Author: uwe Date: Mon Jun 7 21:06:26 2010 New Revision: 1037 URL: http://flashrom.org/trac/coreboot/changeset/1037
Log: board_enable.c: Remove useless 'name' parameter.
Every board-enable function is passed a 'const char *name' (board name) which is totally useless as the board name was already printed by flashrom at that point. Also, 95% or so of the board-enables don't use the parameter anyway. So, drop it.
Signed-off-by: Uwe Hermann uwe@hermann-uwe.de Acked-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Modified: trunk/board_enable.c trunk/flash.h trunk/wbsio_spi.c
Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Mon Jun 7 16:10:55 2010 (r1036) +++ trunk/board_enable.c Mon Jun 7 21:06:26 2010 (r1037) @@ -98,16 +98,14 @@ /** * SMSC FDC37B787: Raise GPIO50 */ - -static int fdc37b787_gpio50_raise(uint16_t port, const char * name) +static int fdc37b787_gpio50_raise(uint16_t port) { uint8_t id, val;
OUTB(0x55, port); /* enter conf mode */ id = sio_read(port, 0x20); if (id != 0x44) { - msg_perr("\nERROR: %s: FDC37B787: Wrong ID 0x%02X.\n", - name, id); + msg_perr("\nERROR: FDC37B787: Wrong ID 0x%02X.\n", id); OUTB(0xAA, port); /* leave conf mode */ return -1; } @@ -117,8 +115,7 @@ val = sio_read(port, 0xC8); /* GP50 */ if ((val & 0x1B) != 0x10) /* output, no invert, GPIO */ { - msg_perr("\nERROR: %s: GPIO50 mode 0x%02X unexpected.\n", - name, val); + msg_perr("\nERROR: GPIO50 mode 0x%02X unexpected.\n", val); OUTB(0xAA, port); return -1; } @@ -132,9 +129,9 @@ /** * Suited for Nokia IP530: Intel 440BX + PIIX4 + FDC37B787 */ -static int fdc37b787_gpio50_raise_3f0(const char *name) +static int fdc37b787_gpio50_raise_3f0(void) { - return fdc37b787_gpio50_raise(0x3f0, name); + return fdc37b787_gpio50_raise(0x3f0); }
/** @@ -144,14 +141,14 @@ * - Agami Aruma * - IWILL DK8-HTX */ -static int w83627hf_gpio24_raise(uint16_t port, const char *name) +static int w83627hf_gpio24_raise(uint16_t port) { w836xx_ext_enter(port);
/* Is this the W83627HF? */ if (sio_read(port, 0x20) != 0x52) { /* Super I/O device ID reg. */ - msg_perr("\nERROR: %s: W83627HF: Wrong ID: 0x%02X.\n", - name, sio_read(port, 0x20)); + msg_perr("\nERROR: W83627HF: Wrong ID: 0x%02X.\n", + sio_read(port, 0x20)); w836xx_ext_leave(port); return -1; } @@ -172,9 +169,9 @@ return 0; }
-static int w83627hf_gpio24_raise_2e(const char *name) +static int w83627hf_gpio24_raise_2e(void) { - return w83627hf_gpio24_raise(0x2e, name); + return w83627hf_gpio24_raise(0x2e); }
/** @@ -184,14 +181,14 @@ * - MSI K8T Neo2-F * - MSI K8N-NEO3 */ -static int w83627thf_gpio4_4_raise(uint16_t port, const char *name) +static int w83627thf_gpio4_4_raise(uint16_t port) { w836xx_ext_enter(port);
/* Is this the W83627THF? */ if (sio_read(port, 0x20) != 0x82) { /* Super I/O device ID reg. */ - msg_perr("\nERROR: %s: W83627THF: Wrong ID: 0x%02X.\n", - name, sio_read(port, 0x20)); + msg_perr("\nERROR: W83627THF: Wrong ID: 0x%02X.\n", + sio_read(port, 0x20)); w836xx_ext_leave(port); return -1; } @@ -209,14 +206,14 @@ return 0; }
-static int w83627thf_gpio4_4_raise_2e(const char *name) +static int w83627thf_gpio4_4_raise_2e(void) { - return w83627thf_gpio4_4_raise(0x2e, name); + return w83627thf_gpio4_4_raise(0x2e); }
-static int w83627thf_gpio4_4_raise_4e(const char *name) +static int w83627thf_gpio4_4_raise_4e(void) { - return w83627thf_gpio4_4_raise(0x4e, name); + return w83627thf_gpio4_4_raise(0x4e); }
/** @@ -240,7 +237,7 @@ * - ASUS A7V8X-MX SE and A7V400-MX: AMD K7 + VIA KM400A + VT8235 * - Tyan S2498 (Tomcat K7M): AMD Geode NX + VIA KM400 + VT8237. */ -static int w836xx_memw_enable_2e(const char *name) +static int w836xx_memw_enable_2e(void) { w836xx_memw_enable(0x2E);
