Tyan S2875 (Tiger K8W)

[Brian Scipioni]

Dear all,

You may add the Tyan S2875 (Tiger K8W) main board BIOS to the list of "known to 
be working".
Whew, although it wasn't really that much of a gamble.

The updated BIOS installed was the AMI 2875V304.ROM available from Tyan.

thanks for the very good software - I never used flashrom before and it was 
clear what to do.

Brian Scipioni

[Stefan Tauner]

On Tue, 13 Mar 2012 07:09:51 -0700 (PDT)
Brian Scipioni  wrote:
> Dear all,
>
> You may add the Tyan S2875 (Tiger K8W) main board BIOS to the list of "known to 
> be working".
> Whew, although it wasn't really that much of a gamble.
>
> The updated BIOS installed was the AMI 2875V304.ROM available from Tyan.
>
> thanks for the very good software - I never used flashrom before and it was 
> clear what to do.
>
> Brian Scipioni

Hello Brian,

thanks for your report!
I have added the board as you suggested and will commit that later
together with other small changes. If it is not too much of a hassle
please send us the output of flashrom -V too for documentation purposes.

[Brian L Scipioni]

Stefan,

Attached - as requested.

And thank you all - I was about to go through the whole DOS boot/drive
thing when I came across flashrom.  I couldn't believe it at first that
I could flash my bios in linux "live" and verify it.

brian

On Wed, 2012-03-14 at 00:05 +0100, Stefan Tauner wrote:
> On Tue, 13 Mar 2012 07:09:51 -0700 (PDT)
> Brian Scipioni  wrote:
> > Dear all,
> >
> > You may add the Tyan S2875 (Tiger K8W) main board BIOS to the list of "known to 
> > be working".
> > Whew, although it wasn't really that much of a gamble.
> >
> > The updated BIOS installed was the AMI 2875V304.ROM available from Tyan.
> >
> > thanks for the very good software - I never used flashrom before and it was 
> > clear what to do.
> >
> > Brian Scipioni
>
> Hello Brian,
>
> thanks for your report!
> I have added the board as you suggested and will commit that later
> together with other small changes. If it is not too much of a hassle
> please send us the output of flashrom -V too for documentation purposes.