[PATCH] Board enable for ASRock 775i65G

[Joshua Roys]

Hello,

Patch is attached.

Josh

[Uwe Hermann]

On Thu, Aug 05, 2010 at 05:49:16PM -0400, Joshua Roys wrote:
> > From 18f1bec78ae7a2dfac47e0e6035f9c47a944a328 Mon Sep 17 00:00:00 2001
>
> From: Joshua Roys 
> Date: Thu, 5 Aug 2010 17:43:59 -0400
> Subject: [PATCH] Board enable for ASRock 775i65G
>
> Thanks to Michael Karcher for finding the board enable.
>
> Signed-off-by: Joshua Roys

Thanks, r1133. I added more info in the comment and also added the
vendor URL for the board, so it shows up in the wiki / -L output.

Uwe.

[Kai Hauser]

ITD - Hauser

Bismarckstraße 26
67454 Haßloch
Deutschland

Tel: [phone]
Fax: [phone]
Mail: [e-mail]
http://www.itd-hauser.de

Geschäftsführer/CEO: Kai Hauser
USt-ID-Nr: DE-247965431

Am 05.08.2010 23:49, schrieb Joshua Roys:
> Hello,
>
> Patch is attached.
>
> Josh

[Uwe Hermann]

Hi,

thanks for your report!

On Fri, Aug 13, 2010 at 04:08:33PM +0200, Kai Hauser wrote:
> flashrom v0.9.2-r1130 on Linux 2.6.18-6-686 (i686), built with libpci 2.2.4-pre4, GCC 4.1.2 20061115 (prerelease) (Debian 4.1.1-21), little endian

[...]
> WARNING: Your mainboard is ASRock 775i65G, but the mainboard-specific
> code has not been tested, and thus will not not be executed by default.
> Depending on your hardware environment, erasing, writing or even probing
> can fail without running the board specific code.

This message should go away if you use a flashrom version newer than
r1133 I think.

Uwe.