This adds support for the following chips: - AT25F512, AT25F512A, AT25F512B - AT25F1024, AT25F1024A - AT25F2048 - AT25F4096
Besides the definitions of the the chips in flashchips.c this includes - a dedicated probing method (probe_spi_at25f) - pretty printing methods (spi_prettyprint_status_register_at25f*), and - unlocking methods (spi_disable_blockprotect_at25f*)
Signed-off-by: Stefan Tauner stefan.tauner@student.tuwien.ac.at --- chipdrivers.h | 7 +++ flashchips.c | 148 +++++++++++++++++++++++++++++++++++++++++++++++++++++ flashchips.h | 11 ++-- spi.h | 8 +-- spi25.c | 22 ++++++++ spi25_statusreg.c | 64 +++++++++++++++++++++++ 6 files changed, 250 insertions(+), 10 deletions(-)
diff --git a/chipdrivers.h b/chipdrivers.h index db153cd..2a12973 100644 --- a/chipdrivers.h +++ b/chipdrivers.h @@ -38,6 +38,7 @@ int probe_spi_rdid4(struct flashctx *flash); int probe_spi_rems(struct flashctx *flash); int probe_spi_res1(struct flashctx *flash); int probe_spi_res2(struct flashctx *flash); +int probe_spi_at25f(struct flashctx *flash); int spi_write_enable(struct flashctx *flash); int spi_write_disable(struct flashctx *flash); int spi_block_erase_20(struct flashctx *flash, unsigned int addr, unsigned int blocklen); @@ -66,13 +67,19 @@ int spi_prettyprint_status_register_amic_a25l40p(struct flashctx *flash); int spi_prettyprint_status_register_amic_a25l032(struct flashctx *flash); int spi_prettyprint_status_register_at25df(struct flashctx *flash); int spi_prettyprint_status_register_at25df_sec(struct flashctx *flash); +int spi_prettyprint_status_register_at25f(struct flashctx *flash); +int spi_prettyprint_status_register_at25f512a(struct flashctx *flash); int spi_prettyprint_status_register_at25f512b(struct flashctx *flash); +int spi_prettyprint_status_register_at25f4096(struct flashctx *flash); int spi_prettyprint_status_register_at25fs010(struct flashctx *flash); int spi_prettyprint_status_register_at25fs040(struct flashctx *flash); int spi_prettyprint_status_register_at26df081a(struct flashctx *flash); int spi_disable_blockprotect_at25df(struct flashctx *flash); int spi_disable_blockprotect_at25df_sec(struct flashctx *flash); +int spi_disable_blockprotect_at25f(struct flashctx *flash); +int spi_disable_blockprotect_at25f512a(struct flashctx *flash); int spi_disable_blockprotect_at25f512b(struct flashctx *flash); +int spi_disable_blockprotect_at25f4096(struct flashctx *flash); int spi_disable_blockprotect_at25fs010(struct flashctx *flash); int spi_disable_blockprotect_at25fs040(struct flashctx *flash); int spi_prettyprint_status_register_s33(struct flashctx *flash); diff --git a/flashchips.c b/flashchips.c index 30377f9..33522fb 100644 --- a/flashchips.c +++ b/flashchips.c @@ -1667,6 +1667,65 @@ const struct flashchip flashchips[] = {
{ .vendor = "Atmel", + .name = "AT25F512", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25F512, + .total_size = 64, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_at25f, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_62, + } + }, + .printlock = spi_prettyprint_status_register_at25f, + .unlock = spi_disable_blockprotect_at25f, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT25F512A", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25F512A, + .total_size = 64, + .page_size = 128, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_at25f, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_62, + } + }, + .printlock = spi_prettyprint_status_register_at25f512a, + /* FIXME: It is not correct to use this one, because the BP1 bit is N/A. */ + .unlock = spi_disable_blockprotect_at25f512a, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", .name = "AT25F512B", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, @@ -1709,6 +1768,95 @@ const struct flashchip flashchips[] = {
