This was long overdue.
Move the CLI related functions main() and cli_usage() to cli_classic.c and rename them accordingly. For now, main() just calls cli_classic(), but alternative frontends can be switched in main(). Annotate remaining help texts with CLI dependency inside flashrom.c with a FIXME comment.
Now people can go and create different frontends and be happy. Please note that any other frontend will have to sort of duplicate the probing code in cli_classic.c. Refactoring that part of the code is possible, but not easy because we still want to print instructive help messages for users.
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Index: flashrom-cli_classic/flash.h =================================================================== --- flashrom-cli_classic/flash.h (Revision 830) +++ flashrom-cli_classic/flash.h (Arbeitskopie) @@ -477,21 +477,31 @@ extern unsigned long flashbase; extern int verbose; extern const char *flashrom_version; +extern char *chip_to_probe; #define printf_debug(x...) { if (verbose) printf(x); } void map_flash_registers(struct flashchip *flash); int read_memmapped(struct flashchip *flash, uint8_t *buf, int start, int len); int erase_flash(struct flashchip *flash); +struct flashchip *probe_flash(struct flashchip *first_flash, int force); +int read_flash(struct flashchip *flash, char *filename); +void check_chip_supported(struct flashchip *flash); +int check_max_decode(enum chipbustype buses, uint32_t size); int min(int a, int b); int max(int a, int b); char *extract_param(char **haystack, char *needle, char *delim); int check_erased_range(struct flashchip *flash, int start, int len); int verify_range(struct flashchip *flash, uint8_t *cmpbuf, int start, int len, char *message); char *strcat_realloc(char *dest, const char *src); +void print_version(void); +int selfcheck(void); int doit(struct flashchip *flash, int force, char *filename, int read_it, int write_it, int erase_it, int verify_it);
#define OK 0 #define NT 1 /* Not tested */
+/* cli_classic.c */ +int cli_classic(int argc, char *argv[]); + /* layout.c */ int show_id(uint8_t *bios, int size, int force); int read_romlayout(char *name); Index: flashrom-cli_classic/Makefile =================================================================== --- flashrom-cli_classic/Makefile (Revision 830) +++ flashrom-cli_classic/Makefile (Arbeitskopie) @@ -48,7 +48,7 @@
LIB_OBJS = layout.o
-CLI_OBJS = flashrom.o print.o +CLI_OBJS = flashrom.o cli_classic.o print.o
PROGRAMMER_OBJS = udelay.o programmer.o
Index: flashrom-cli_classic/cli_classic.c =================================================================== --- /dev/null 2009-04-14 16:06:28.000000000 +0200 +++ flashrom-cli_classic/cli_classic.c (Arbeitskopie) @@ -0,0 +1,387 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2000 Silicon Integrated System Corporation + * Copyright (C) 2004 Tyan Corp yhlu@tyan.com + * Copyright (C) 2005-2008 coresystems GmbH + * Copyright (C) 2008,2009,2010 Carl-Daniel Hailfinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <fcntl.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <string.h> +#include <stdlib.h> +#include <getopt.h> +#include "flash.h" +#include "flashchips.h" + +void cli_classic_usage(const char *name) +{ + const char *pname; + int pnamelen; + int remaining = 0; + enum programmer p; + + printf("Usage: %s [-VfLzhR] [-E|-r file|-w file|-v file] [-c chipname]\n" + " [-m [vendor:]part] [-l file] [-i image] [-p programmer]\n\n", name); + + printf("Please note that the command line interface for flashrom will " + "change before\nflashrom 1.0. Do not use flashrom in scripts " + "or other automated tools without\nchecking that your flashrom" + " version won't interpret options in a different way.