Hi Mark,
On 21.10.2015 16:18, Rowlinson Mark wrote:
I have a 32bit touch screen device running CentOS 5.2 which has some of its BIOS settings accessible in /dev/nvram and others elsewhere else (that's why I've been loooking at flashrom). I have tried later distributions (CentOS 6.7 and the System Rescue CD) and they both report the following: [root@server ~]# /var/tmp/flashrom-0.9.8/flashrom -p internal flashrom v0.9.8-r1888 on Linux 2.6.32-573.el6.i686 (i686) [...] WARNING: No chipset found. Flash detection will most likely fail. No EEPROM/flash device found.
It seems we have to add some PCI IDs to our southbridge table.
Do you have an exact name of the machine in question?
What information is needed to identify the chipset in use so support can be added for these devices?
(as root) lspci -nnvvvxxx
That should be sufficient for us to find out the southbridge and some of its settings.
Regards, Carl-Daniel
Hi Carl-Daniel,
Thanks for the swift response, I have attached output from the command requested.
The device in question is an IBM (now Toshiba) AnyPlace Kiosk Model 4838-310. The models we have are a mixture of 4838-310 and 4838-330 and support documentation refers to them as 4838-3xx.
Best Regards, Mark Rowlinson
-----Original Message----- From: Carl-Daniel Hailfinger [mailto:c-d.hailfinger.devel.2006@gmx.net] Sent: 22 October 2015 07:07 To: Rowlinson Mark Mark.Rowlinson@uk.fujitsu.com; flashrom@flashrom.org Subject: Re: [flashrom] Flash chip/chipset not found
Hi Mark,
On 21.10.2015 16:18, Rowlinson Mark wrote:
I have a 32bit touch screen device running CentOS 5.2 which has some of its BIOS settings accessible in /dev/nvram and others elsewhere else (that's why I've been loooking at flashrom). I have tried later distributions (CentOS 6.7 and the System Rescue CD) and they both report the following: [root@server ~]# /var/tmp/flashrom-0.9.8/flashrom -p internal flashrom v0.9.8-r1888 on Linux 2.6.32-573.el6.i686 (i686) [...] WARNING: No chipset found. Flash detection will most likely fail. No EEPROM/flash device found.
It seems we have to add some PCI IDs to our southbridge table.
Do you have an exact name of the machine in question?
What information is needed to identify the chipset in use so support can be added for these devices?
(as root) lspci -nnvvvxxx
That should be sufficient for us to find out the southbridge and some of its settings.
Regards, Carl-Daniel
Unless otherwise stated, this email has been sent from Fujitsu Services Limited, from Fujitsu (FTS) Limited, or from Fujitsu Telecommunications Europe Limited, together "Fujitsu".
This email is only for the use of its intended recipient. Its contents are subject to a duty of confidence and may be privileged. Fujitsu does not guarantee that this email has not been intercepted and amended or that it is virus-free.
Fujitsu Services Limited, registered in England No 96056, registered office 22 Baker Street, London W1U 3BW.
Fujitsu (FTS) Limited, registered in England No 03808613, registered office 22 Baker Street, London W1U 3BW.
PFU Imaging Solutions Europe Limited, registered in England No 1578652, registered office Hayes Park Central, Hayes End Road, Hayes, Middlesex, UB4 8FE.
Fujitsu Telecommunications Europe Limited, registered in England No 2548187, registered office Solihull Parkway, Birmingham Business Park, Birmingham, B37 7YU.