Confirmed working devices, Intel 82599ES - Hewlett-Packard Company Ethernet 10Gb 2-port 560SFP+ Adapter

[Tom Eichhorn]

Hi,

flashrom works like a charm on the device mentioned in the subject:

root@cbk130544:~# flashrom -p nicintel_spi:pci=05:00.0
flashrom v0.9.8-r1888 on Linux 4.4.0-2-generic (x86_64)
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OK.
===
This PCI device is UNTESTED. Please report the 'flashrom -p xxxx' output
to [e-mail] if it works for you. Please add the name of your
PCI device to the subject. Thank you for your help!
===
Found Atmel flash chip "AT25DF041A" (512 kB, SPI) on nicintel_spi.
No operations were specified.

There is also a variant with a different flash chips, which works fine:

root@cbk130644:~# sudo flashrom -p nicintel_spi:pci=05:00.0
flashrom v0.9.8-r1888 on Linux 4.4.0-2-generic (x86_64)
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OK.
===
This PCI device is UNTESTED. Please report the 'flashrom -p xxxx' output
to [e-mail] if it works for you. Please add the name of your
PCI device to the subject. Thank you for your help!
===
Found SST flash chip "SST25VF040B" (512 kB, SPI) on nicintel_spi.
Found SST flash chip "SST25VF040B.REMS" (512 kB, SPI) on nicintel_spi.
Multiple flash chip definitions match the detected chip(s): "SST25VF040B", "SST25VF040B.REMS"
Please specify which chip definition to use with the -c <chipname> option.

Thanks for the great work!
Tom
--
SysEleven GmbH
Umspannwerk - Aufgang C
Ohlauer Straße 43
10999 Berlin

Tel [phone]
Fax [phone]

http://www.syseleven.de
http://www.facebook.com/SysEleven

Firmensitz: Berlin
Registergericht: AG Berlin Charlottenburg, HRB 108571 B
Geschäftsführer: Marc Korthaus, Jens Ihlenfeld

Confirmed working devices, Intel 82599ES - Hewlett-Packard Company Ethernet 10Gb 2-port 560SFP+ Adapter

[Stefan Tauner]

On Wed, 10 Feb 2016 09:45:21 +0100
Tom Eichhorn  wrote:
> Hi,
>
> flashrom works like a charm on the device mentioned in the subject:
>
> root@cbk130544:~# flashrom -p nicintel_spi:pci=05:00.0
> flashrom v0.9.8-r1888 on Linux 4.4.0-2-generic (x86_64)
> flashrom is free software, get the source code at http://www.flashrom.org
> Calibrating delay loop... OK.
>
> This PCI device is UNTESTED. Please report the 'flashrom -p xxxx' output
> to [e-mail] if it works for you. Please add the name of your
> PCI device to the subject. Thank you for your help!
> ===
> Found Atmel flash chip "AT25DF041A" (512 kB, SPI) on nicintel_spi.
> No operations were specified.
>
> There is also a variant with a different flash chips, which works fine:
>
> root@cbk130644:~# sudo flashrom -p nicintel_spi:pci=05:00.0
> flashrom v0.9.8-r1888 on Linux 4.4.0-2-generic (x86_64)
> flashrom is free software, get the source code at http://www.flashrom.org
> Calibrating delay loop... OK.
>
> This PCI device is UNTESTED. Please report the 'flashrom -p xxxx' output
> to [e-mail] if it works for you. Please add the name of your
> PCI device to the subject. Thank you for your help!
> ===
> Found SST flash chip "SST25VF040B" (512 kB, SPI) on nicintel_spi.
> Found SST flash chip "SST25VF040B.REMS" (512 kB, SPI) on nicintel_spi.
> Multiple flash chip definitions match the detected chip(s): "SST25VF040B", "SST25VF040B.REMS"
> Please specify which chip definition to use with the -c <chipname> option.

Hello Tom,

unfortunately we did not print out the PCI device IDs in the messages
above. I would like to tag the device ID in flashrom that was
specifically tested by you but the description you gave is not uniquely
identifying any of the supported devices. Can you please run lspci -nn
and post the device ID? I am pretty sure it is a 10fb (hex).

Also, when you say "works" fine - especially in the second case of the
SST25VF040B - do you mean that writing the chip works as well? In that
case, a verbose write log is always appreciated (in future reports).