---------- Forwarded message ---------
From:
Tim Tech <agitimtim@gmail.com>Date: Thu, May 20, 2021 at 12:07 PM
Subject: Re: [flashrom] Dell 3100 Chromebook
To: Mike Banon <
mikebdp2@gmail.com>
The flashing setup seems to work fine with any other chip. The chip in question is a Winbond 25Q128FWPF. This chip is on the Dell 3100 and HP 11 G6 EE chromebooks and is the only chip we've had an issue with so far. I attached an image of the chip itself, in case there is any other info on there you need. I don't see this chip on the supported hardware, so maybe it is not yet supported?
Thank you for any help
Tim
Are you doing the ISP (In-System Programming) ? Maybe there are
problems with the reliability of your flashing setup (i.e. too long
wires between a programmer and test clip)
On Thu, May 13, 2021 at 2:39 AM Tim Tech <agitimtim@gmail.com> wrote:
>
> Are you able to help with the following issue? Thank you
>
> Calibrating delay loop... OK.
> Found Winbond flash chip "unknown Winbond (ex Nexcom) SPI chip" (0 kB, SPI) on ch341a_spi.
>
> This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE
> The test status of this chip may have been updated in the latest development
> version of flashrom. If you are running the latest development version,
> please email a report to flashrom@flashrom.org if any of the above operations
> work correctly for you with this flash chip. Please include the flashrom log
> file for all operations you tested (see the man page for details), and mention
> which mainboard or programmer you tested in the subject line.
> Thanks for your help!
> Read is not working on this chip. Aborting.
> _______________________________________________
> flashrom mailing list -- flashrom@flashrom.org
> To unsubscribe send an email to flashrom-leave@flashrom.org
--
Best regards, Mike Banon
Open Source Community Manager of 3mdeb - https://3mdeb.com/