Hi, as said in flashrom's output I'm mailing you. Can you help me to get the Q57 flashing? The current firmware is the original Asus/AMI BIOS 1202 [1].
Regards, Bastian
flashrom v0.9.9-r1955 on Linux 4.10.6-1-ARCH (x86_64) flashrom is free software, get the source code at https://flashrom.org
flashrom was built with libpci 3.4.1, GCC 5.3.0, little endian Command line (3 args): flashrom -p internal -V Calibrating delay loop... OS timer resolution is 1 usecs, 1594M loops per second, 10 myus = 10 us, 100 myus = 107 us, 1000 myus = 1015 us, 10000 myus = 9982 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. Using Internal DMI decoder. DMI string chassis-type: "Desktop" DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P7Q57-M DO" DMI string baseboard-version: "Rev x.0x" Found chipset "Intel Q57" with PCI ID 8086:3b0a. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom@flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... Root Complex Register Block address = 0xfed1c000 Error accessing ICH RCRB, 0x4000 bytes at 0x00000000fed1c000 /dev/mem mmap failed: Operation not permitted FAILED! FATAL ERROR! Error: Programmer initialization failed.
[1] http://dlcdnet.asus.com/pub/ASUS/mb/LGA1156/P7Q57-M_DO/P7Q57-M-DO-ASUS-1202....
-
Bastian Germann