@@ -251,7 +248,7 @@ * Suited for: * - Termtek TK-3370 (rev. 2.5b) */ -static int w836xx_memw_enable_4e(const char *name) +static int w836xx_memw_enable_4e(void) { w836xx_memw_enable(0x4E);
@@ -261,7 +258,7 @@ /** * */ -static int it8705f_write_enable(uint8_t port, const char *name) +static int it8705f_write_enable(uint8_t port) { enter_conf_mode_ite(port); sio_mask(port, 0x24, 0x04, 0x04); /* Flash ROM I/F Writes Enable */ @@ -281,9 +278,9 @@ * * The SIS950 Super I/O probably requires the same flash write enable. */ -static int it8705f_write_enable_2e(const char *name) +static int it8705f_write_enable_2e(void) { - return it8705f_write_enable(0x2e, name); + return it8705f_write_enable(0x2e); }
static int pc87360_gpio_set(uint8_t gpio, int raise) @@ -385,7 +382,7 @@ /** * Suited for ASUS M2V-MX: VIA K8M890 + VT8237A + IT8716F */ -static int via_vt823x_gpio5_raise(const char *name) +static int via_vt823x_gpio5_raise(void) { /* On M2V-MX: GPO5 is connected to WP# and TBL#. */ return via_vt823x_gpio_set(5, 1); @@ -394,7 +391,7 @@ /** * Suited for VIA EPIA N & NL. */ -static int via_vt823x_gpio9_raise(const char *name) +static int via_vt823x_gpio9_raise(void) { return via_vt823x_gpio_set(9, 1); } @@ -405,7 +402,7 @@ * We don't need to do this for EPIA M when using coreboot, GPIO15 is never * lowered there. */ -static int via_vt823x_gpio15_raise(const char *name) +static int via_vt823x_gpio15_raise(void) { return via_vt823x_gpio_set(15, 1); } @@ -417,7 +414,7 @@ * - MSI KT4V and KT4V-L: AMD K7 + VIA KT400 + VT8235 * - MSI KT4 Ultra: AMD K7 + VIA KT400 + VT8235 */ -static int board_msi_kt4v(const char *name) +static int board_msi_kt4v(void) { int ret;
@@ -434,7 +431,7 @@ * We're basically talking to some unknown device on SMBus, my guess * is that it is the Winbond W83781D that lives near the DIP BIOS. */ -static int board_asus_p5a(const char *name) +static int board_asus_p5a(void) { uint8_t tmp; int i; @@ -453,7 +450,7 @@ }
if (i == ASUSP5A_LOOP) { - msg_perr("%s: Unable to contact device.\n", name); + msg_perr("Unable to contact device.\n"); return -1; }
@@ -469,7 +466,7 @@ }
if ((i == ASUSP5A_LOOP) || !(tmp & 0x10)) { - msg_perr("%s: failed to read device.\n", name); + msg_perr("Failed to read device.\n"); return -1; }
@@ -496,7 +493,7 @@ }
if ((i == ASUSP5A_LOOP) || !(tmp & 0x10)) { - msg_perr("%s: failed to write to device.\n", name); + msg_perr("Failed to write to device.\n"); return -1; }
@@ -508,7 +505,7 @@ * * It's not a Super I/O but it uses the same index/data port method. */ -static int board_hp_dl145_g3_enable(const char *name) +static int board_hp_dl145_g3_enable(void) { /* GPIO 0 reg from PM regs */ /* Set GPIO 2 and 5 high, connected to flash WP# and TBL# pins. */ @@ -517,7 +514,7 @@ return 0; }
-static int board_ibm_x3455(const char *name) +static int board_ibm_x3455(void) { /* raise gpio13 */ sio_mask(0xcd6, 0x45, 0x20, 0x20); @@ -528,7 +525,7 @@ /** * Suited for Shuttle FN25 (SN25P): AMD S939 + NVIDIA CK804 (nForce4). */ -static int board_shuttle_fn25(const char *name) +static int board_shuttle_fn25(void) { struct pci_dev *dev;
