Report: Packard EasyNote TK85 V1.30 read

flashrom v0.9.7-r1711 on Darwin 12.4.0 (x86_64)
flashrom is free software, get the source code at http://www.flashrom.org

flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian
Command line (5 args): ~/Downloads/DPCIManager_Lion/DPCIManager.app/Contents/MacOS/flashrom -VV -r /var/folders/96/jvhsf_cs4210g2fq3n3yz0nm0000gn/T/DPCIeiIeMu.rom -p internal
Calibrating delay loop... OS timer resolution is 1 usecs, 323M loops per second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 1020 us, 10000 myus = 10047 us, 4 myus = 4 us, OK.
Initializing internal programmer
Mapping low megabyte at 0x0000000000000400, unaligned size 0xffc00.
Mapping low megabyte, 0xffc00 bytes at unaligned 0x0000000000000400.
No coreboot table found.
DMI string system-manufacturer: "Packard Bell"
DMI string system-product-name: "EasyNote TK85"
DMI string system-version: "V1.30"
DMI string baseboard-manufacturer: "Packard Bell"
DMI string baseboard-product-name: "EasyNote TK85"
DMI string baseboard-version: "V1.30"
DMI string chassis-type: "Notebook"
Laptop detected via DMI.
========================================================================
WARNING! You seem to be running flashrom on an unsupported laptop.
Laptops, notebooks and netbooks are difficult to support and we
recommend to use the vendor flashing utility. The embedded controller
(EC) in these machines often interacts badly with flashing.
See the manpage and http://www.flashrom.org/Laptops for details.

If flash is shared with the EC, erase is guaranteed to brick your laptop
and write may brick your laptop.
Read and probe may irritate your EC and cause fan failure, backlight
failure and sudden poweroff.
You have been warned.
========================================================================
Aborting.
Error: Programmer initialization failed.