Index: flashrom-wiki_compileout/Makefile

16 Sep 2009

Compile out wiki output on request and move wiki stuff into a separate file.
This is useful for libflashrom (you don't need wiki output in a coreboot
payload).
Please note that the patch below was created by using svn cp print.c
print_wiki.c, then deleting code from each file. As a result, you only
see the deleted code in the patch instead of the added code in print_wiki.c.
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Index: flashrom-wiki_compileout/Makefile
===================================================================

--- flashrom-wiki_compileout/Makefile	(Revision 724)
+++ flashrom-wiki_compileout/Makefile	(Arbeitskopie)
@@ -83,6 +83,9 @@
 # Always enable Dr. Kaiser for now.
 CONFIG_DRKAISER ?= yes
+# Always enable wiki printing for now.
+CONFIG_PRINT_WIKI ?= yes
+
 ifeq ($(CONFIG_SERPROG), yes)
 FEATURE_CFLAGS += -D'SERPROG_SUPPORT=1'
 OBJS += serprog.o
@@ -118,6 +121,11 @@
 OBJS += drkaiser.o
 endif
+ifeq ($(CONFIG_PRINT_WIKI), yes)
+FEATURE_CFLAGS += -D'PRINT_WIKI_SUPPORT=1'
+OBJS += print_wiki.o
+endif
+
 $(PROGRAM): $(OBJS)
    $(CC) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS) $(FEATURE_LIBS)
Index: flashrom-wiki_compileout/flashrom.c
===================================================================
--- flashrom-wiki_compileout/flashrom.c	(Revision 724)
+++ flashrom-wiki_compileout/flashrom.c	(Arbeitskopie)
@@ -581,7 +581,9 @@
         "   -l | --layout <file.layout>:      read ROM layout from file\n"
         "   -i | --image <name>:              only flash image name from flash layout\n"
         "   -L | --list-supported:            print supported devices\n"
+#if CONFIG_PRINT_WIKI == 1
         "   -z | --list-supported-wiki:       print supported devices in wiki syntax\n"
+#endif
         "   -p | --programmer <name>:         specify the programmer device");
for (p = 0; p < PROGRAMMER_INVALID; p++) {
@@ -634,10 +636,18 @@
    int option_index = 0;
    int force = 0;
    int read_it = 0, write_it = 0, erase_it = 0, verify_it = 0;
-	int dont_verify_it = 0, list_supported = 0, list_supported_wiki = 0;
+	int dont_verify_it = 0, list_supported = 0;
+#if CONFIG_PRINT_WIKI == 1
+	int list_supported_wiki = 0;
+#endif
    int operation_specified = 0;
    int ret = 0, i;
+#if CONFIG_PRINT_WIKI == 1
+	const char *optstring = "rRwvnVEfc:m:l:i:p:Lzh";
+#else
+	const char *optstring = "rRwvnVEfc:m:l:i:p:Lh";
+#endif
    static struct option long_options[] = {
    	{"read", 0, 0, 'r'},
    	{"write", 0, 0, 'w'},
@@ -651,7 +661,9 @@
    	{"layout", 1, 0, 'l'},
    	{"image", 1, 0, 'i'},
    	{"list-supported", 0, 0, 'L'},
+#if CONFIG_PRINT_WIKI == 1
    	{"list-supported-wiki", 0, 0, 'z'},
+#endif
    	{"programmer", 1, 0, 'p'},
    	{"help", 0, 0, 'h'},
    	{"version", 0, 0, 'R'},
@@ -683,7 +695,7 @@
    }
setbuf(stdout, NULL);
-	while ((opt = getopt_long(argc, argv, "rRwvnVEfc:m:l:i:p:Lzh",
+	while ((opt = getopt_long(argc, argv, optstring,
    			  long_options, &option_index)) != EOF) {
    	switch (opt) {
    	case 'r':
@@ -754,9 +766,11 @@
    	case 'L':
    		list_supported = 1;
    		break;
+#if CONFIG_PRINT_WIKI == 1
    	case 'z':
    		list_supported_wiki = 1;
    		break;
+#endif
    	case 'p':
    		for (programmer = 0; programmer < PROGRAMMER_INVALID; programmer++) {
    			name = programmer_table[programmer].name;
@@ -813,10 +827,12 @@
    	exit(0);
    }
+#if CONFIG_PRINT_WIKI == 1
    if (list_supported_wiki) {
    	print_wiki_tables();
    	exit(0);
    }
+#endif
if (read_it && write_it) {
    	printf("Error: -r and -w are mutually exclusive.\n");
Index: flashrom-wiki_compileout/print_wiki.c
===================================================================
--- flashrom-wiki_compileout/print_wiki.c	(Revision 724)
+++ flashrom-wiki_compileout/print_wiki.c	(Arbeitskopie)
@@ -37,204 +37,6 @@
    const char *note;
 };
-/*
- * Return a string corresponding to the bustype parameter.
- * Memory is obtained with malloc() and can be freed with free().
- */
-char *flashbuses_to_text(enum chipbustype bustype)
-{
-	char *ret = calloc(1, 1);
-	if (bustype == CHIP_BUSTYPE_UNKNOWN) {
-		ret = strcat_realloc(ret, "Unknown,");
-	/*
-	 * FIXME: Once all chipsets and flash chips have been updated, NONSPI
-	 * will cease to exist and should be eliminated here as well.