\n\n"); + + printf + (" -r | --read: read flash and save into file\n" + " -w | --write: write file into flash\n" + " -v | --verify: verify flash against file\n" + " -n | --noverify: don't verify flash against file\n" + " -E | --erase: erase flash device\n" + " -V | --verbose: more verbose output\n" + " -c | --chip <chipname>: probe only for specified flash chip\n" +#if INTERNAL_SUPPORT == 1 + " -m | --mainboard <[vendor:]part>: override mainboard settings\n" +#endif + " -f | --force: force write without checking image\n" + " -l | --layout <file.layout>: read ROM layout from file\n" + " -i | --image <name>: only flash image name from flash layout\n" + " -L | --list-supported: print supported devices\n" +#if PRINT_WIKI_SUPPORT == 1 + " -z | --list-supported-wiki: print supported devices in wiki syntax\n" +#endif + " -p | --programmer <name>: specify the programmer device"); + + for (p = 0; p < PROGRAMMER_INVALID; p++) { + pname = programmer_table[p].name; + pnamelen = strlen(pname); + if (remaining - pnamelen - 2 < 0) { + printf("\n "); + remaining = 43; + } else { + printf(" "); + remaining--; + } + if (p == 0) { + printf("("); + remaining--; + } + printf("%s", pname); + remaining -= pnamelen; + if (p < PROGRAMMER_INVALID - 1) { + printf(","); + remaining--; + } else { + printf(")\n"); + } + } + + printf( + " -h | --help: print this help text\n" + " -R | --version: print the version (release)\n" + "\nYou can specify one of -E, -r, -w, -v or no operation. If no operation is\n" + "specified, then all that happens is that flash info is dumped.\n\n"); + exit(1); +} + +int cli_classic(int argc, char *argv[]) +{ + unsigned long size; + /* Probe for up to three flash chips. */ + struct flashchip *flash, *flashes[3]; + const char *name; + int namelen; + int opt; + int option_index = 0; + int force = 0; + int read_it = 0, write_it = 0, erase_it = 0, verify_it = 0; + int dont_verify_it = 0, list_supported = 0; +#if PRINT_WIKI_SUPPORT == 1 + int list_supported_wiki = 0; +#endif + int operation_specified = 0; + int i; + +#if PRINT_WIKI_SUPPORT == 1 + const char *optstring = "rRwvnVEfc:m:l:i:p:Lzh"; +#else + const char *optstring = "rRwvnVEfc:m:l:i:p:Lh"; +#endif + static struct option long_options[] = { + {"read", 0, 0, 'r'}, + {"write", 0, 0, 'w'}, + {"erase", 0, 0, 'E'}, + {"verify", 0, 0, 'v'}, + {"noverify", 0, 0, 'n'}, + {"chip", 1, 0, 'c'}, + {"mainboard", 1, 0, 'm'}, + {"verbose", 0, 0, 'V'}, + {"force", 0, 0, 'f'}, + {"layout", 1, 0, 'l'}, + {"image", 1, 0, 'i'}, + {"list-supported", 0, 0, 'L'}, +#if PRINT_WIKI_SUPPORT == 1 + {"list-supported-wiki", 0, 0, 'z'}, +#endif + {"programmer", 1, 0, 'p'}, + {"help", 0, 0, 'h'}, + {"version", 0, 0, 'R'}, + {0, 0, 0, 0} + }; + + char *filename = NULL; + + char *tempstr = NULL; + + print_version(); + + if (argc > 1) { + /* Yes, print them. */ + int i; + printf_debug("The arguments are:\n"); + for (i = 1; i < argc; ++i) + printf_debug("%s\n", argv[i]); + } + + if (selfcheck()) + exit(1); + + setbuf(stdout, NULL); + while ((opt = getopt_long(argc, argv, optstring, + long_options, &option_index)) != EOF) { + switch (opt) { + case 'r': + if (++operation_specified > 1) { + fprintf(stderr, "More than one operation " + "specified. Aborting.\n"); + exit(1); + } + read_it = 1; + break; + case 'w': + if (++operation_specified > 1) { + fprintf(stderr, "More than one operation " + "specified. Aborting.\n"); + exit(1); + } + write_it = 1; + break; + case 'v': + //FIXME: gracefully handle superfluous -v + if (++operation_specified > 1) { + fprintf(stderr, "More than one operation " + "specified. Aborting.\n"); + exit(1); + } + if (dont_verify_it) { + fprintf(stderr, "--verify and --noverify are" + "mutually exclusive. Aborting.