how dump FL128SAIH30, manufactured by Alvarion Technologies

[beba beba]

i probly like 
_030221_1_MHZ.bin -c S25FL128S......1
flashrom v1.0 on Linux 4.4.71+ (armv7l)
flashrom is free software, get the source code at https://flashrom.org

flashrom was built with libpci 3.5.2, GCC 6.3.0 20170516, little endian
Command line (9 args): ./flashrom -p linux_spi:dev=/dev/spidev2.0,spispeed=1000 -V -o FILE_030221_1MHZ.log -r FLASH_CI_modul_030221_1_MHZ.bin -c S25FL128S......1
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Initializing linux_spi programmer
Using device /dev/spidev2.0
Using 1000 kHz clock
The following protocols are supported: SPI.
Probing for Spansion S25FL128S......1, 16384 kB: probe_spi_rdid_generic: id1 0x01, id2 0x2018
Found Spansion flash chip "S25FL128S......1" (16384 kB, SPI) on linux_spi.
Chip status register is 0x00.
Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set
Chip status register: Program Fail Flag (P_FAIL) is not set
Chip status register: Erase Fail Flag (E_FAIL) is not set
Chip status register: Block Protect 2 (BP2) is not set
Chip status register: Block Protect 1 (BP1) is not set
Chip status register: Block Protect 0 (BP0) is not set
Chip status register: Write Enable Latch (WEL) is not set
Chip status register: Write In Progress (WIP/BUSY) is not set
This chip may contain one-time programmable memory. flashrom cannot read
and may never be able to write it, hence it may not be able to completely
clone the contents of this chip (see man page for details).
===
This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to [e-mail] if any of the above operations
work correctly for you with this flash chip. Please include the flashrom log
file for all operations you tested (see the man page for details), and mention
which mainboard or programmer you tested in the subject line.
Thanks for your help!
Reading flash... done.
linaro@tinkerboard:~/flashrom_ci_modul$

[Mike Banon]

Looking at "Reading flash... done.", I think you've dumped it successfully

On Thu, Feb 4, 2021 at 5:02 PM beba beba via flashrom
 wrote:
> i probly like
> _030221_1_MHZ.bin -c S25FL128S......1
> flashrom v1.0 on Linux 4.4.71+ (armv7l)
> flashrom is free software, get the source code at https://flashrom.org
>
> flashrom was built with libpci 3.5.2, GCC 6.3.0 20170516, little endian
> Command line (9 args): ./flashrom -p linux_spi:dev=/dev/spidev2.0,spispeed=1000 -V -o FILE_030221_1MHZ.log -r FLASH_CI_modul_030221_1_MHZ.bin -c S25FL128S......1
> Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
> Initializing linux_spi programmer
> Using device /dev/spidev2.0
> Using 1000 kHz clock
> The following protocols are supported: SPI.
> Probing for Spansion S25FL128S......1, 16384 kB: probe_spi_rdid_generic: id1 0x01, id2 0x2018
> Found Spansion flash chip "S25FL128S......1" (16384 kB, SPI) on linux_spi.
> Chip status register is 0x00.
> Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set
> Chip status register: Program Fail Flag (P_FAIL) is not set
> Chip status register: Erase Fail Flag (E_FAIL) is not set
> Chip status register: Block Protect 2 (BP2) is not set
> Chip status register: Block Protect 1 (BP1) is not set
> Chip status register: Block Protect 0 (BP0) is not set
> Chip status register: Write Enable Latch (WEL) is not set
> Chip status register: Write In Progress (WIP/BUSY) is not set
> This chip may contain one-time programmable memory. flashrom cannot read
> and may never be able to write it, hence it may not be able to completely
> clone the contents of this chip (see man page for details).
> ===
> This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
> The test status of this chip may have been updated in the latest development
> version of flashrom. If you are running the latest development version,
> please email a report to [e-mail] if any of the above operations
> work correctly for you with this flash chip. Please include the flashrom log
> file for all operations you tested (see the man page for details), and mention
> which mainboard or programmer you tested in the subject line.
> Thanks for your help!
> Reading flash... done.
> linaro@tinkerboard:~/flashrom_ci_modul$
>
> flashrom mailing list -- [e-mail]
> To unsubscribe send an email to [e-mail]