Author: stefanct Date: Thu Feb 18 22:42:15 2016 New Revision: 1927 URL: http://flashrom.org/trac/flashrom/changeset/1927
Log: dediprog: add support for SF600.
This patch is based on a number of changes by David Woodhouse and David Hendricks.
SF600 uses two bulk endpoints, 1 for out and 2 for in unlike the SF100 that uses only a single one. This patch make endpoint usage more explicit and sets the in/out endpoint(s) appropriately for SF100 and SF600.
Also, change all SF100-specific strings in messages and leave standalone mode on SF600s.
Signed-off-by: David Woodhouse David.Woodhouse@intel.com Signed-off-by: David Hendricks dhendrix@chromium.org Signed-off-by: Stefan Tauner stefan.tauner@alumni.tuwien.ac.at Acked-by: Stefan Tauner stefan.tauner@alumni.tuwien.ac.at
Modified: trunk/dediprog.c
Modified: trunk/dediprog.c ============================================================================== --- trunk/dediprog.c Wed Feb 17 23:25:12 2016 (r1926) +++ trunk/dediprog.c Thu Feb 18 22:42:15 2016 (r1927) @@ -45,7 +45,14 @@ #define REQTYPE_EP_OUT (USB_ENDPOINT_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT) /* 0x42 */ #define REQTYPE_EP_IN (USB_ENDPOINT_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT) /* 0xC2 */ static usb_dev_handle *dediprog_handle; -static int dediprog_endpoint; +static int dediprog_in_endpoint; +static int dediprog_out_endpoint; + +enum dediprog_devtype { + DEV_UNKNOWN = 0, + DEV_SF100 = 100, + DEV_SF600 = 600, +};
enum dediprog_leds { LED_INVALID = -1, @@ -127,16 +134,26 @@ WRITE_MODE_4B_ADDR_256B_PAGE_PGM_FLAGS = 12, };
+enum dediprog_standalone_mode { + ENTER_STANDALONE_MODE = 0, + LEAVE_STANDALONE_MODE = 1, +}; +
static int dediprog_firmwareversion = FIRMWARE_VERSION(0, 0, 0); +enum dediprog_devtype dediprog_devicetype = DEV_UNKNOWN;
/* Returns true if firmware (and thus hardware) supports the "new" protocol */ static bool is_new_prot(void) { - /* if (SF100) */ - return dediprog_firmwareversion >= FIRMWARE_VERSION(5, 5, 0); - /* else if (SF600) - return dediprog_firmwareversion >= FIRMWARE_VERSION(6, 9, 0); */ + switch (dediprog_devicetype) { + case DEV_SF100: + return dediprog_firmwareversion >= FIRMWARE_VERSION(5, 5, 0); + case DEV_SF600: + return dediprog_firmwareversion >= FIRMWARE_VERSION(6, 9, 0); + default: + return 0; + } }
static int dediprog_read(enum dediprog_cmds cmd, unsigned int value, unsigned int idx, uint8_t *bytes, size_t size) @@ -340,7 +357,7 @@
unsigned int i; for (i = 0; i < count; i++) { - ret = usb_bulk_read(dediprog_handle, 0x80 | dediprog_endpoint, + ret = usb_bulk_read(dediprog_handle, 0x80 | dediprog_in_endpoint, (char *)buf + i * chunksize, chunksize, DEFAULT_TIMEOUT); if (ret != chunksize) { @@ -447,7 +464,7 @@ char usbbuf[512]; memcpy(usbbuf, buf + i * chunksize, chunksize); memset(usbbuf + chunksize, 0xff, sizeof(usbbuf) - chunksize); // fill up with 0xFF - ret = usb_bulk_write(dediprog_handle, dediprog_endpoint, usbbuf, 512, DEFAULT_TIMEOUT); + ret = usb_bulk_write(dediprog_handle, dediprog_out_endpoint, usbbuf, 512, DEFAULT_TIMEOUT); if (ret != 512) { msg_perr("SPI bulk write failed, expected %i, got %i %s!\n", 512, ret, usb_strerror()); return 1; @@ -575,7 +592,6 @@ static int dediprog_check_devicestring(void) { int ret; - int fw[3]; char buf[0x11];