\n"); + exit(1); + } + verify_it = 1; + break; + case 'n': + if (verify_it) { + fprintf(stderr, "--verify and --noverify are" + "mutually exclusive. Aborting.\n"); + exit(1); + } + dont_verify_it = 1; + break; + case 'c': + chip_to_probe = strdup(optarg); + break; + case 'V': + verbose = 1; + break; + case 'E': + if (++operation_specified > 1) { + fprintf(stderr, "More than one operation " + "specified. Aborting.\n"); + exit(1); + } + erase_it = 1; + break; +#if INTERNAL_SUPPORT == 1 + case 'm': + tempstr = strdup(optarg); + lb_vendor_dev_from_string(tempstr); + break; +#endif + case 'f': + force = 1; + break; + case 'l': + tempstr = strdup(optarg); + if (read_romlayout(tempstr)) + exit(1); + break; + case 'i': + tempstr = strdup(optarg); + find_romentry(tempstr); + break; + case 'L': + list_supported = 1; + break; +#if PRINT_WIKI_SUPPORT == 1 + case 'z': + list_supported_wiki = 1; + break; +#endif + case 'p': + for (programmer = 0; programmer < PROGRAMMER_INVALID; programmer++) { + name = programmer_table[programmer].name; + namelen = strlen(name); + if (strncmp(optarg, name, namelen) == 0) { + switch (optarg[namelen]) { + case ':': + programmer_param = strdup(optarg + namelen + 1); + break; + case '\0': + break; + default: + /* The continue refers to the + * for loop. It is here to be + * able to differentiate between + * foo and foobar. + */ + continue; + } + break; + } + } + if (programmer == PROGRAMMER_INVALID) { + printf("Error: Unknown programmer %s.\n", optarg); + exit(1); + } + break; + case 'R': + /* print_version() is always called during startup. */ + exit(0); + break; + case 'h': + default: + cli_classic_usage(argv[0]); + break; + } + } + + if (list_supported) { + print_supported(); + exit(0); + } + +#if PRINT_WIKI_SUPPORT == 1 + if (list_supported_wiki) { + print_supported_wiki(); + exit(0); + } +#endif + + if (read_it && write_it) { + printf("Error: -r and -w are mutually exclusive.\n"); + cli_classic_usage(argv[0]); + } + + if (optind < argc) + filename = argv[optind++]; + + if (optind < argc) { + printf("Error: Extra parameter found.\n"); + cli_classic_usage(argv[0]); + } + + if (programmer_init()) { + fprintf(stderr, "Error: Programmer initialization failed.\n"); + exit(1); + } + + // FIXME: Delay calibration should happen in programmer code. + myusec_calibrate_delay(); + + for (i = 0; i < ARRAY_SIZE(flashes); i++) { + flashes[i] = + probe_flash(i ? flashes[i - 1] + 1 : flashchips, 0); + if (!flashes[i]) + for (i++; i < ARRAY_SIZE(flashes); i++) + flashes[i] = NULL; + } + + if (flashes[1]) { + printf("Multiple flash chips were detected:"); + for (i = 0; i < ARRAY_SIZE(flashes) && flashes[i]; i++) + printf(" %s", flashes[i]->name); + printf("\nPlease specify which chip to use with the -c <chipname> option.\n"); + programmer_shutdown(); + exit(1); + } else if (!flashes[0]) { + printf("No EEPROM/flash device found.\n"); + if (!force || !chip_to_probe) { + printf("If you know which flash chip you have, and if this version of flashrom\n"); + printf("supports a similar flash chip, you can try to force read your chip. Run:\n"); + printf("flashrom -f -r -c similar_supported_flash_chip filename\n"); + printf("\n"); + printf("Note: flashrom can never write when the flash chip isn't found automatically.\n"); + } + if (force && read_it && chip_to_probe) { + printf("Force read (-f -r -c) requested, forcing chip probe success:\n"); + flashes[0] = probe_flash(flashchips, 1); + if (!flashes[0]) { + printf("flashrom does not support a flash chip named '%s'.\n", chip_to_probe); + printf("Run flashrom -L to view the hardware supported in this flashrom version.\n"); + exit(1); + } + printf("Please note that forced reads most likely contain garbage.