-	 */
-	} else if (bustype == CHIP_BUSTYPE_NONSPI) {
-		ret = strcat_realloc(ret, "Non-SPI,");
-	} else {
-		if (bustype & CHIP_BUSTYPE_PARALLEL)
-			ret = strcat_realloc(ret, "Parallel,");
-		if (bustype & CHIP_BUSTYPE_LPC)
-			ret = strcat_realloc(ret, "LPC,");
-		if (bustype & CHIP_BUSTYPE_FWH)
-			ret = strcat_realloc(ret, "FWH,");
-		if (bustype & CHIP_BUSTYPE_SPI)
-			ret = strcat_realloc(ret, "SPI,");
-		if (bustype == CHIP_BUSTYPE_NONE)
-			ret = strcat_realloc(ret, "None,");
-	}
-	/* Kill last comma. */
-	ret[strlen(ret) - 1] = '\0';
-	ret = realloc(ret, strlen(ret) + 1);
-	return ret;
-}
-
-#define POS_PRINT(x) do { pos += strlen(x); printf(x); } while (0)
-
-static int digits(int n)
-{
-	int i;
-
-	if (!n)
-		return 1;
-
-	for (i = 0; n; ++i)
-		n /= 10;
-
-	return i;
-}
-
-void print_supported_chips(void)
-{
-	int okcol = 0, pos = 0, i, chipcount = 0;
-	struct flashchip *f;
-
-	for (f = flashchips; f->name != NULL; f++) {
-		if (GENERIC_DEVICE_ID == f->model_id)
-			continue;
-		okcol = max(okcol, strlen(f->vendor) + 1 + strlen(f->name));
-	}
-	okcol = (okcol + 7) & ~7;
-
-	for (f = flashchips; f->name != NULL; f++)
-		chipcount++;
-
-	printf("\nSupported flash chips (total: %d):\n\n", chipcount);
-	POS_PRINT("Vendor:   Device:");
-	while (pos < okcol) {
-		printf("\t");
-		pos += 8 - (pos % 8);
-	}
-
-	printf("Tested OK:\tKnown BAD:  Size/KB:  Type:\n\n");
-	printf("(P = PROBE, R = READ, E = ERASE, W = WRITE)\n\n");
-
-	for (f = flashchips; f->name != NULL; f++) {
-		/* Don't print "unknown XXXX SPI chip" entries. */
-		if (!strncmp(f->name, "unknown", 7))
-			continue;
-
-		printf("%s", f->vendor);
-		for (i = 0; i < 10 - strlen(f->vendor); i++)
-			printf(" ");
-		printf("%s", f->name);
-
-		pos = 10 + strlen(f->name);
-		while (pos < okcol) {
-			printf("\t");
-			pos += 8 - (pos % 8);
-		}
-		if ((f->tested & TEST_OK_MASK)) {
-			if ((f->tested & TEST_OK_PROBE))
-				POS_PRINT("P ");
-			if ((f->tested & TEST_OK_READ))
-				POS_PRINT("R ");
-			if ((f->tested & TEST_OK_ERASE))
-				POS_PRINT("E ");
-			if ((f->tested & TEST_OK_WRITE))
-				POS_PRINT("W ");
-		}
-		while (pos < okcol + 9) {
-			printf("\t");
-			pos += 8 - (pos % 8);
-		}
-		if ((f->tested & TEST_BAD_MASK)) {
-			if ((f->tested & TEST_BAD_PROBE))
-				printf("P ");
-			if ((f->tested & TEST_BAD_READ))
-				printf("R ");
-			if ((f->tested & TEST_BAD_ERASE))
-				printf("E ");
-			if ((f->tested & TEST_BAD_WRITE))
-				printf("W ");
-		}
-
-		printf("\t    %d", f->total_size);
-		for (i = 0; i < 10 - digits(f->total_size); i++)
-			printf(" ");
-		printf("%s\n", flashbuses_to_text(f->bustype));
-	}
-}
-
-void print_supported_chipsets(void)
-{
-	int i, j, chipsetcount = 0;
-	const struct penable *c = chipset_enables;
-
-	for (i = 0; c[i].vendor_name != NULL; i++)
-		chipsetcount++;
-
-	printf("\nSupported chipsets (total: %d):\n\nVendor:                  "
-	       "Chipset:                 PCI IDs:\n\n", chipsetcount);
-
-	for (i = 0; c[i].vendor_name != NULL; i++) {
-		printf("%s", c[i].vendor_name);
-		for (j = 0; j < 25 - strlen(c[i].vendor_name); j++)
-			printf(" ");
-		printf("%s", c[i].device_name);
-		for (j = 0; j < 25 - strlen(c[i].device_name); j++)
-			printf(" ");
-		printf("%04x:%04x%s\n", c[i].vendor_id, c[i].device_id,
-		       (c[i].status == OK) ? "" : " (untested)");
-	}
-}
-
-void print_supported_boards_helper(const struct board_info *b, const char *msg)
-{
-	int i, j, boardcount = 0;
-
-	for (i = 0; b[i].vendor != NULL; i++)
-		boardcount++;
-
-	printf("\n%s (total: %d):\n\n", msg, boardcount);
-
-	for (i = 0; b[i].vendor != NULL; i++) {
-		printf("%s", b[i].vendor);
-		for (j = 0; j < 25 - strlen(b[i].vendor); j++)
-			printf(" ");
-		printf("%s", b[i].name);
-		for (j = 0; j < 23 - strlen(b[i].name); j++)
-			printf(" ");
-		printf("\n");
-	}
-}
-
-void print_supported_boards(void)
-{
-	int i, j, boardcount = 0;
-	struct board_pciid_enable *b = board_pciid_enables;
-
-	for (i = 0; b[i].vendor_name != NULL; i++)
-		boardcount++;
-
-	printf("\nSupported boards which need write-enable code (total: %d):"
-	       "\n\nVendor:                  Board:                   "
-	       "Required option:\n\n", boardcount);
-
-	for (i = 0; b[i].vendor_name != NULL; i++) {
-		printf("%s", b[i].vendor_name);
-		for (j = 0; j < 25 - strlen(b[i].vendor_name); j++)
-			printf(" ");
-		printf("%s", b[i].board_name);
-		for (j = 0; j < 25 - strlen(b[i].board_name); j++)
-			printf(" ");
-		if (b[i].lb_vendor != NULL)
-			printf("-m %s:%s\n", b[i].lb_vendor, b[i].lb_part);
-		else
-			printf("(none, board is autodetected)\n");
-	}
-
-	print_supported_boards_helper(boards_ok,
-		"Supported boards which don't need write-enable code");
-	print_supported_boards_helper(boards_bad,
-		"Boards which have been verified to NOT work yet");
-	print_supported_boards_helper(laptops_ok,
-		"Laptops which have been verified to work");
-	print_supported_boards_helper(laptops_bad,
-		"Laptops which have been verified to NOT work yet");
-}
-
 const char *wiki_header = "= Supported devices =\n\n\
 <div style="margin-top:0.5em; padding:0.5em 0.5em 0.5em 0.5em; \
 background-color:#eeeeee; align:right; border:1px solid #aabbcc;"><small>\n\
Index: flashrom-wiki_compileout/print.c
===================================================================
--- flashrom-wiki_compileout/print.c	(Revision 724)
+++ flashrom-wiki_compileout/print.c	(Arbeitskopie)
@@ -21,22 +21,9 @@
#include <string.h>
 #include <stdlib.h>
-#include <time.h>
 #include "flash.h"
 #include "flashchips.h"
-struct board_info_url {
-	const char *vendor;
-	const char *name;
-	const char *url;
-};
-
-struct board_info_notes {
-	const char *vendor;
-	const char *name;
-	const char *note;
-};
-
 /*
  * Return a string corresponding to the bustype parameter.