/* Command Receive Device String. */ @@ -586,16 +602,24 @@ } buf[0x10] = '\0'; msg_pdbg("Found a %s\n", buf); - if (memcmp(buf, "SF100", 0x5) != 0) { - msg_perr("Device not a SF100!\n"); + if (memcmp(buf, "SF100", 0x5) == 0) + dediprog_devicetype = DEV_SF100; + else if (memcmp(buf, "SF600", 0x5) == 0) + dediprog_devicetype = DEV_SF600; + else { + msg_perr("Device not a SF100 or SF600!\n"); return 1; } - if (sscanf(buf, "SF100 V:%d.%d.%d ", &fw[0], &fw[1], &fw[2]) != 3) { + + int sfnum; + int fw[3]; + if (sscanf(buf, "SF%d V:%d.%d.%d ", &sfnum, &fw[0], &fw[1], &fw[2]) != 4 || + sfnum != dediprog_devicetype) { msg_perr("Unexpected firmware version string '%s'\n", buf); return 1; } /* Only these major versions were tested. */ - if (fw[0] < 2 || fw[0] > 6) { + if (fw[0] < 2 || fw[0] > 7) { msg_perr("Unexpected firmware version %d.%d.%d!\n", fw[0], fw[1], fw[2]); return 1; } @@ -623,6 +647,23 @@ return 0; }
+static int dediprog_standalone_mode(void) +{ + int ret; + + if (dediprog_devicetype != DEV_SF600) + return 0; + + msg_pdbg2("Disabling standalone mode.\n"); + ret = dediprog_write(CMD_SET_STANDALONE, LEAVE_STANDALONE_MODE, 0, NULL, 0); + if (ret) { + msg_perr("Failed to disable standalone mode: %s\n", usb_strerror()); + return 1; + } + + return 0; +} + #if 0 /* Something. * Present in eng_detect_blink.log with firmware 3.1.8 @@ -737,6 +778,7 @@ static int dediprog_shutdown(void *data) { dediprog_firmwareversion = FIRMWARE_VERSION(0, 0, 0); + dediprog_devicetype = DEV_UNKNOWN;
/* URB 28. Command Set SPI Voltage to 0. */ if (dediprog_set_spi_voltage(0x0)) @@ -849,7 +891,7 @@ dev->descriptor.idVendor, dev->descriptor.idProduct); dediprog_handle = usb_open(dev); if (!dediprog_handle) { - msg_perr("Could not open USB device: %s\n", usb_strerror()); + msg_perr("Could not find a Dediprog programmer on USB: %s\n", usb_strerror()); return 1; } ret = usb_set_configuration(dediprog_handle, 1); @@ -868,7 +910,6 @@ msg_perr("Could not close USB device!\n"); return 1; } - dediprog_endpoint = 2;
if (register_shutdown(dediprog_shutdown, NULL)) return 1; @@ -879,6 +920,13 @@ if (dediprog_check_devicestring()) return 1;
+ /* SF100 only has 1 endpoint for in/out, SF600 uses two separate endpoints instead. */ + dediprog_in_endpoint = 2; + if (dediprog_devicetype == DEV_SF100) + dediprog_out_endpoint = 2; + else + dediprog_out_endpoint = 1; + /* Set all possible LEDs as soon as possible to indicate activity. * Because knowing the firmware version is required to set the LEDs correctly we need to this after * dediprog_check_devicestring() has queried the device and set dediprog_firmwareversion. */ @@ -892,6 +940,9 @@ return 1; }
+ if (dediprog_standalone_mode()) + return 1; + if (register_spi_master(&spi_master_dediprog) || dediprog_set_leds(LED_NONE)) return 1;
-
repository service