\n"); + return read_flash(flashes[0], filename); + } + // FIXME: flash writes stay enabled! + programmer_shutdown(); + exit(1); + } + + flash = flashes[0]; + + check_chip_supported(flash); + + size = flash->total_size * 1024; + if (check_max_decode((buses_supported & flash->bustype), size) && + (!force)) { + fprintf(stderr, "Chip is too big for this programmer " + "(-V gives details). Use --force to override.\n"); + programmer_shutdown(); + return 1; + } + + if (!(read_it | write_it | verify_it | erase_it)) { + printf("No operations were specified.\n"); + // FIXME: flash writes stay enabled! + programmer_shutdown(); + exit(1); + } + + if (!filename && !erase_it) { + printf("Error: No filename specified.\n"); + // FIXME: flash writes stay enabled! + programmer_shutdown(); + exit(1); + } + + /* Always verify write operations unless -n is used. */ + if (write_it && !dont_verify_it) + verify_it = 1; + + return doit(flash, force, filename, read_it, write_it, erase_it, verify_it); +} Index: flashrom-cli_classic/flashrom.c =================================================================== --- flashrom-cli_classic/flashrom.c (Revision 830) +++ flashrom-cli_classic/flashrom.c (Arbeitskopie) @@ -692,6 +692,7 @@ * and the limit is not exceeded on all buses. Tell the user. */ if (bitcount(buses) > limitexceeded) + /* FIXME: This message is designed towards CLI users. */ printf_debug("There is at least one common chip/programmer " "interface which can support a chip of this size. " "You can try --force at your own risk.\n"); @@ -911,73 +912,6 @@ printf("\n"); }
-void cli_usage(const char *name) -{ - const char *pname; - int pnamelen; - int remaining = 0; - enum programmer p; - - printf("cli_usage: %s [-VfLzhR] [-E|-r file|-w file|-v file] [-c chipname]\n" - " [-m [vendor:]part] [-l file] [-i image] [-p programmer]\n\n", name); - - printf("Please note that the command line interface for flashrom will " - "change before\nflashrom 1.0. Do not use flashrom in scripts " - "or other automated tools without\nchecking that your flashrom" - " version won't interpret options in a different way.\n\n"); - - printf - (" -r | --read: read flash and save into file\n" - " -w | --write: write file into flash\n" - " -v | --verify: verify flash against file\n" - " -n | --noverify: don't verify flash against file\n" - " -E | --erase: erase flash device\n" - " -V | --verbose: more verbose output\n" - " -c | --chip <chipname>: probe only for specified flash chip\n" -#if INTERNAL_SUPPORT == 1 - " -m | --mainboard <[vendor:]part>: override mainboard settings\n" -#endif - " -f | --force: force write without checking image\n" - " -l | --layout <file.layout>: read ROM layout from file\n" - " -i | --image <name>: only flash image name from flash layout\n" - " -L | --list-supported: print supported devices\n" -#if PRINT_WIKI_SUPPORT == 1 - " -z | --list-supported-wiki: print supported devices in wiki syntax\n" -#endif - " -p | --programmer <name>: specify the programmer device"); - - for (p = 0; p < PROGRAMMER_INVALID; p++) { - pname = programmer_table[p].name; - pnamelen = strlen(pname); - if (remaining - pnamelen - 2 < 0) { - printf("\n "); - remaining = 43; - } else { - printf(" "); - remaining--; - } - if (p == 0) { - printf("("); - remaining--; - } - printf("%s", pname); - remaining -= pnamelen; - if (p < PROGRAMMER_INVALID - 1) { - printf(","); - remaining--; - } else { - printf(")\n"); - } - } - - printf( - " -h | --help: print this help text\n" - " -R | --version: print the version (release)\n" - "\nYou can specify one of -E, -r, -w, -v or no operation. If no operation is\n" - "specified, then all that happens is that flash info is dumped.\n\n"); - exit(1); -} - void print_version(void) { printf("flashrom v%s\n", flashrom_version); @@ -1034,6 +968,7 @@ printf(" WRITE"); printf("\n"); } + /* FIXME: This message is designed towards CLI users. */ printf("Please email a report to flashrom@flashrom.org if any " "of the above operations\nwork correctly for you with " "this flash part. Please include the flashrom\noutput " @@ -1046,291 +981,7 @@