  * Memory is obtained with malloc() and can be freed with free().
@@ -234,512 +221,3 @@
    print_supported_boards_helper(laptops_bad,
    	"Laptops which have been verified to NOT work yet");
 }
-
-const char *wiki_header = "= Supported devices =\n\n\
-<div style="margin-top:0.5em; padding:0.5em 0.5em 0.5em 0.5em; \
-background-color:#eeeeee; align:right; border:1px solid #aabbcc;"><small>\n\
-Please do '''not''' edit these tables in the wiki directly, they are \
-generated by pasting '''flashrom -z''' output.<br />\
-'''Last update:''' %s(generated by flashrom %s)\n</small></div>\n";
-
-const char *chipset_th = "{| border="0" style="font-size: smaller"\n\
-|- bgcolor="#6699dd"\n! align="left" | Vendor\n\
-! align="left" | Southbridge\n! align="left" | PCI IDs\n\
-! align="left" | Status\n\n";
-
-const char *board_th = "{| border="0" style="font-size: smaller" \
-valign="top"\n|- bgcolor="#6699dd"\n! align="left" | Vendor\n\
-! align="left" | Mainboard\n! align="left" | Status\n\n";
-
-const char *board_th2 = "{| border="0" style="font-size: smaller" \
-valign="top"\n|- bgcolor="#6699dd"\n! align="left" | Vendor\n\
-! align="left" | Mainboard\n! align="left" | Required option\n\
-! align="left" | Status\n\n";
-
-const char *board_intro = "\
-\n== Supported mainboards ==\n\n\
-In general, it is very likely that flashrom works out of the box even if your \
-mainboard is not listed below.\n\nThis is a list of mainboards where we have \
-verified that they either do or do not need any special initialization to \
-make flashrom work (given flashrom supports the respective chipset and flash \
-chip), or that they do not yet work at all. If they do not work, support may \
-or may not be added later.\n\n\
-Mainboards which don't appear in the list may or may not work (we don't \
-know, someone has to give it a try). Please report any further verified \
-mainboards on the [[Mailinglist|mailing list]].\n";
-
-const char *chip_th = "{| border="0" style="font-size: smaller" \
-valign="top"\n|- bgcolor="#6699dd"\n! align="left" | Vendor\n\
-! align="left" | Device\n! align="left" | Size / KB\n\
-! align="left" | Type\n! align="left" colspan="4" | Status\n\n\
-|- bgcolor="#6699ff"\n| colspan="4" | &nbsp;\n\
-| Probe\n| Read\n| Write\n| Erase\n\n";
-
-const char *programmer_section = "\
-\n== Supported programmers ==\n\nThis is a list \
-of supported PCI devices flashrom can use as programmer:\n\n{| border="0" \
-valign="top"\n| valign="top"|\n\n{| border="0" style="font-size: \
-smaller" valign="top"\n|- bgcolor="#6699dd"\n! align="left" | Vendor\n\
-! align="left" | Device\n! align="left" | PCI IDs\n\
-! align="left" | Status\n\n";
-
-const char *laptop_intro = "\n== Supported laptops/notebooks ==\n\n\
-In general, flashing laptops is more difficult because laptops\n\n\
-* often use the flash chip for stuff besides the BIOS,\n\
-* often have special protection stuff which has to be handled by flashrom,\n\
-* often use flash translation circuits which need drivers in flashrom.\n\n\
-<div style="margin-top:0.5em; padding:0.5em 0.5em 0.5em 0.5em; \
-background-color:#ff6666; align:right; border:1px solid #000000;">\n\
-'''IMPORTANT:''' At this point we recommend to '''not''' use flashrom on \
-untested laptops unless you have a means to recover from a flashing that goes \
-wrong (a working backup flash chip and/or good soldering skills).\n</div>\n";
-
-/* Please keep these lists alphabetically ordered by vendor/board. */
-const struct board_info_url boards_url[] = {
-	/* Verified working boards that don't need write-enables. */
-	{ "Abit",		"AX8",			"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=Y..." },
-	{ "Abit",		"Fatal1ty F-I90HD",	"http://www.abit.com.tw/page/de/motherboard/motherboard_detail.php?pMODEL_NAM..." },
-	{ "Advantech",		"PCM-5820", 		"http://www.emacinc.com/sbc_pc_compatible/pcm_5820.htm" },
-	{ "ASI",		"MB-5BLMP",		"http://www.hojerteknik.com/winnet.htm" },
-	{ "ASRock",		"A770CrossFire",	"http://www.asrock.com/mb/overview.asp?Model=A770CrossFire&s=AM2%5C%2b" },
-	{ "ASUS",		"A7N8X Deluxe",		"http://www.asus.com/Product.aspx?P_ID=wAsRYm41KTp78MFC" },
-	{ "ASUS",		"A7N8X-E Deluxe",	"http://www.asus.com/products.aspx?l1=3&l2=13&l3=56&l4=0&mode..." },
-	{ "ASUS",		"A7V400-MX",		"http://www.asus.com.tw/products.aspx?l1=3&l2=13&l3=63&l4=0&m..." },
-	{ "ASUS",		"A7V8X-MX",		"http://www.asus.com.tw/products.aspx?l1=3&l2=13&l3=64&l4=0&m..." },
-	{ "ASUS",		"A8N-E",		"http://www.asus.com.tw/products.aspx?l1=3&l2=15&l3=171&l4=0&..." },
-	{ "ASUS",		"A8NE-FM/S",		"http://www.hardwareschotte.de/hardware/preise/proid_1266090/preis_ASUS+A8NE-..." },
