Hi,
as suggested on IRC, I am sending here information about a motherboard with bios that cannot be atm flashed with flashrom.
Motherboard manufacturer: Gigabyte Motherboard model: ga-k8n51gmf-9 Motherboard rev: not specified
BIOS update URI: http://download.gigabyte.us/FileList/BIOS/motherboard_bios_ga-k8n51gmf-9(rh)...
Output of flashrom -w n51gmf9.f8:
This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... ERASE FAILED at 0x00000000! Expected=0xff, Read=0x24, failed byte count from 0x00000000-0x0000ffff: 0xfefa ERASE FAILED! ERASE FAILED! ERASE FAILED! ERASE FAILED! FAILED! Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net channel #flashrom or mail flashrom@flashrom.org ------------------------------------------------------------ DO NOT REBOOT OR POWEROFF!
I have attached output of commands as suggested on the IRC channel.
thanks and bye, Filip Zyzniewski Tefnet
On Tue, Aug 31, 2010 at 10:39 AM, Tefnet Developers developers@tefnet.pl wrote:
Hi,
as suggested on IRC, I am sending here information about a motherboard with bios that cannot be atm flashed with flashrom.
Motherboard manufacturer: Gigabyte Motherboard model: ga-k8n51gmf-9 Motherboard rev: not specified
BIOS update URI: http://download.gigabyte.us/FileList/BIOS/motherboard_bios_ga-k8n51gmf-9(rh)...
Hello,
Please try this patch with the latest SVN, and let us know if it works.
Thanks!
Josh
On Tue, Aug 31, 2010 at 10:24:51PM -0400, Joshua Roys wrote:
On Tue, Aug 31, 2010 at 10:39 AM, Tefnet Developers developers@tefnet.pl wrote:
Hi,
as suggested on IRC, I am sending here information about a motherboard with bios that cannot be atm flashed with flashrom.
Motherboard manufacturer: Gigabyte Motherboard model: ga-k8n51gmf-9 Motherboard rev: not specified
BIOS update URI: http://download.gigabyte.us/FileList/BIOS/motherboard_bios_ga-k8n51gmf-9(rh)...
Hello,
Please try this patch with the latest SVN, and let us know if it works.
Thanks for the patch and thanks for testing. Committed in r1154 (I added the board URL in addition).
Uwe.