int main(int argc, char *argv[]) { - unsigned long size; - /* Probe for up to three flash chips. */ - struct flashchip *flash, *flashes[3]; - const char *name; - int namelen; - int opt; - int option_index = 0; - int force = 0; - int read_it = 0, write_it = 0, erase_it = 0, verify_it = 0; - int dont_verify_it = 0, list_supported = 0; -#if PRINT_WIKI_SUPPORT == 1 - int list_supported_wiki = 0; -#endif - int operation_specified = 0; - int i; - -#if PRINT_WIKI_SUPPORT == 1 - const char *optstring = "rRwvnVEfc:m:l:i:p:Lzh"; -#else - const char *optstring = "rRwvnVEfc:m:l:i:p:Lh"; -#endif - static struct option long_options[] = { - {"read", 0, 0, 'r'}, - {"write", 0, 0, 'w'}, - {"erase", 0, 0, 'E'}, - {"verify", 0, 0, 'v'}, - {"noverify", 0, 0, 'n'}, - {"chip", 1, 0, 'c'}, - {"mainboard", 1, 0, 'm'}, - {"verbose", 0, 0, 'V'}, - {"force", 0, 0, 'f'}, - {"layout", 1, 0, 'l'}, - {"image", 1, 0, 'i'}, - {"list-supported", 0, 0, 'L'}, -#if PRINT_WIKI_SUPPORT == 1 - {"list-supported-wiki", 0, 0, 'z'}, -#endif - {"programmer", 1, 0, 'p'}, - {"help", 0, 0, 'h'}, - {"version", 0, 0, 'R'}, - {0, 0, 0, 0} - }; - - char *filename = NULL; - - char *tempstr = NULL; - - print_version(); - - if (argc > 1) { - /* Yes, print them. */ - int i; - printf_debug("The arguments are:\n"); - for (i = 1; i < argc; ++i) - printf_debug("%s\n", argv[i]); - } - - if (selfcheck()) - exit(1); - - setbuf(stdout, NULL); - while ((opt = getopt_long(argc, argv, optstring, - long_options, &option_index)) != EOF) { - switch (opt) { - case 'r': - if (++operation_specified > 1) { - fprintf(stderr, "More than one operation " - "specified. Aborting.\n"); - exit(1); - } - read_it = 1; - break; - case 'w': - if (++operation_specified > 1) { - fprintf(stderr, "More than one operation " - "specified. Aborting.\n"); - exit(1); - } - write_it = 1; - break; - case 'v': - //FIXME: gracefully handle superfluous -v - if (++operation_specified > 1) { - fprintf(stderr, "More than one operation " - "specified. Aborting.\n"); - exit(1); - } - if (dont_verify_it) { - fprintf(stderr, "--verify and --noverify are" - "mutually exclusive. Aborting.\n"); - exit(1); - } - verify_it = 1; - break; - case 'n': - if (verify_it) { - fprintf(stderr, "--verify and --noverify are" - "mutually exclusive. Aborting.\n"); - exit(1); - } - dont_verify_it = 1; - break; - case 'c': - chip_to_probe = strdup(optarg); - break; - case 'V': - verbose = 1; - break; - case 'E': - if (++operation_specified > 1) { - fprintf(stderr, "More than one operation " - "specified. Aborting.\n"); - exit(1); - } - erase_it = 1; - break; -#if INTERNAL_SUPPORT == 1 - case 'm': - tempstr = strdup(optarg); - lb_vendor_dev_from_string(tempstr); - break; -#endif - case 'f': - force = 1; - break; - case 'l': - tempstr = strdup(optarg); - if (read_romlayout(tempstr)) - exit(1); - break; - case 'i': - tempstr = strdup(optarg); - find_romentry(tempstr); - break; - case 'L': - list_supported = 1; - break; -#if PRINT_WIKI_SUPPORT == 1 - case 'z': - list_supported_wiki = 1; - break; -#endif - case 'p': - for (programmer = 0; programmer < PROGRAMMER_INVALID; programmer++) { - name = programmer_table[programmer].name; - namelen = strlen(name); - if (strncmp(optarg, name, namelen) == 0) { - switch (optarg[namelen]) { - case ':': - programmer_param = strdup(optarg + namelen + 1); - break; - case '\0': - break; - default: - /* The continue refers to the - * for loop. It is here to be - * able to differentiate between - * foo and foobar. - */ - continue; - } - break; - } - } - if (programmer == PROGRAMMER_INVALID) { - printf("Error: Unknown programmer %s.