-	{ "ASUS",		"A8N-SLI",		"http://asus.com/product.aspx?P_ID=J9FKa8z2xVId3pDK" },
-	{ "ASUS",		"A8N-SLI Premium",	"http://www.asus.com.tw/products.aspx?l1=3&l2=15&l3=148&l4=0&..." },
-	{ "ASUS",		"A8V Deluxe",		"http://www.asus.com/product.aspx?P_ID=tvpdgPNCPaABZRVU" },
-	{ "ASUS",		"A8V-E Deluxe",		"http://www.asus.com.tw/products.aspx?l1=3&l2=15&l3=143&l4=0&..." },
-	{ "ASUS",		"A8V-E SE",		"http://www.asus.com.tw/products.aspx?l1=3&l2=15&l3=143&l4=0&..." },
-	{ "ASUS",		"M2A-MX",		"http://www.asus.com/products.aspx?l1=3&l2=101&l3=583&l4=0&mo..." },
-	{ "ASUS",		"M2A-VM",		"http://www.asus.com.tw/products.aspx?l1=3&l2=101&l3=496&l4=0&..." },
-	{ "ASUS",		"M2N-E",		"http://www.asus.com/products.aspx?l1=3&l2=101&l3=308&l4=0&mo..." },
-	{ "ASUS",		"M2V",			"http://asus.com/Product.aspx?P_ID=OqYlEDFfF6ZqZGvp" },
-	{ "ASUS",		"P2B",			"http://www.motherboard.cz/mb/asus/P2B.htm" },
-	{ "ASUS",		"P2B-D",		"ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/" },
-	{ "ASUS",		"P2B-DS",		"ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-ds/" },
-	{ "ASUS",		"P2B-F",		"http://www.motherboard.cz/mb/asus/P2B-F.htm" },
-	{ "ASUS",		"P2L97-S",		"http://www.motherboard.cz/mb/asus/P2L97-S.htm" },
-	{ "ASUS",		"P5B-Deluxe",		"ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B-Deluxe/" },
-	{ "ASUS",		"P5KC",			"http://www.asus.com/product.aspx?P_ID=fFZ8oUIGmLpwNMjj" },
-	{ "ASUS",		"P5L-MX",		"http://www.asus.com/product.aspx?P_ID=X70d3NCzH2DE9vWH" },
-	{ "ASUS",		"P6T Deluxe V2",	"http://www.asus.com/product.aspx?P_ID=iRlP8RG9han6saZx" },
-	{ "A-Trend",		"ATC-6220",		"http://www.motherboard.cz/mb/atrend/atc6220.htm" },
-	{ "BCOM",		"WinNET100",		"http://www.coreboot.org/BCOM_WINNET100" },
-	{ "GIGABYTE",		"GA-6BXC",		"http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValu..." },
-	{ "GIGABYTE",		"GA-6BXDU",		"http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID..." },
-	{ "GIGABYTE",		"GA-6ZMA",		"http://www.gigabyte.de/Support/Motherboard/BIOS_Model.aspx?ProductID=3289" },
-	{ "GIGABYTE",		"GA-EX58-UD4P",		"http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?Produ..." },
-	{ "GIGABYTE",		"GA-EP35-DS3L",		"http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?Produ..." },
-	{ "GIGABYTE",		"GA-MA790GP-DS4H",	"http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID..." },
-	{ "GIGABYTE",		"GA-MA78GPM-DS2H",	"http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID..." },
-	{ "Intel",		"EP80759",		NULL },
-	{ "Jetway",		"J7F4K1G5D-PB",		"http://www.jetway.com.tw/jetway/system/productshow2.asp?id=389&proname=J..." },
-	{ "MSI",		"MS-6570 (K7N2)",	"http://www.msi-computer.de/index.php?func=proddesc&prod_no=519&mainc..." },
-	{ "MSI",		"MS-7065",		"http://browse.geekbench.ca/geekbench2/view/53114" },
-	{ "MSI",		"MS-7168 (Orion)",	"http://support.packardbell.co.uk/uk/item/index.php?i=spec_orion&pi=platf..." },
-	{ "MSI",		"MS-7236 (945PL Neo3)",	"http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=1173" },
-	{ "MSI",		"MS-7255 (P4M890M)",	"http://www.tcsbahamas.com/P4M89.htm" },
-	{ "MSI",		"MS-7345 (P35 Neo2-FIR)","http://www.msi.com/index.php?func=prodcpusupport&maincat_no=1&cat2_n..." },
-	{ "NEC",		"PowerMate 2000",	"http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/" },
-	{ "PC Engines",		"Alix.1c",		"http://pcengines.ch/alix1c.htm" },
-	{ "PC Engines",		"Alix.2c2",		"http://pcengines.ch/alix2c2.htm" },
-	{ "PC Engines",		"Alix.2c3",		"http://pcengines.ch/alix2c3.htm" },
-	{ "PC Engines",		"Alix.3c3",		"http://pcengines.ch/alix3c3.htm" },
-	{ "PC Engines",		"Alix.3d3",		"http://pcengines.ch/alix3d3.htm" },
-	{ "RCA",		"RM4100",		"http://www.settoplinux.org/index.php?title=RCA_RM4100" },
-	{ "Sun",		"Blade x6250",		"http://www.sun.com/servers/blades/x6250/" },
-	{ "Supermicro",		"H8QC8",		"http://www.supermicro.com/Aplus/motherboard/Opteron/nforce/H8QC8.cfm" },
-	{ "Thomson",		"IP1000",		"http://www.settoplinux.org/index.php?title=Thomson_IP1000" },
-	{ "TriGem",		"Lomita",		"http://www.e4allupgraders.info/dir1/motherboards/socket370/lomita.shtml" },
-	{ "T-Online",		"S-100",		"http://wiki.freifunk-hannover.de/T-Online_S_100" },
-	{ "Tyan",		"iS5375-1U",		"http://www.tyan.com/product_board_detail.aspx?pid=610" },
-	{ "Tyan",		"S1846",		"http://www.tyan.com/archive/products/html/tsunamiatx.html" },
-	{ "Tyan",		"S2466",		"http://www.tyan.com/product_board_detail.aspx?pid=461" },
-	{ "Tyan",		"S2881",		"http://www.tyan.com/product_board_detail.aspx?pid=115" },
-	{ "Tyan",		"S2882",		"http://www.tyan.com/product_board_detail.aspx?pid=121" },