{ .vendor = "Atmel", + /* The A suffix indicates 33MHz instead of 20MHz clock rate. + * All other properties seem to be the same.*/ + .name = "AT25F1024(A)", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25F1024, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_at25f, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_62, + } + }, + .printlock = spi_prettyprint_status_register_at25f, + .unlock = spi_disable_blockprotect_at25f, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT25F2048", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25F2048, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_at25f, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_62, + } + }, + .printlock = spi_prettyprint_status_register_at25f, + .unlock = spi_disable_blockprotect_at25f, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT25F4096", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25F4096, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_at25f, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_62, + } + }, + .printlock = spi_prettyprint_status_register_at25f4096, + .unlock = spi_disable_blockprotect_at25f4096, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", .name = "AT25FS010", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, diff --git a/flashchips.h b/flashchips.h index 9fb7df0..0d5b8e1 100644 --- a/flashchips.h +++ b/flashchips.h @@ -137,13 +137,12 @@ #define ATMEL_AT25DF321A 0x4701 #define ATMEL_AT25DF641 0x4800 #define ATMEL_AT25DQ161 0x8600 -#define ATMEL_AT25F512 /* No device ID found in datasheet. Vendor ID - * can be read with AT25F512A_RDID */ -#define ATMEL_AT25F512A 0x65 /* Needs AT25F512A_RDID */ +#define ATMEL_AT25F512 0x65 /* guessed, no device ID in datasheet. Needs AT25F_RDID */ +#define ATMEL_AT25F512A 0x65 /* Needs AT25F_RDID */ #define ATMEL_AT25F512B 0x6500 -#define ATMEL_AT25F1024 /* No device ID found in datasheet. Vendor ID - * can be read with AT25F512A_RDID */ -#define ATMEL_AT25F1024A 0x60 /* Needs AT25F512A_RDID */ +#define ATMEL_AT25F1024 0x60 /* Needs AT25F_RDID */ +#define ATMEL_AT25F2048 0x63 /* Needs AT25F_RDID */ +#define ATMEL_AT25F4096 0x64 /* Needs AT25F_RDID */ #define ATMEL_AT25FS010 0x6601 #define ATMEL_AT25FS040 0x6604 #define ATMEL_AT26DF041 0x4400 diff --git a/spi.h b/spi.h index ce2ede8..2f06619 100644 --- a/spi.h +++ b/spi.h @@ -30,10 +30,10 @@ /* INSIZE may be 0x04 for some chips*/ #define JEDEC_RDID_INSIZE 0x03
-/* AT25F512A has bit 3 as don't care bit in commands */ -#define AT25F512A_RDID 0x15 /* 0x15 or 0x1d */ -#define AT25F512A_RDID_OUTSIZE 0x01 -#define AT25F512A_RDID_INSIZE 0x02 +/* Some Atmel AT25F* models have bit 3 as don't care bit in commands */ +#define AT25F_RDID 0x15 /* 0x15 or 0x1d */ +#define AT25F_RDID_OUTSIZE 0x01 +#define AT25F_RDID_INSIZE 0x02
/* Read Electronic Manufacturer Signature */ #define JEDEC_REMS 0x90 diff --git a/spi25.c b/spi25.c index 38f9b2b..294ece7 100644 --- a/spi25.c +++ b/spi25.c @@ -279,6 +279,28 @@ int probe_spi_res2(struct flashctx *flash) return 1; }
