Re: [flashrom] Report: Intel QM67 - Tested OK

[Stefan Tauner]

On Wed, 11 Dec 2013 07:55:06 +0100
omr Obermair Thomas  wrote:
> flashrom v0.9.7-r1711 on Linux 3.2.51-keba0-rt72 (i686)
> flashrom is free software, get the source code at http://www.flashrom.org
>
> flashrom was built with libpci 3.1.7, GCC 4.4.5, little endian
> Command line (11 args): ./flashrom_eg -p internal -c MX25L6406E/MX25L6436E -l bios.layout -i bios -w EXHR0202_8MB.rom -V
> romlayout 00000000 - 005fffff named me
> romlayout 00600000 - 007fffff named bios
> Using region: "bios".
> Calibrating delay loop... OS timer resolution is 1 usecs, 2092M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1002 us, 10000 myus = 10001 us, 4 myus = 5 us, OK.
> Initializing internal programmer
> No coreboot table found.
> DMI string system-manufacturer: "ADLINK Technology Inc."
> DMI string system-product-name: "Express-HR"
> DMI string system-version: "72120-0B10-4060"
> DMI string baseboard-manufacturer: "To be filled by O.E.M."
> DMI string baseboard-product-name: "To be filled by O.E.M."
> DMI string baseboard-version: "To be filled by O.E.M."
> DMI string chassis-type: "Desktop"
> Found chipset "Intel QM67" with PCI ID 8086:1c4f.
> This chipset is marked as untested. If you are using an up-to-date version
> of flashrom *and* were (not) able to successfully update your firmware with it,
> then please email a report to [e-mail] including a verbose (-V) log.
> […]

Hello Thomas,

thanks for your report!
I have added your chipset *and* your board to our list of supported
hardware and will commit that later together with other small changes.