-	{ "Tyan",		"S2882-D",		"http://www.tyan.com/product_board_detail.aspx?pid=127" },
-	{ "Tyan",		"S2891",		"http://www.tyan.com/product_board_detail.aspx?pid=144" },
-	{ "Tyan",		"S2892",		"http://www.tyan.com/product_board_detail.aspx?pid=145" },
-	{ "Tyan",		"S2895",		"http://www.tyan.com/archive/products/html/thunderk8we.html" },
-	{ "Tyan",		"S3095",		"http://www.tyan.com/product_board_detail.aspx?pid=181" },
-	{ "Tyan",		"S5180",		"http://www.tyan.com/product_board_detail.aspx?pid=456" },
-	{ "Tyan",		"S5191",		"http://www.tyan.com/product_board_detail.aspx?pid=343" },
-	{ "Tyan",		"S5197",		"http://www.tyan.com/product_board_detail.aspx?pid=349" },
-	{ "Tyan",		"S5211",		"http://www.tyan.com/product_board_detail.aspx?pid=591" },
-	{ "Tyan",		"S5211-1U",		"http://www.tyan.com/product_board_detail.aspx?pid=593" },
-	{ "Tyan",		"S5220",		"http://www.tyan.com/product_board_detail.aspx?pid=597" },
-	{ "Tyan",		"S5375",		"http://www.tyan.com/product_board_detail.aspx?pid=566" },
-	{ "Tyan",		"S5376G2NR/S5376WAG2NR","http://www.tyan.com/product_board_detail.aspx?pid=605" },
-	{ "Tyan",		"S5377",		"http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=642&SKU..." },
-	{ "Tyan",		"S5397",		"http://www.tyan.com/product_board_detail.aspx?pid=560" },
-	{ "VIA",		"EPIA-EX15000G",	"http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&a..." },
-	{ "VIA",		"EPIA-LN",		"http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id..." },
-	{ "VIA",		"EPIA-M700",		"http://via.com.tw/servlet/downloadSvl?motherboard_id=670&download_file_i..." },
-	{ "VIA",		"EPIA-NX15000G",	"http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&a..." },
-	{ "VIA",		"NAB74X0",		"http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id..." },
-	{ "VIA",		"pc2500e",		"http://www.via.com.tw/en/initiatives/empowered/pc2500_mainboard/index.jsp" },
-	{ "VIA",		"VB700X",		"http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id..." },
-
-	/* Verified working boards that DO need write-enables. */
-	{ "Acorp",		"6A815EPD",		"http://web.archive.org/web/20021206163652/www.acorp.com.tw/English/default.a..." },
-	{ "agami",		"Aruma",		"http://web.archive.org/web/20080212111524/http://www.agami.com/site/ais-6000..." },
-	{ "Albatron",		"PM266A Pro",		"http://www.albatron.com.tw/English/Product/MB/pro_detail.asp?rlink=Overview&..." }, /* FIXME */
-	{ "AOpen",		"vKM400Am-S",		"http://usa.aopen.com/products_detail.aspx?Auno=824" },
-	{ "Artec Group",	"DBE61",		"http://wiki.thincan.org/DBE61" },
-	{ "Artec Group",	"DBE62",		"http://wiki.thincan.org/DBE62" },
-	{ "ASUS",		"A7V600-X",		"http://www.asus.com/product.aspx?P_ID=L2XYS0rmtCjeOr4k" },
-	{ "ASUS",		"A7V8X-MX SE",		"http://www.asus.com/product.aspx?P_ID=1guVBT1qV5oqhHyZ" },
-	{ "ASUS",		"P4B266",		"http://www.ciao.co.uk/ASUS_Intel_845D_Chipset_P4B266__5409807#productdetail" },
-	{ "ASUS",		"P4P800-E Deluxe",	"http://www.asus.com/product.aspx?P_ID=INIJUvLlif7LHp3g" },
-	{ "ASUS",		"P5A",			"ftp://ftp.asus.com.tw/pub/ASUS/mb/sock7/ali/p5a/" },
-	{ "Biostar",		"P4M80-M4",		"http://www.biostar-usa.com/mbdetails.asp?model=p4m80-m4" },
-	{ "Elitegroup",		"K7VTA3",		"http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=264&a..." },
-	{ "EPoX",		"EP-8K5A2",		"http://www.epox.com/product.asp?ID=EP-8K5A2" },
-	{ "EPoX",		"EP-BX3",		"http://www.epox.com/product.asp?ID=EP-BX3" },
-	{ "GIGABYTE",		"GA-2761GXDK",		"http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gig..." },
-	{ "GIGABYTE",		"GA-7VT600",		"http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID..." },
-	{ "GIGABYTE",		"GA-7ZM",		"http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID..." },
-	{ "GIGABYTE",		"GA-K8N-SLI",		"http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID..." },
-	{ "GIGABYTE",		"GA-M57SLI-S4",		"http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?Produ..." },
-	{ "GIGABYTE",		"GA-M61P-S3",		"http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID..." },
-	{ "GIGABYTE",		"GA-MA78G-DS3H",	"http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID..." }, /* TODO: Rev 1.x or 2.x? */
-	{ "GIGABYTE",		"GA-MA78GM-S2H",	"http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID..." }, /* TODO: Rev. 1.0, 1.1, or 2.x? */
-	{ "GIGABYTE",		"GA-MA790FX-DQ6",	"http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID..." },
-	{ "HP",			"DL145 G3",		"http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c0081..." },
-	{ "IBM",		"x3455",		"http://www-03.ibm.com/systems/x/hardware/rack/x3455/index.html" },
-	{ "Intel",		"D201GLY",		"http://www.intel.com/support/motherboards/desktop/d201gly/index.htm" },