@@ -612,7 +609,7 @@ * Suited for ASUS A8N-LA: nVidia MCP51. * Suited for ASUS M2NBP-VM CSM: NVIDIA MCP51. */ -static int nvidia_mcp_gpio0_raise(const char *name) +static int nvidia_mcp_gpio0_raise(void) { return nvidia_mcp_gpio_set(0x00, 1); } @@ -620,7 +617,7 @@ /** * Suited for Abit KN8 Ultra: nVidia CK804. */ -static int nvidia_mcp_gpio2_lower(const char *name) +static int nvidia_mcp_gpio2_lower(void) { return nvidia_mcp_gpio_set(0x02, 0); } @@ -629,7 +626,7 @@ * Suited for MSI K8N Neo4: NVIDIA CK804. * Suited for MSI K8N GM2-L: NVIDIA MCP51. */ -static int nvidia_mcp_gpio2_raise(const char *name) +static int nvidia_mcp_gpio2_raise(void) { return nvidia_mcp_gpio_set(0x02, 1); } @@ -645,7 +642,7 @@ * b) #TBL is hardwired on that board to a pull-down. It can be * overridden by connecting the two solder points next to F2. */ -static int nvidia_mcp_gpio5_raise(const char *name) +static int nvidia_mcp_gpio5_raise(void) { return nvidia_mcp_gpio_set(0x05, 1); } @@ -653,7 +650,7 @@ /** * Suited for Abit NF7-S: NVIDIA CK804. */ -static int nvidia_mcp_gpio8_raise(const char *name) +static int nvidia_mcp_gpio8_raise(void) { return nvidia_mcp_gpio_set(0x08, 1); } @@ -661,7 +658,7 @@ /** * Suited for ASUS P5ND2-SLI Deluxe: LGA775 + nForce4 SLI + MCP04. */ -static int nvidia_mcp_gpio10_raise(const char *name) +static int nvidia_mcp_gpio10_raise(void) { return nvidia_mcp_gpio_set(0x10, 1); } @@ -669,7 +666,7 @@ /** * Suited for the Gigabyte GA-K8N-SLI: CK804 southbridge. */ -static int nvidia_mcp_gpio21_raise(const char *name) +static int nvidia_mcp_gpio21_raise(void) { return nvidia_mcp_gpio_set(0x21, 0x01); } @@ -677,7 +674,7 @@ /** * Suited for EPoX EP-8RDA3+: Socket A + nForce2 Ultra 400 + MCP2. */ -static int nvidia_mcp_gpio31_raise(const char *name) +static int nvidia_mcp_gpio31_raise(void) { return nvidia_mcp_gpio_set(0x31, 0x01); } @@ -685,7 +682,7 @@ /** * Suited for Artec Group DBE61 and DBE62. */ -static int board_artecgroup_dbe6x(const char *name) +static int board_artecgroup_dbe6x(void) { #define DBE6x_MSR_DIVIL_BALL_OPTS 0x51400015 #define DBE6x_PRI_BOOT_LOC_SHIFT (2) @@ -798,7 +795,7 @@ /** * Suited for EPoX EP-BX3, and maybe some other Intel 440BX based boards. */ -static int board_epox_ep_bx3(const char *name) +static int board_epox_ep_bx3(void) { return intel_piix4_gpo_set(22, 1); } @@ -806,7 +803,7 @@ /** * Suited for Intel SE440BX-2 */ -static int intel_piix4_gpo27_lower(const char *name) +static int intel_piix4_gpo27_lower(void) { return intel_piix4_gpo_set(27, 0); } @@ -1009,7 +1006,7 @@ * Suited for Abit IP35: Intel P35 + ICH9R. * Suited for Abit IP35 Pro: Intel P35 + ICH9R. */ -static int intel_ich_gpio16_raise(const char *name) +static int intel_ich_gpio16_raise(void) { return intel_ich_gpio_set(16, 1); } @@ -1017,7 +1014,7 @@ /** * Suited for ASUS A8JM: Intel 945 + ICH7 */ -static int intel_ich_gpio34_raise(const char *name) +static int intel_ich_gpio34_raise(void) { return intel_ich_gpio_set(34, 1); } @@ -1025,7 +1022,7 @@ /** * Suited for MSI MS-7046: LGA775 + 915P + ICH6. */ -static int intel_ich_gpio19_raise(const char *name) +static int intel_ich_gpio19_raise(void) { return intel_ich_gpio_set(19, 1); } @@ -1036,7 +1033,7 @@ * - ASUS P4C800-E Deluxe: socket478 + 875P + ICH5. * - ASUS P4P800-E Deluxe: Intel socket478 + 865PE + ICH5R. */ -static int intel_ich_gpio21_raise(const char *name) +static int intel_ich_gpio21_raise(void) { return intel_ich_gpio_set(21, 1); } @@ -1047,7 +1044,7 @@ * - ASUS P4B533-E: socket478 + 845E + ICH4 * - ASUS P4B-MX variant in HP Vectra VL420 SFF: socket478 + 845D + ICH2 */ -static int intel_ich_gpio22_raise(const char *name) +static int intel_ich_gpio22_raise(void) { return intel_ich_gpio_set(22, 1); } @@ -1056,7 +1053,7 @@ * Suited for HP Vectra VL400: 815 + ICH + PC87360. */
