Author: hailfinger Date: Thu Aug 30 23:41:00 2012 New Revision: 1589 URL: http://flashrom.org/trac/flashrom/changeset/1589
Log: Add RES/REMS support to all dummyflasher emulated chips as a test case.
Fix a few odd corner cases in RES/REMS support in dummyflasher emulation which became noticeable once RES/REMS was used heavily.
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net Acked-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Modified: trunk/dummyflasher.c
Modified: trunk/dummyflasher.c ============================================================================== --- trunk/dummyflasher.c Wed Aug 29 05:41:57 2012 (r1588) +++ trunk/dummyflasher.c Thu Aug 30 23:41:00 2012 (r1589) @@ -493,6 +493,9 @@ { unsigned int offs, i, toread; static int unsigned aai_offs; + const unsigned char sst25vf040_rems_response[2] = {0xbf, 0x44}; + const unsigned char sst25vf032b_rems_response[2] = {0xbf, 0x4a}; + const unsigned char mx25l6436_rems_response[2] = {0xc2, 0x16};
if (writecnt == 0) { msg_perr("No command sent to the chip!\n"); @@ -529,20 +532,54 @@
switch (writearr[0]) { case JEDEC_RES: - if (emu_chip != EMULATE_ST_M25P10_RES) + if (writecnt < JEDEC_RES_OUTSIZE) break; - /* Respond with ST_M25P10_RES. */ - if (readcnt > 0) - readarr[0] = 0x10; + /* offs calculation is only needed for SST chips which treat RES like REMS. */ + offs = writearr[1] << 16 | writearr[2] << 8 | writearr[3]; + offs += writecnt - JEDEC_REMS_OUTSIZE; + switch (emu_chip) { + case EMULATE_ST_M25P10_RES: + if (readcnt > 0) + memset(readarr, 0x10, readcnt); + break; + case EMULATE_SST_SST25VF040_REMS: + for (i = 0; i < readcnt; i++) + readarr[i] = sst25vf040_rems_response[(offs + i) % 2]; + break; + case EMULATE_SST_SST25VF032B: + for (i = 0; i < readcnt; i++) + readarr[i] = sst25vf032b_rems_response[(offs + i) % 2]; + break; + case EMULATE_MACRONIX_MX25L6436: + if (readcnt > 0) + memset(readarr, 0x16, readcnt); + break; + default: /* ignore */ + break; + } break; case JEDEC_REMS: - if (emu_chip != EMULATE_SST_SST25VF040_REMS) + /* REMS response has wraparound and uses an address parameter. */ + if (writecnt < JEDEC_REMS_OUTSIZE) break; - /* Respond with SST_SST25VF040_REMS. */ - if (readcnt > 0) - readarr[0] = 0xbf; - if (readcnt > 1) - readarr[1] = 0x44; + offs = writearr[1] << 16 | writearr[2] << 8 | writearr[3]; + offs += writecnt - JEDEC_REMS_OUTSIZE; + switch (emu_chip) { + case EMULATE_SST_SST25VF040_REMS: + for (i = 0; i < readcnt; i++) + readarr[i] = sst25vf040_rems_response[(offs + i) % 2]; + break; + case EMULATE_SST_SST25VF032B: + for (i = 0; i < readcnt; i++) + readarr[i] = sst25vf032b_rems_response[(offs + i) % 2]; + break; + case EMULATE_MACRONIX_MX25L6436: + for (i = 0; i < readcnt; i++) + readarr[i] = mx25l6436_rems_response[(offs + i) % 2]; + break; + default: /* ignore */ + break; + } break; case JEDEC_RDID: switch (emu_chip) {