-	{ "IWILL",		"DK8-HTX",		"http://web.archive.org/web/20060507170150/http://www.iwill.net/product_2.asp..." },
-	{ "Kontron",		"986LCD-M",		"http://de.kontron.com/products/boards+and+mezzanines/embedded+motherboards/m..." },
-	{ "Mitac",		"6513WU",		"http://web.archive.org/web/20050313054828/http://www.mitac.com/micweb/produc..." },
-	{ "MSI",		"MS-6590 (KT4 Ultra)",	"http://www.msicomputer.com/product/p_spec.asp?model=KT4_Ultra&class=mb" },
-	{ "MSI",		"MS-6702E (K8T Neo2-F)","http://www.msicomputer.com/product/p_spec.asp?model=K8T_Neo2-F&class=mb" },
-	{ "MSI",		"MS-6712 (KT4V)",	"http://www.msi.com/index.php?func=proddesc&maincat_no=1&cat2_no=&..." },
-	{ "MSI",		"MS-7046",		"http://www.heimir.de/ms7046/" },
-	{ "MSI",		"MS-7135 (K8N Neo3)",	"http://www.msi-computer.de/index.php?func=proddesc&prod_no=170&mainc..." },
-	{ "Shuttle",		"AK38N",		"http://eu.shuttle.com/en/desktopdefault.aspx/tabid-36/558_read-9889/" },
-	{ "Soyo",		"SY-7VCA",		"http://www.tomshardware.com/reviews/12-socket-370-motherboards,196-15.html" },
-	{ "Tyan",		"S2498 (Tomcat K7M)",	"http://www.tyan.com/archive/products/html/tomcatk7m.html" },
-	{ "VIA",		"EPIA-CN",		"http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id..." },
-	{ "VIA",		"EPIA M/MII/...",	"http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&a..." }, /* EPIA-MII link for now */
-	{ "VIA",		"EPIA-N/NL",		"http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&a..." }, /* EPIA-N link for now */
-	{ "VIA",		"EPIA SP",		"http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&a..." },
-	{ "VIA",		"PC3500G",		"http://www.via.com.tw/en/initiatives/empowered/pc3500_mainboard/index.jsp" },
- 
-	/* Verified non-working boards (for now). */
-	{ "Abit",		"IS-10",		"http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NAM..." },
-	{ "ASRock",		"K7VT4A+",		"http://www.asrock.com/mb/overview.asp?Model=K7VT4A%%2b&s=" },
-	{ "ASUS",		"MEW-AM",		"ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/" },
-	{ "ASUS",		"MEW-VM",		"http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm" },
-	{ "ASUS",		"P3B-F",		"ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p3b-f/" },
-	{ "ASUS",		"P5B",			"ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B/" },
-	{ "ASUS",		"P5BV-M",		"ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B-VM/" },
-	{ "Biostar",		"M6TBA",		"ftp://ftp.biostar-usa.com/manuals/M6TBA/" },
-	{ "Boser",		"HS-6637",		"http://www.boser.com.tw/manual/HS-62376637v3.4.pdf" },
-	{ "DFI",		"855GME-MGF",		"http://www.dfi.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?a..." },
-	{ "FIC",		"VA-502",		"ftp://ftp.fic.com.tw/motherboard/manual/socket7/va-502/" },
-	{ "MSI",		"MS-6178",		"http://www.msi-technology.de/index.php?func=proddesc&prod_no=343&mai..." },
-	{ "MSI",		"MS-7260 (K9N Neo)",	"http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=255" },
-	{ "Soyo",		"SY-5VD",		"http://www.soyo.com/content/Downloads/163/&c=80&p=464&l=English" },
-	{ "Sun",		"Fire x4540",		"http://www.sun.com/servers/x64/x4540/" },
-	{ "Sun",		"Fire x4150",		"http://www.sun.com/servers/x64/x4150/" },
-	{ "Sun",		"Fire x4200",		"http://www.sun.com/servers/entry/x4200/" },
-	{ "Sun",		"Fire x4600",		"http://www.sun.com/servers/x64/x4600/" },
-
-	/* Verified working laptops. */
-	{ "Lenovo",		"3000 V100 TF05Cxx",	"http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Leno..." },
-
-	/* Verified non-working laptops (for now). */
-	{ "Acer",		"Aspire One",		NULL },
-	{ "ASUS",		"Eee PC 701 4G",	"http://www.asus.com/product.aspx?P_ID=h6SPd3tEzLEsrEiS" },
-	{ "Dell",		"Latitude CPi A366XT",	"http://www.coreboot.org/Dell_Latitude_CPi_A366XT" },
-	{ "HP/Compaq",		"nx9010",		"http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc..." },
-	{ "IBM/Lenovo",		"Thinkpad T40p",	"http://www.thinkwiki.org/wiki/Category:T40p" },
-	{ "IBM/Lenovo",		"240",			"http://www.stanford.edu/~bresnan//tp240.html" },
-
-	{ NULL,			NULL,			0 },
-};
-
-/* Please keep these lists alphabetically ordered by vendor/board. */
-const struct board_info_notes boards_notes[] = {
-	/* Verified working boards that don't need write-enables. */
-	{ "ASI",		"MB-5BLMP",		"Used in the IGEL WinNET III thin client." },
-	{ "ASUS",		"A8V-E SE",		"See http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html." },
-	{ "ASUS",		"M2A-VM",		"See http://www.coreboot.org/pipermail/coreboot/2007-September/025281.html." },
-	{ "BCOM",		"WinNET100",		"Used in the IGEL-316 thin client." },
-	{ "GIGABYTE",		"GA-7ZM",		"Works fine iff you remove jumper JP9 on the board and disable the flash protection BIOS option." },