-static int board_hp_vl400(const char *name) +static int board_hp_vl400(void) { int ret; ret = intel_ich_gpio_set(25, 1); /* Master write enable ? */ @@ -1072,7 +1069,7 @@ * - Dell PowerEdge 1850: Intel PPGA604 + E7520 + ICH5R. * - ASRock P4i65GV: Intel Socket478 + 865GV + ICH5R. */ -static int intel_ich_gpio23_raise(const char *name) +static int intel_ich_gpio23_raise(void) { return intel_ich_gpio_set(23, 1); } @@ -1080,7 +1077,7 @@ /** * Suited for IBase MB899: i945GM + ICH7. */ -static int intel_ich_gpio26_raise(const char *name) +static int intel_ich_gpio26_raise(void) { return intel_ich_gpio_set(26, 1); } @@ -1088,7 +1085,7 @@ /** * Suited for Acorp 6A815EPD: socket 370 + intel 815 + ICH2. */ -static int board_acorp_6a815epd(const char *name) +static int board_acorp_6a815epd(void) { int ret;
@@ -1103,7 +1100,7 @@ /** * Suited for Kontron 986LCD-M: socket478 + 915GM + ICH7R. */ -static int board_kontron_986lcd_m(const char *name) +static int board_kontron_986lcd_m(void) { int ret;
@@ -1169,7 +1166,7 @@ /** * Suited for Abit VT6X4: Pro133x + VT82C686A */ -static int via_apollo_gpo4_lower(const char *name) +static int via_apollo_gpo4_lower(void) { return via_apollo_gpo_set(4, 0); } @@ -1177,7 +1174,7 @@ /** * Suited for Soyo SY-7VCA: Pro133A + VT82C686. */ -static int via_apollo_gpo0_lower(const char *name) +static int via_apollo_gpo0_lower(void) { return via_apollo_gpo_set(0, 0); } @@ -1186,7 +1183,7 @@ * Enable some GPIO pin on SiS southbridge. * Suited for MSI 651M-L: SiS651 / SiS962 */ -static int board_msi_651ml(const char *name) +static int board_msi_651ml(void) { struct pci_dev *dev; uint16_t base, temp; @@ -1250,7 +1247,7 @@ * Disable write protection on the Mitac 6513WU. WP# on the FWH is * connected to GP30 on the Super I/O, and TBL# is always high. */ -static int board_mitac_6513wu(const char *name) +static int board_mitac_6513wu(void) { struct pci_dev *dev; uint16_t rt_port; @@ -1282,7 +1279,7 @@ /** * Suited for ASUS A7V8X: VIA KT400 + VT8235 + IT8703F-A */ -static int board_asus_a7v8x(const char *name) +static int board_asus_a7v8x(void) { uint16_t id, base; uint8_t tmp; @@ -1376,7 +1373,7 @@ * - ASUS A7V600-X: VIA KT600 + VT8237 + IT8712F * - ASUS A7V8X-X: VIA KT400 + VT8235 + IT8712F */ -static int it8712f_gpio3_1_raise(const char *name) +static int it8712f_gpio3_1_raise(void) { return it8712f_gpio_set(32, 1); } @@ -1639,7 +1636,7 @@ "board "%s %s"... ", board->vendor_name, board->board_name);
- ret = board->enable(board->vendor_name); + ret = board->enable(); if (ret) msg_pinfo("FAILED!\n"); else
Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Mon Jun 7 16:10:55 2010 (r1036) +++ trunk/flash.h Mon Jun 7 21:06:26 2010 (r1037) @@ -294,7 +294,7 @@
int max_rom_decode_parallel; int status; - int (*enable) (const char *name); + int (*enable) (void); };
extern struct board_pciid_enable board_pciid_enables[]; @@ -698,7 +698,7 @@ extern uint8_t *sb600_spibar;
/* wbsio_spi.c */ -int wbsio_check_for_spi(const char *name); +int wbsio_check_for_spi(void); int wbsio_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); int wbsio_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len);
Modified: trunk/wbsio_spi.c ============================================================================== --- trunk/wbsio_spi.c Mon Jun 7 16:10:55 2010 (r1036) +++ trunk/wbsio_spi.c Mon Jun 7 21:06:26 2010 (r1037) @@ -59,7 +59,7 @@ return flashport; }
-int wbsio_check_for_spi(const char *name) +int wbsio_check_for_spi(void) { if (0 == (wbsio_spibase = wbsio_get_spibase(WBSIO_PORT1))) if (0 == (wbsio_spibase = wbsio_get_spibase(WBSIO_PORT2)))
-
repository service