+/* Only used for some Atmel chips. */ +int probe_spi_at25f(struct flashctx *flash) +{ + static const unsigned char cmd[AT25F_RDID_OUTSIZE] = { AT25F_RDID }; + unsigned char readarr[AT25F_RDID_INSIZE]; + uint32_t id1; + uint32_t id2; + + if (spi_send_command(flash, sizeof(cmd), sizeof(readarr), cmd, readarr)) + return 0; + + id1 = readarr[0]; + id2 = readarr[1]; + + msg_cdbg("%s: id1 0x%02x, id2 0x%02x\n", __func__, id1, id2); + + if (id1 == flash->chip->manufacture_id && id2 == flash->chip->model_id) + return 1; + + return 0; +} + int spi_chip_erase_60(struct flashctx *flash) { int result; diff --git a/spi25_statusreg.c b/spi25_statusreg.c index 21f5de0..9e7325f 100644 --- a/spi25_statusreg.c +++ b/spi25_statusreg.c @@ -371,6 +371,40 @@ int spi_prettyprint_status_register_at25df_sec(struct flashctx *flash) return spi_prettyprint_status_register_at25df(flash); }
+/* used for AT25F512, AT25F1024(A), AT25F2048 */ +int spi_prettyprint_status_register_at25f(struct flashctx *flash) +{ + uint8_t status; + + status = spi_read_status_register(flash); + spi_prettyprint_status_register_hex(status); + + spi_prettyprint_status_register_atmel_at25_wpen(status); + spi_prettyprint_status_register_bit(status, 6); + spi_prettyprint_status_register_bit(status, 5); + spi_prettyprint_status_register_bit(status, 4); + spi_prettyprint_status_register_bp(status, 1); + spi_prettyprint_status_register_welwip(status); + return 0; +} + +int spi_prettyprint_status_register_at25f512a(struct flashctx *flash) +{ + uint8_t status; + + status = spi_read_status_register(flash); + spi_prettyprint_status_register_hex(status); + + spi_prettyprint_status_register_atmel_at25_wpen(status); + spi_prettyprint_status_register_bit(status, 6); + spi_prettyprint_status_register_bit(status, 5); + spi_prettyprint_status_register_bit(status, 4); + spi_prettyprint_status_register_bit(status, 3); + spi_prettyprint_status_register_bp(status, 0); + spi_prettyprint_status_register_welwip(status); + return 0; +} + int spi_prettyprint_status_register_at25f512b(struct flashctx *flash) { uint8_t status = spi_read_status_register(flash); @@ -385,6 +419,21 @@ int spi_prettyprint_status_register_at25f512b(struct flashctx *flash) return 0; }
+int spi_prettyprint_status_register_at25f4096(struct flashctx *flash) +{ + uint8_t status; + + status = spi_read_status_register(flash); + spi_prettyprint_status_register_hex(status); + + spi_prettyprint_status_register_atmel_at25_wpen(status); + spi_prettyprint_status_register_bit(status, 6); + spi_prettyprint_status_register_bit(status, 5); + spi_prettyprint_status_register_bp(status, 2); + spi_prettyprint_status_register_welwip(status); + return 0; +} + int spi_prettyprint_status_register_at25fs010(struct flashctx *flash) { uint8_t status = spi_read_status_register(flash); @@ -443,6 +492,16 @@ int spi_disable_blockprotect_at25df_sec(struct flashctx *flash) return spi_disable_blockprotect_at25df(flash); }
+int spi_disable_blockprotect_at25f(struct flashctx *flash) +{ + return spi_disable_blockprotect_generic(flash, 0x0C, 1 << 7, 0); +} + +int spi_disable_blockprotect_at25f512a(struct flashctx *flash) +{ + return spi_disable_blockprotect_generic(flash, 0x04, 1 << 7, 0); +} + int spi_disable_blockprotect_at25f512b(struct flashctx *flash) { /* spi_disable_blockprotect_at25df is not really the right way to do @@ -451,6 +510,11 @@ int spi_disable_blockprotect_at25f512b(struct flashctx *flash) return spi_disable_blockprotect_at25df(flash); }
+int spi_disable_blockprotect_at25f4096(struct flashctx *flash) +{ + return spi_disable_blockprotect_generic(flash, 0x1C, 1 << 7, 0); +} + int spi_disable_blockprotect_at25fs010(struct flashctx *flash) { return spi_disable_blockprotect_generic(flash, 0x6C, 1 << 7, 0);
-
Stefan Tauner