\n", optarg); - exit(1); - } - break; - case 'R': - /* print_version() is always called during startup. */ - exit(0); - break; - case 'h': - default: - cli_usage(argv[0]); - break; - } - } - - if (list_supported) { - print_supported(); - exit(0); - } - -#if PRINT_WIKI_SUPPORT == 1 - if (list_supported_wiki) { - print_supported_wiki(); - exit(0); - } -#endif - - if (read_it && write_it) { - printf("Error: -r and -w are mutually exclusive.\n"); - cli_usage(argv[0]); - } - - if (optind < argc) - filename = argv[optind++]; - - if (optind < argc) { - printf("Error: Extra parameter found.\n"); - cli_usage(argv[0]); - } - - if (programmer_init()) { - fprintf(stderr, "Error: Programmer initialization failed.\n"); - exit(1); - } - - // FIXME: Delay calibration should happen in programmer code. - myusec_calibrate_delay(); - - for (i = 0; i < ARRAY_SIZE(flashes); i++) { - flashes[i] = - probe_flash(i ? flashes[i - 1] + 1 : flashchips, 0); - if (!flashes[i]) - for (i++; i < ARRAY_SIZE(flashes); i++) - flashes[i] = NULL; - } - - if (flashes[1]) { - printf("Multiple flash chips were detected:"); - for (i = 0; i < ARRAY_SIZE(flashes) && flashes[i]; i++) - printf(" %s", flashes[i]->name); - printf("\nPlease specify which chip to use with the -c <chipname> option.\n"); - programmer_shutdown(); - exit(1); - } else if (!flashes[0]) { - printf("No EEPROM/flash device found.\n"); - if (!force || !chip_to_probe) { - printf("If you know which flash chip you have, and if this version of flashrom\n"); - printf("supports a similar flash chip, you can try to force read your chip. Run:\n"); - printf("flashrom -f -r -c similar_supported_flash_chip filename\n"); - printf("\n"); - printf("Note: flashrom can never write when the flash chip isn't found automatically.\n"); - } - if (force && read_it && chip_to_probe) { - printf("Force read (-f -r -c) requested, forcing chip probe success:\n"); - flashes[0] = probe_flash(flashchips, 1); - if (!flashes[0]) { - printf("flashrom does not support a flash chip named '%s'.\n", chip_to_probe); - printf("Run flashrom -L to view the hardware supported in this flashrom version.\n"); - exit(1); - } - printf("Please note that forced reads most likely contain garbage.\n"); - return read_flash(flashes[0], filename); - } - // FIXME: flash writes stay enabled! - programmer_shutdown(); - exit(1); - } - - flash = flashes[0]; - - check_chip_supported(flash); - - size = flash->total_size * 1024; - if (check_max_decode((buses_supported & flash->bustype), size) && - (!force)) { - fprintf(stderr, "Chip is too big for this programmer " - "(-V gives details). Use --force to override.\n"); - programmer_shutdown(); - return 1; - } - - if (!(read_it | write_it | verify_it | erase_it)) { - printf("No operations were specified.\n"); - // FIXME: flash writes stay enabled! - programmer_shutdown(); - exit(1); - } - - if (!filename && !erase_it) { - printf("Error: No filename specified.\n"); - // FIXME: flash writes stay enabled! - programmer_shutdown(); - exit(1); - } - - /* Always verify write operations unless -n is used. */ - if (write_it && !dont_verify_it) - verify_it = 1; - - return doit(flash, force, filename, read_it, write_it, erase_it, verify_it); + return cli_classic(argc, argv); }
/* This function signature is horrible. We need to design a better interface,
On 07.01.2010 04:13, Sean Nelson wrote:
Acked-by: Sean Nelson audiohacked@gmail.com
Thanks, r833.
Regards, Carl-Daniel
-
Carl-Daniel Hailfinger -
Sean Nelson