[commit] r1530 - trunk

[repository service]

Author: mkarcher
Date: Sat May  5 22:53:59 2012
New Revision: 1530
URL: http://flashrom.org/trac/flashrom/changeset/1530

Log:
Add manpage entry for pony_spi

Signed-off-by: Michael Karcher 
Acked-by: Carl-Daniel Hailfinger

Modified:
   trunk/flashrom.8

Modified: trunk/flashrom.8
==============================================================================
--- trunk/flashrom.8	Sat May  5 22:43:42 2012	(r1529)
+++ trunk/flashrom.8	Sat May  5 22:53:59 2012	(r1530)
@@ -201,6 +201,9 @@
 .BR "* rayer_spi" " (for SPI flash ROMs attached to a RayeR parport "
 or Xilinx DLC5 compatible cable)
 .sp
+.BR "* pony_spi" " (for SPI flash ROMs attached to a SI-Prog serial port "
+bitbanging adapter)
+.sp
 .BR "* nicintel_spi" " (for SPI flash ROMs on Intel Gigabit network cards)"
 .sp
 .BR "* ogp_spi" " (for SPI flash ROMs on Open Graphics Project graphics card)"
@@ -614,6 +617,26 @@
 The schematic of the Xilinx DLC 5 was published at
 .BR "http://www.xilinx.com/itp/xilinx4/data/docs/pac/appendixb.html " .
 .SS
+.BR "pony_spi " programmer
+The serial port (like /dev/ttyS0, /dev/ttyUSB0 on Linux or COM3 on windows) is
+specified using the mandatory
+.B dev 
+parameter. The adapter type is selectable between SI-Prog (used for
+SPI devices with PonyProg 2000) or a custom made serial bitbanging programmer
+named "serbang". The optional
+.B type 
+parameter accepts the values "si_prog" (default) or "serbang".
+.sp
+Information about the SI-Prog adapter can be found at
+.BR "http://www.lancos.com/siprogsch.html " .
+.sp
+An example call to flashrom is
+.sp
+.B "  flashrom -p pony_spi:dev=/dev/ttyS0,type=serbang"
+.sp
+Please note that while USB-to-serial adapters work under certain circumstances,
+this slows down operation considerably.
+.SS
 .BR "ogp_spi " programmer
 The flash ROM chip to access must be specified with the
 .B rom