Hi folks,
(I'm deliberately breaking the thread otherwise most people will probably miss this as the original thread is from Nov 2009)
On Wed, Dec 23, 2009 at 04:08:10AM +0100, Luc Verhaegen wrote:
On Mon, Nov 09, 2009 at 08:45:45PM -0800, Fraser Hanson wrote:
Hi,
I flashed my bios with flashrom tonight and got the scary warning message saying "erase failed" and "do not reboot".
I haven't rebooted.
As far as I can tell from using flashrom itself, everything is actually fine. The erase appears to have failed at physical address 0, which I would guess means that nothing actually happened.
I had taken a dump of the original bios before starting, and "flashrom -v" now verifies that it is identical.
Furthermore, a new dump of the bios matches the original dump from before I tried to write the bios.
My board is an MSI K8N Neo4 Platinum.
Output from my dump attempt and subsequent messing around follows.
Do I have your blessing to reboot my machine?
--Fraser
-> r816.
Luc Verhaegen.
I'm browsing some old board reports on the mailing list and stumbled upon this one here. What we have right now in svn trunk is this:
* Suited for: * - MSI K8N Neo4: NVIDIA CK804
[...]
{0x10DE, 0x005E, 0x1462, 0x7125, 0x10DE, 0x0052, 0x1462, 0x7125, NULL, NULL, NULL, "MSI", "K8N Neo4-F", 0, OK, nvidia_mcp_gpio2_raise},
I.e., the comment talks about "MSI K8N Neo4" while the name in the board-enable is "MSI K8N Neo4-F" (note the added -F). However, in
http://www.flashrom.org/pipermail/flashrom/2009-November/000889.html
the user reported that the board is a "K8N Neo4 Platinum (PCB 1.0)" from
http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=165
On the MSI page, searching for "neo4" I can see:
K8N Neo4 Platinum (PCB 1.0) K8N Neo4 Platinum (PCB 3.0) K8N Neo4-F (PCB 1.0) K8N Neo4-F (PCB 3.0) K8N Neo4-FI (PCB 1.0) K8N Neo4-FX (PCB 1.0)
So there are two Neo4-F versions (probably differing hardware) and two Neo4-F versions (also potentially differing hardware). I cannot spot any pure "Neo4" board without any suffix on the current website.
Fraser, could you please use the latest flashrom from svn and send us the following info:
* flashrom -V * lspci -nnvvvxxx * superiotool -deV
Also, can you confirm that the board you have is indeed "K8N Neo4 Platinum (PCB 1.0)"? It's probably best to check what is actually printed on the board itself, I wouldn't entirely trust dmidecode or similar tools.
We should fix the board name in the code in one direction or the other. It would also be nice to get a report of whether the current board-enable for the mainboard works (this requires a write or erase test), I think we never got a report, so we should probably mark the board-enable as untested for now.
Thanks, Uwe.
-
Uwe Hermann