-
-	/* Verified working boards that DO need write-enables. */
-	{ "Acer",		"Aspire One",		"See http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html." },
-
-	/* Verified non-working boards (for now). */
-	{ "MSI",		"MS-6178",		"Immediately powers off if you try to hot-plug the chip. However, this does '''not''' happen if you use coreboot." },
-	{ "MSI",		"MS-7260 (K9N Neo)",	"Interestingly flashrom does not work when the vendor BIOS is booted, but it ''does'' work flawlessly when the machine is booted with coreboot." },
-
-	/* Verified working laptops. */
-	/* None which need comments, yet... */
-
-	/* Verified non-working laptops (for now). */
-	{ "Acer",		"Aspire One",		"http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html" },
-	{ "ASUS",		"Eee PC 701 4G",	"It seems the chip (25X40VSIG) is behind some SPI flash translation layer (likely in the EC, the ENE KB3310)." },
-	{ "Dell",		"Latitude CPi A366XT",	"The laptop immediately powers off if you try to hot-swap the chip. It's not yet tested if write/erase would work on this laptop." },
-	{ "HP/Compaq",		"nx9010",		"Hangs upon '''flashrom -V''' (needs hard power-cycle then)." },
-	{ "IBM/Lenovo",		"Thinkpad T40p",	"Seems to (partially) work at first, but one block/sector cannot be written which then leaves you with a bricked laptop. Maybe this can be investigated and fixed in software later." },
-
-	{ NULL,			NULL,			0 },
-};
-
-static int url(const char *vendor, const char *board)
-{
-	int i;
-	const struct board_info_url *b = boards_url;
-
-        for (i = 0; b[i].vendor != NULL; i++) {
-		if (!strcmp(vendor, b[i].vendor) && !strcmp(board, b[i].name))
-			return i;
-	}
-
-	return -1;
-}
-
-static int note(const char *vendor, const char *board)
-{
-	int i;
-	const struct board_info_notes *n = boards_notes;
-
-        for (i = 0; n[i].vendor != NULL; i++) {
-		if (!strcmp(vendor, n[i].vendor) && !strcmp(board, n[i].name))
-			return i;
-	}
-
-	return -1;
-}
-
-void print_supported_chipsets_wiki(void)
-{
-	int i, j, enablescount = 0, color = 1;
-	const struct penable *e;
-
-	for (e = chipset_enables; e->vendor_name != NULL; e++)
-		enablescount++;
-
-	printf("\n== Supported chipsets ==\n\nTotal amount of supported "
-	       "chipsets: '''%d'''\n\n{| border="0" valign="top"\n| "
-	       "valign="top"|\n\n%s", enablescount, chipset_th);
-
-	e = chipset_enables;
-	for (i = 0, j = 0; e[i].vendor_name != NULL; i++, j++) {
-		/* Alternate colors if the vendor changes. */
-		if (i > 0 && strcmp(e[i].vendor_name, e[i - 1].vendor_name))
-			color = !color;
-
-		printf("|- bgcolor="#%s" valign="top"\n| %s || %s "
-		       "|| %04x:%04x || %s\n", (color) ? "eeeeee" : "dddddd",
-		       e[i].vendor_name, e[i].device_name,
-		       e[i].vendor_id, e[i].device_id,
-		       (e[i].status == OK) ? "{{OK}}" : "?");
-
-		/* Split table in three columns. */
-		if (j >= (enablescount / 3 + 1)) {
-			printf("\n|}\n\n| valign="top"|\n\n%s", chipset_th);
-			j = 0;
-		}
-	}
-
-	printf("\n|}\n\n|}\n");
-}
-
-static void wiki_helper(const char *heading, const char *status,
-			int cols, const struct board_info boards[])
-{
-	int i, j, k, c, boardcount = 0, color = 1, num_notes = 0;
-	const struct board_info *b;
-	const struct board_info_url *u = boards_url;
-	char *notes = calloc(1, 1);
-	char tmp[900 + 1];
-
-	for (b = boards; b->vendor != NULL; b++)
-		boardcount++;
-
-	printf("\n'''%s'''\n\nTotal amount of boards: '''%d'''\n\n"
-	       "{| border="0" valign="top"\n| valign="top"|\n\n%s",
-	       heading, boardcount, board_th);
-
-        for (i = 0, j = 0, b = boards; b[i].vendor != NULL; i++, j++) {
-		/* Alternate colors if the vendor changes. */
-		if (i > 0 && strcmp(b[i].vendor, b[i - 1].vendor))
-			color = !color;
-
-		k = url(b[i].vendor, b[i].name);
-		c = note(b[i].vendor, b[i].name);
-
-		printf("|- bgcolor="#%s" valign="top"\n| %s || %s%s %s%s ||"
-		       " {{%s}}", (color) ? "eeeeee" : "dddddd", b[i].vendor,
-		       (k != -1 && u[k].url) ? "[" : "",
-		       (k != -1 && u[k].url) ? u[k].url : "",
-		       b[i].name, (k != -1 && u[k].url) ? "]" : "", status);
-
-		if (c != -1) {
-			printf("<sup>%d</sup>\n", num_notes + 1);
-			snprintf((char *)&tmp, 900, "<sup>%d</sup> %s<br />\n",
-				 1 + num_notes++, boards_notes[c].note);
-			notes = strcat_realloc(notes, (char *)&tmp);
-		} else {
-			printf("\n");
-		}
-
-		/* Split table in 'cols' columns. */
-		if (j >= (boardcount / cols + 1)) {
-			printf("\n|}\n\n| valign="top"|\n\n%s", board_th);
-			j = 0;
-		}
-	}
-
-	printf("\n|}\n\n|}\n");
