[PATCH] winbondw25x32/64 support - flashrom

26 Nov 2009

Add entries of W25x32 and W25x64. The modle_ids are already in the
header.
W25x32 has been successfully probed.
W25x64 is not available. I just get information from datasheet.
Signed-off-by: Zheng Bao zheng.bao@amd.com
Index: flashchips.c
===================================================================

--- flashchips.c	(revision 781)
+++ flashchips.c	(working copy)
@@ -3038,6 +3038,38 @@
{
    	.vendor		= "Winbond",
+		.name		= "W25x32",
+		.bustype	= CHIP_BUSTYPE_SPI,
+		.manufacture_id	= WINBOND_NEX_ID,
+		.model_id	= W_25X32,
+		.total_size	= 4096,
+		.page_size	= 256,
+		.tested		= TEST_OK_PROBE,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.erase		= spi_chip_erase_c7,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+	},
+
+	{
+		.vendor		= "Winbond",
+		.name		= "W25x64",
+		.bustype	= CHIP_BUSTYPE_SPI,
+		.manufacture_id	= WINBOND_NEX_ID,
+		.model_id	= W_25X64,
+		.total_size	= 8192,
+		.page_size	= 256,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.erase		= spi_chip_erase_c7,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+	},
+
+	{
+		.vendor		= "Winbond",
    	.name		= "W29C011",
    	.bustype	= CHIP_BUSTYPE_PARALLEL,
    	.manufacture_id	= WINBOND_ID,

    