Re: [flashrom] Biostar H61MU3

[Stefan Tauner]

On Wed, 22 Feb 2012 08:52:08 -0800
Peter Van Eenoo  wrote:
> Here is the output from -V
>
> […]
> Found Eon flash chip "EN25Q32(A/B)" (4096 kB, SPI).
> This chip may contain one-time programmable memory. flashrom cannot read
> and may never be able to write it, hence it may not be able to completely
> clone the contents of this chip (see man page for details).
> ===
> This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
> The test status of this chip may have been updated in the latest development
> version of flashrom. If you are running the latest development version,
> please email a report to [e-mail] if any of the above
> operations
> work correctly for you with this flash part. Please include the flashrom
> output with the additional -V option for all operations you tested (-V, -Vr,
> -VE, -Vw), and mention which mainboard or programmer you tested.
> Please mention your board in the subject line. Thanks for your help!

Hello Peter,

thanks for your report!

I have added the board to our list of (un)supported boards (with an
appropriate note) and will commit that later together with other small
changes.

Can you please take a look at the board itself and verify that the flash
chip is really an Eon EN25Q32 (variant)? The chip is located near the
southbridge (heatsink) opposite of the pci slots. I can then mark the
probe operation for it as tested…

Biostar H61MU3

[Peter Van Eenoo]

Hi Stefan,

I can confirm the chip is cFeon EN25Q32A

Güße aus den USA

Peter

On Wed, Feb 22, 2012 at 12:32 PM, Stefan Tauner <
[e-mail]> wrote:
> On Wed, 22 Feb 2012 08:52:08 -0800
> Peter Van Eenoo  wrote:
> > Here is the output from -V
> >
> > […]
> > Found Eon flash chip "EN25Q32(A/B)" (4096 kB, SPI).
> > This chip may contain one-time programmable memory. flashrom cannot read
> > and may never be able to write it, hence it may not be able to completely
> > clone the contents of this chip (see man page for details).
> > ===
> > This flash part has status UNTESTED for operations: PROBE READ ERASE
>
> WRITE
> > The test status of this chip may have been updated in the latest
>
> development
> > version of flashrom. If you are running the latest development version,
> > please email a report to [e-mail] if any of the above
> > operations
> > work correctly for you with this flash part. Please include the flashrom
> > output with the additional -V option for all operations you tested (-V,
>
> -Vr,
> > -VE, -Vw), and mention which mainboard or programmer you tested.
> > Please mention your board in the subject line. Thanks for your help!
>
> Hello Peter,
>
> thanks for your report!
>
> I have added the board to our list of (un)supported boards (with an
> appropriate note) and will commit that later together with other small
> changes.
>
> Can you please take a look at the board itself and verify that the flash
> chip is really an Eon EN25Q32 (variant)? The chip is located near the
> southbridge (heatsink) opposite of the pci slots. I can then mark the
> probe operation for it as tested…
> --
> Kind regards/Mit freundlichen Grüßen, Stefan Tauner