-
-	if (num_notes > 0)
-		printf("\n<small>\n%s</small>\n", notes);
-	free(notes);
-}
-
-static void wiki_helper2(const char *heading, int cols)
-{
-	int i, j, k, boardcount = 0, color = 1;
-	struct board_pciid_enable *b;
-	const struct board_info_url *u = boards_url;
-
-	for (b = board_pciid_enables; b->vendor_name != NULL; b++)
-		boardcount++;
-
-	printf("\n'''%s'''\n\nTotal amount of boards: '''%d'''\n\n"
-	       "{| border="0" valign="top"\n| valign="top"|\n\n%s",
-	       heading, boardcount, board_th2);
-
-	b = board_pciid_enables;
-	for (i = 0, j = 0; b[i].vendor_name != NULL; i++, j++) {
-		/* Alternate colors if the vendor changes. */
-		if (i > 0 && strcmp(b[i].vendor_name, b[i - 1].vendor_name))
-			color = !color;
-
-		k = url(b[i].vendor_name, b[i].board_name);
-
-		printf("|- bgcolor="#%s" valign="top"\n| %s || %s%s %s%s "
-		       "|| %s%s%s%s || {{OK}}\n", (color) ? "eeeeee" : "dddddd",
-		       b[i].vendor_name, (k != -1 && u[k].url) ? "[" : "",
-		       (k != -1 && u[k].url) ? u[k].url : "", b[i].board_name,
-		       (k != -1 && u[k].url) ? "]" : "",
-		       (b[i].lb_vendor) ? "-m " : "&mdash;",
-		       (b[i].lb_vendor) ? b[i].lb_vendor : "",
-		       (b[i].lb_vendor) ? ":" : "",
-		       (b[i].lb_vendor) ? b[i].lb_part : "");
-
-		/* Split table in three columns. */
-		if (j >= (boardcount / cols + 1)) {
-			printf("\n|}\n\n| valign="top"|\n\n%s", board_th2);
-			j = 0;
-		}
-	}
-
-	printf("\n|}\n\n|}\n");
-}
-
-void print_supported_boards_wiki(void)
-{
-	printf("%s", board_intro);
-	wiki_helper("Known good (worked out of the box)", "OK", 3, boards_ok);
-	wiki_helper2("Known good (with write-enable code in flashrom)", 3);
-	wiki_helper("Not supported (yet)", "No", 3, boards_bad);
-
-	printf("%s", laptop_intro);
-	wiki_helper("Known good (worked out of the box)", "OK", 1, laptops_ok);
-	wiki_helper("Not supported (yet)", "No", 1, laptops_bad);
-}
-
-void print_supported_chips_wiki(void)
-{
-	int i = 0, c = 1, chipcount = 0;
-	struct flashchip *f, *old = NULL;
-	uint32_t t;
-
-	for (f = flashchips; f->name != NULL; f++)
-		chipcount++;
-
-	printf("\n== Supported chips ==\n\nTotal amount of supported "
-	       "chips: '''%d'''\n\n{| border="0" valign="top"\n"
-		"| valign="top"|\n\n%s", chipcount, chip_th);
-
-	for (f = flashchips; f->name != NULL; f++, i++) {
-		/* Don't print "unknown XXXX SPI chip" entries. */
-		if (!strncmp(f->name, "unknown", 7))
-			continue;
-
-		/* Alternate colors if the vendor changes. */
-		if (old != NULL && strcmp(old->vendor, f->vendor))
-			c = !c;
-
-		t = f->tested;
-		printf("|- bgcolor="#%s" valign="top"\n| %s || %s || %d "
-		       "|| %s || {{%s}} || {{%s}} || {{%s}} || {{%s}}\n",
-		       (c == 1) ? "eeeeee" : "dddddd", f->vendor, f->name,
-		       f->total_size, flashbuses_to_text(f->bustype),
-		       (t & TEST_OK_PROBE) ? "OK" :
-		       (t & TEST_BAD_PROBE) ? "No" : ((c) ? "?2" : "?"),
-		       (t & TEST_OK_READ) ? "OK" :
-		       (t & TEST_BAD_READ) ? "No" : ((c) ? "?2" : "?"),
-		       (t & TEST_OK_ERASE) ? "OK" :
-		       (t & TEST_BAD_ERASE) ? "No" : ((c) ? "?2" : "?"),
-		       (t & TEST_OK_WRITE) ? "OK" :
-		       (t & TEST_BAD_WRITE) ? "No" : ((c) ? "?2" : "?"));
-
-		/* Split table into three columns. */
-		if (i >= (chipcount / 3 + 1)) {
-			printf("\n|}\n\n| valign="top"|\n\n%s", chip_th);
-			i = 0;
-		}
-
-		old = f;
-	}
-
-	printf("\n|}\n\n|}\n");
-}
-
-void print_supported_pcidevs_wiki(struct pcidev_status *devs)
-{
-	int i = 0;
-	static int c = 0;
-
-	/* Alternate colors if the vendor changes. */
-	c = !c;
-
-	for (i = 0; devs[i].vendor_name != NULL; i++) {
-		printf("|- bgcolor="#%s" valign="top"\n| %s || %s || "
-		       "%04x:%04x || {{%s}}\n", (c) ? "eeeeee" : "dddddd",
-		       devs[i].vendor_name, devs[i].device_name,
-		       devs[i].vendor_id, devs[i].device_id,
-		       (devs[i].status == PCI_NT) ? (c) ? "?2" : "?" : "OK");
-	}
-}
-
-void print_wiki_tables(void)
-{
-	time_t t = time(NULL);
-
-	printf(wiki_header, ctime(&t), flashrom_version);
-	print_supported_chips_wiki();
-	print_supported_chipsets_wiki();
-	print_supported_boards_wiki();
-	printf("%s", programmer_section);
-#if NIC3COM_SUPPORT == 1
-	print_supported_pcidevs_wiki(nics_3com);
-#endif
-#if DRKAISER_SUPPORT == 1
-	/* FIXME: drkaiser_pcidev is missing here. */
-#endif
-#if SATASII_SUPPORT == 1
-	print_supported_pcidevs_wiki(satas_sii);
-#endif
-	printf("\n|}\n");
-}
-
-- 
http://www.hailfinger.org/



    

[PATCH] Compile out wiki output on request

Index: flashrom-wiki_compileout/Makefile

Index: flashrom-wiki_compileout/flashrom.c