Here is the output file from the flash. I didn't create a log the first time but did it again with the --o ~/biosoutput
On Thu, Dec 21, 2017 at 12:45 PM, Brandon Kachmar ytech1758@gmail.com wrote:
$ sudo flashrom -p internal -w /home/bman/Desktop/IL9Pro13.rom flashrom v0.9.9-rc1-r1942 on Linux 4.10.0-42-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org
Calibrating delay loop... OK. Found chipset "Intel ICH7/ICH7R". Enabling flash write... OK. Error: SCIP never cleared! Error: SCIP never cleared! .... ... ... ... Found Winbond flash chip "W39V040FB" (512 kB, FWH) mapped at physical address 0x00000000fff80000. === This flash part has status UNTESTED for operations: ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom@flashrom.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Reading old flash chip contents... done. Erasing and writing flash chip... FAILED at 0x000171d7! Expected=0xff, Found=0x00, failed byte count from 0x00010000-0x0001ffff: 0x1 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x0001833f! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x0007ffff: 0x1 ERASE FAILED! Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Apparently at least some data has changed. Your flash chip is in an unknown state. Get help on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org with the subject "FAILED: <your board name>"!
DO NOT REBOOT OR POWEROFF!
-
Brandon Kachmar