I'm not subscribed to the list, but I thought I'd report a successful flash of this motherboard. Thanks!
Attached (assuming it isn't filtered) is the -VVV output from the flash.
On Thu, 12 Dec 2013 23:32:35 -0600 Mark Nipper nipsy@bitgnome.net wrote:
I'm not subscribed to the list, but I thought I'd report a successful flash of this motherboard. Thanks!
Hello Mark,
thanks for your report! I have added your board to our list of supported hardware and will commit that later together with other small changes. Just to make sure... the X8DTE is the one without IPMI, and the X8DTE-F is the one including IPMI. I have added the X8DTE now (the -F was already there).
Attached (assuming it isn't filtered) is the -VVV output from the flash.
Please don't compress logs in the future (and -VVV is rather, well, verbose and unnecessary in success cases - it is meant for debugging - -V is enough).
On 13 Dec 2013, Stefan Tauner wrote:
I have added your board to our list of supported hardware and will commit that later together with other small changes. Just to make sure... the X8DTE is the one without IPMI, and the X8DTE-F is the one including IPMI. I have added the X8DTE now (the -F was already there).
Note, it's a X8DT6, not a X8DTE. My X8DT6 most certainly has IPMI.
On Fri, 13 Dec 2013 10:02:46 -0600 Mark Nipper nipsy@bitgnome.net wrote:
On 13 Dec 2013, Stefan Tauner wrote:
I have added your board to our list of supported hardware and will commit that later together with other small changes. Just to make sure... the X8DTE is the one without IPMI, and the X8DTE-F is the one including IPMI. I have added the X8DTE now (the -F was already there).
Note, it's a X8DT6, not a X8DTE.
oopsie. thanks for catching that.
My X8DT6 most certainly has IPMI.
then it is an X8DT6-F AFAICS: http://www.supermicro.nl/products/motherboard/qpi/5500/x8dt6-f.cfm?sas=y&... (note the missing -F in everywhere when you set ipmi=n and the differences here: http://www.supermicro.nl/products/motherboard/Xeon1333/ )
-
Mark Nipper -
Stefan Tauner