On Wed, 8 Feb 2012 20:47:13 +0100 Vince S vince06fr@gmail.com wrote:
can i restore my bios from my linux session or do i have to reboot (i have another bios with i can reboot) to flash it from a freedos live usb?
*if* you are talking about the acer you reported last month and *if* i understood your question correctly, *then* you should be able to write the flash chip with flashrom in your linux session. your previous log confirmed at least that erasing works. writing will almost always work if erase works. if you read out the good contents with -r, install the bad chip, write the previously read good content with -w, the two chips should be identical. please ask further questions if something is not clear.
Yes i am talking about the acer i reported last month.. so if i understand, i must before flashing make a backup with the good chip installed with the command : [sudo flashrom -r fichier.ROM]
"The filename and his extension is it important? and is it sure there are no risk for the good chip?"
and after i had to install the bad chip and flash it with the command
[sudo flashrom -w fichier.ROM]
But i had try to flash the bad chip with the bios that i have saved last month and it make error to write(the command i try was [sudo flashrom -w 61AO615.BIN], Erase the chip with the command [sudo flashrom -E] is ok This night i'm at work and i have no access at my pc so i send you the log of my attempt tomorow
Thanks for your work and your answers and excuse me for my english (i'm french) Good night
2012/2/8, Stefan Tauner stefan.tauner@student.tuwien.ac.at:
On Wed, 8 Feb 2012 20:47:13 +0100 Vince S vince06fr@gmail.com wrote:
can i restore my bios from my linux session or do i have to reboot (i have another bios with i can reboot) to flash it from a freedos live usb?
*if* you are talking about the acer you reported last month and *if* i understood your question correctly, *then* you should be able to write the flash chip with flashrom in your linux session. your previous log confirmed at least that erasing works. writing will almost always work if erase works. if you read out the good contents with -r, install the bad chip, write the previously read good content with -w, the two chips should be identical. please ask further questions if something is not clear.
-- Kind regards/Mit freundlichen Grüßen, Stefan Tauner