Any reason for this? Any guidance will be greatly appreciated.
On Fri, May 21, 2021 at 4:33 PM Hermann Thomas A. Calero < hermanncalero@gmail.com> wrote:
Hello,
I tried to change the flash chip of my old Toshiba satellite pro a50 a series with previous bios chip Winbond 25Q64CVSIG with a new Winbond 25Q64FWSIG and i am getting the error "No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Apparently at least some data has changed. Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org, thanks!"
Error screenshot here https://prnt.sc/138oacnand below.
[image: image.png] Hope you can enlighten me on this as i have used the latest flashrom version. Thank you!
Are you sure that your (ISP? in-system programming) flashing set up is reliable? Short enough wires, etc.
On Sat, May 29, 2021 at 12:36 AM Hermann Thomas A. Calero < hermanncalero@gmail.com> wrote:
Any reason for this? Any guidance will be greatly appreciated.
On Fri, May 21, 2021 at 4:33 PM Hermann Thomas A. Calero < hermanncalero@gmail.com> wrote:
Hello,
I tried to change the flash chip of my old Toshiba satellite pro a50 a series with previous bios chip Winbond 25Q64CVSIG with a new Winbond 25Q64FWSIG and i am getting the error "No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Apparently at least some data has changed. Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org, thanks!"
Error screenshot here https://prnt.sc/138oacnand below.
[image: image.png] Hope you can enlighten me on this as i have used the latest flashrom version. Thank you!
flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-leave@flashrom.org
-
Hermann Thomas A. Calero -
Mike Banon