]

I got the problem.
It's since I provided 1.8v to SPI chip VCC while the CS,SCLK,SI,SO logic levels (from DLP-USB1232H) are higher than 1.8v which also needs to be down to 1.8v to work.

Regards,
B.Sathish Kumar

-----Original Message-----
From: Sathish Kumar Balasubramaniam -ERS, HCL Tech 
Sent: 19 April 2016 00:59
To: [e-mail]
Subject: RE: using DLP-USB1232H/MinnowboardMAX, verification error. is it due to DP_IO3L in SPI header not connected ?

forgot to add env info

OS: Ubuntu 14.04.4 64bit
flashrom version - 0.9.9

::DISCLAIMER::
----------------------------------------------------------------------------------------------------------------------------------------------------

The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted,
lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents
(with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates.
Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the
views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification,
distribution and / or publication of this message without the prior written consent of authorized representative of
HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately.
Before opening any email and/or attachments, please check them for viruses and other defects.

----------------------------------------------------------------------------------------------------------------------------------------------------