Hi Владимир,
On 14.08.2018 09:46, Владимир Амельянович wrote:
I have tried to write saved image finally. And got the following message:
FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... Reading 8388608 bytes starting at 0x000000. done. Apparently at least some data has changed. Your flash chip is in an unknown state. Get help on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org with the subject "FAILED: <your board name>"!
DO NOT REBOOT OR POWEROFF! Restoring MMIO space at 0x7fb5896f08a0 Restoring PCI config space for 00:1f:0 reg 0xdc
-V output attached.
What should i do next? PC is power on.
Try to verify (flashrom -v) the image you just wrote. I hope it just succeeded but run into an error afterwards.
From your log:
0x805000-0x805fff:E Request to erase some inaccessible memory address(es) (addr=0x805000, len=4096). Not erasing anything.
This is already beyond your actual flash chip (0x800000), so it al- ready wrote the image. I also found the cause for flashrom running off, your firmware descriptor seems misconfigured which triggered a bug in flashrom:
0xD0: 0xffffffff (FPB)
This register is supposed to be 0 instead *shrug*. But there's obviously something to fix in flashrom to handle wrong values more gracefully.
So, hope your board is fine, Nico
-
Nico Huber