-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
I can confirm that the Suprmicro X7SPA-H board can be safely flashed using flashrom. A similar board is listed in the wiki, but for the sake of completeness add this one as well. The full verbose flash and verify can be found here if interested:
http://kbentley.dyndns.org/data/flashrom-output
The flash chip MX25L3205, the chipset is an Intel ICH9.
Kyle Bentley
- ---------------------- Kyle Bentley kwbent@uab.edu UAB Dept of Physics 1300 University Blvd Birmingham, AL - ----------------------
On Sun, 27 Oct 2013 16:10:10 -0500 Kyle Bentley kwbent@uab.edu wrote:
I can confirm that the Suprmicro X7SPA-H board can be safely flashed using flashrom.
Hello Kyle,
thanks for your report! I have added your board to our list of supported hardware and will commit that later together with other small changes.
A similar board is listed in the wiki, but for the sake of completeness add this one as well. The full verbose flash and verify can be found here if interested:
Yes, it is important to look at the log because it is sometimes misinterpreted (namely when everything was skipped without warning).