The flashing setup seems to work fine with any other chip. The chip in question is a Winbond 25Q128FWPF. This chip is on the Dell 3100 and HP 11 G6 EE chromebooks and is the only chip we've had an issue with so far. I attached an image of the chip itself, in case there is any other info on there you need. I don't see this chip on the supported hardware, so maybe it is not yet supported?
Thank you for any help
On Mon, May 17, 2021 at 1:17 PM Mike Banon email@example.com wrote:
Are you doing the ISP (In-System Programming) ? Maybe there are problems with the reliability of your flashing setup (i.e. too long wires between a programmer and test clip)
On Thu, May 13, 2021 at 2:39 AM Tim Tech firstname.lastname@example.org wrote:
Are you able to help with the following issue? Thank you
Calibrating delay loop... OK. Found Winbond flash chip "unknown Winbond (ex Nexcom) SPI chip" (0 kB,
SPI) on ch341a_spi.
This flash part has status NOT WORKING for operations: PROBE READ ERASE
The test status of this chip may have been updated in the latest
version of flashrom. If you are running the latest development version, please email a report to email@example.com if any of the above
work correctly for you with this flash chip. Please include the flashrom
file for all operations you tested (see the man page for details), and
which mainboard or programmer you tested in the subject line. Thanks for your help! Read is not working on this chip. Aborting. _______________________________________________ flashrom mailing list -- firstname.lastname@example.org To unsubscribe send an email to email@example.com
-- Best regards, Mike Banon Open Source Community Manager of 3mdeb - https://3mdeb.com/